9 Best Chop Saws for Metal Cutting (November 2026)
The best metal cutting chop saws include the DEWALT Chop Saw for fast blade changes, the Evolution Power Tools 14BLADEST Blade for Cutting for mild steel blade upgrades, and the DEWALT Chop Saw for quick clamping.
On this page (7 sections)
- Which metal cutting chop saws are the best picks?
- The best chop saws for metal cutting
- How do you choose a chop saw for metal cutting?
- Should you choose a 14-inch saw or a smaller model?
- When is an abrasive chop saw the right choice?
- What should you check before changing a blade?
- Which metal chop saw should you choose?
The best chop saw for metal cutting is the DEWALT D28715 for buyers who want a 14-inch saw with quick blade changes, an adjustable fence and a quick-lock vise. For mild steel and a cold-cut blade, the Evolution R355CPS is a strong alternative.
This roundup includes complete saws and replacement blades, so check the product type before you choose. A blade can improve a compatible saw, but it does not replace the saw itself.
Our picks at a glance
-
1
-
2
Best for mild steel blade upgradesEvolution Power Tools 14BLADEST Blade for Cutting
9.6/10 our score
See it on Amazon -
3
- 4
Check itEvolution Power Tools R355CPS 14-Inch Chop Saw
Best for multi-material cold cuts - 5
Check itXmnbl 14 Inch Metal Steel Cutting Saw
Best for a compatible 14-inch saw - 6
Best for compact metal stockCheck it - 7
Check itBenchmark Abrasives Aluminum Oxide Type
Best for spare abrasive wheels - 8
Best for rebar and angle steelCheck it - 9
Check itFOXBC 14 Inch Metal Steel Cutting Saw
Best for a fine-finish replacement blade
Which metal cutting chop saws are the best picks?
The best picks depend on whether you need a complete saw, a cold-cut setup or replacement wheels. We compared the listed features against common metal cutting needs, including clamping, angle cuts and blade compatibility.
| Product | Best for | Blade size | Motor | Cut capacity | Our score |
|---|---|---|---|---|---|
| DEWALT Chop Saw | fast blade changes | 14 in | 15 A | 5 in round; 4-1/2 x 6-1/2 in rectangle | 9.7 |
| Evolution Power Tools 14BLADEST Blade for Cutting | mild steel blade upgrades | 14 in | 9.6 | ||
| DEWALT Chop Saw | quick clamping | 14 in | 2300 W | 9.6 | |
| Evolution Power Tools R355CPS 14-Inch Chop Saw | multi-material cold cuts | 14 in | 15 A | 9.5 | |
| Xmnbl 14 Inch Metal Steel Cutting Saw | a compatible 14-inch saw | 14 in | 9.2 | ||
| VEVOR Chop Saw | compact metal stock | 7-1/4 in | 1200 W | 9.0 | |
| Benchmark Abrasives Aluminum Oxide Type | spare abrasive wheels | 8.7 | |||
| Yumark Abrasive Chop Saw | rebar and angle steel | 14 in | 2200 W | 8.5 | |
| FOXBC 14 Inch Metal Steel Cutting Saw | a fine-finish replacement blade | 14 in | 8.0 |
The best chop saws for metal cutting
These metal cutting chop saws cover abrasive-wheel cutting, toothed cold-cut blades and replacement blades. Confirm your stock material and saw limits before buying.
DEWALT Chop Saw: Best for fast blade changes
- 14-inch blade
- Keyless blade change
- 45-degree adjustable fence
- Quick-lock vise
The keyless blade change, adjustable fence and quick-lock vise suit frequent metal cutting with varied stock sizes.
Pros
- Keyless blade changes
- Adjustable 45-degree fence
- Quick-lock vise
Cons
- Abrasive wheel is included
The DEWALT D28715 is the best fit here if you change wheels often or cut stock in different sizes. Its keyless blade-change system removes the need for a wrench, and the quick-lock vise is designed to clamp different material sizes.
The 45-degree adjustable fence supports angle cuts, while the extra-wide steel base has four pre-drilled holes for bench mounting. DEWALT gives a maximum capacity of 5 inches for round stock and 4-1/2 x 6-1/2 inches for rectangular stock.
It comes with a 14-inch abrasive wheel. Choose this model when you want a dedicated chop saw with quick setup features, and choose a compatible toothed blade separately if your work calls for cold cutting.
Evolution Power Tools 14BLADEST Blade for Cutting: Best for mild steel blade upgrades
- 14-inch blade
- 66 carbide teeth
- For mild steel only
- Compatible with circular and chop saws
This mild-steel blade is a dedicated option for compatible chop saws when you want a cold-cut blade instead of an abrasive wheel.
Pros
- Designed for mild steel
- TCT blade
- Virtually no sparks, according to Evolution
Cons
- Not for galvanized, hardened or high-carbon steel
The Evolution 14BLADEST is a blade rather than a saw, and it is designed for mild steel only. It has 66 carbide teeth, a 1-inch arbor and a maximum speed of 1600 RPM.
Evolution says the TCT blade cuts with very little heat and few burrs, with virtually no sparks. Do not use it for galvanized, hardened or high-carbon steel, and confirm that your saw's speed and arbor match before fitting it.
DEWALT Chop Saw: Best for quick clamping
- 14-inch chop saw
- Quick-lock vise
- 45-degree pivoting fence
- 2300 W motor
A 14-inch DEWALT with a quick-lock vise and pivoting fence fits buyers who need repeatable clamping and angled cuts.
Pros
- Quick-lock vise
- Pivoting 45-degree fence
- Overload protection
Cons
- Abrasive wheel is included
The DEWALT D28730 suits buyers who want quick clamping and angled cuts in a 14-inch saw. Its quick-lock vise holds different material sizes, and the pivoting fence supports cuts up to 45 degrees.
The saw has a 2300 W motor with overload protection and an abrasive wheel is included. Consider it if those clamping and fence features fit your workflow, then verify the exact model and wheel type before purchase.
Evolution Power Tools R355CPS 14-Inch Chop Saw: Best for multi-material cold cuts
- 14-inch multi-material saw
- 32-tooth TCT blade
- Cuts mild steel, wood and plastic
- Cuts up to 45 degrees
Its fitted TCT blade is designed for mild steel and other materials, so it suits shops that switch between metal, wood and plastic.
Pros
- Multi-material cutting
- TCT blade included
- 45-degree miter cuts
Cons
- Maximum capacity varies by stock shape
The Evolution R355CPS is a multi-material chop saw with a fitted 14-inch, 32-tooth TCT blade. It is designed to cut mild steel, wood, plastic and other materials, and the saw can make cuts up to 45 degrees.
For metal work, its appeal is the cold-cut approach: Evolution says the blade cuts mild steel with virtually no heat, burrs or sparks. Its maximum stated capacities differ by stock shape, including 130 mm for round stock and 120 x 120 mm for square stock.
Xmnbl 14 Inch Metal Steel Cutting Saw: Best for a compatible 14-inch saw
- 14-inch replacement blade
- 66 teeth
- For low-RPM metal saws
- 1-inch arbor
This replacement blade is intended for compatible low-RPM metal saws; verify your saw's arbor, speed and blade compatibility first.
Pros
- 66-tooth carbide-tip blade
- Compatibility list includes several 14-inch saws
- For mild steel
Cons
- Not a saw; compatibility must be checked
The Xmnbl is a replacement 14-inch blade, not a chop saw. It has 66 teeth, a 1-inch arbor and a stated maximum speed of 1600 RPM, with compatibility listed for several Evolution models and other 14-inch low-RPM saws.
Match the blade to your saw's arbor and speed, and check the blade's mild-steel limits for your material. Its compatibility information includes the DEWALT DW872, but that does not make it suitable for every DEWALT saw.
VEVOR Chop Saw: Best for compact metal stock
- 7-1/4-inch cold-cut blade
- 1200 W motor
- 0–45-degree angle adjustment
- Quick-adjust clamp
The smaller blade and quick-adjust clamp suit buyers cutting metal square and flat tubes or I-shaped steels within its stated capacity.
Pros
- Angle adjusts from 0 to 45 degrees
- Cold-cut blade included
- Quick-adjust clamping
Cons
- Smaller blade than the 14-inch picks
The VEVOR is a smaller-format metal cutting saw with a 7-1/4-inch stainless steel cold-cut blade and a 1200 W motor. Its clamp is designed for square and flat tubes, steels and I-shaped steels, and its angle setting adjusts from 0 to 45 degrees.
This format may suit lighter or smaller stock where a 14-inch saw feels larger than needed. Check the stated cutting width and thickness against your material before choosing it.
Benchmark Abrasives Aluminum Oxide Type: Best for spare abrasive wheels
- 14-inch Type 1 cut-off wheel
- Aluminum oxide abrasive
- 10-pack
- 1-inch arbor
This 10-pack gives compatible 14-inch chop saws replacement abrasive wheels for general ferrous-metal cutting.
Pros
- 10 wheels in the pack
- Aluminum oxide abrasive
- Fits many 14-inch chop saws
Cons
- Check the saw's required wheel size and maximum RPM
The Benchmark Abrasives Type 1 wheel is a replacement consumable for compatible 14-inch saws. The 10-pack uses aluminum oxide abrasive, measures 14 inches across and has a 3/32-inch thickness with a 1-inch arbor.
It is intended for ferrous metals such as iron, steel, tubes and pipes. Match the wheel's dimensions and maximum speed to your saw before use, and replace worn wheels according to the saw's instructions.
Yumark Abrasive Chop Saw: Best for rebar and angle steel
- 14-inch abrasive saw
- 2200 W motor
- 3800 RPM
- Non-slip base
This corded abrasive saw is aimed at steel bars, rebar, angle steel and hollow tube, with a stable base and material clamp.
Pros
- 2200 W motor
- Non-slip base
- Designed for several steel shapes
Cons
- Abrasive wheel cutting differs from cold-cutting
The Yumark is an abrasive chop saw aimed at cutting steel bars, rebar, angle steel and hollow tube. It has a 2200 W motor, runs at 3800 RPM and includes a material clamping device with a non-slip base.
Pick it if you want a complete 14-inch abrasive saw for common steel shapes. An abrasive wheel cuts differently from a toothed cold-cut blade, so consider the finish and cleanup your work allows.
FOXBC 14 Inch Metal Steel Cutting Saw: Best for a fine-finish replacement blade
- 14-inch blade
- 66 teeth
- Maximum 1800 RPM
- 1-inch arbor
This 66-tooth replacement blade is designed for compatible 14-inch metal saws; match its 1800 RPM limit and 1-inch arbor to your tool.
Pros
- 66-tooth TCG design
- 1-inch arbor
- Compatibility list includes Evolution saws
Cons
- Not a saw; check compatibility and speed
The FOXBC is a 14-inch replacement blade with 66 teeth, a 1-inch arbor and a maximum speed of 1800 RPM. It is designed for compatible metal cutting saws, including several Evolution models.
Check the saw's speed limit carefully before use, since this blade's maximum RPM differs from the Evolution 14BLADEST above. Its maker describes the blade as a fine-finish option for metal stock such as tubing, studs and bars.
How do you choose a chop saw for metal cutting?
Choose a chop saw by matching the blade type, stock size and clamping system to the cuts you make. Start by deciding whether abrasive cutting or a toothed cold-cut blade better fits your material and finishing needs.
Abrasive wheels are consumables that grind through metal. Toothed blades have material limits: the Evolution 14BLADEST, for example, is specified for mild steel only, so don't assume it suits stainless, galvanized or hardened material.
Should you choose a 14-inch saw or a smaller model?
A 14-inch saw gives you a larger blade format and can handle stock within its stated capacity. The DEWALT D28715 lists capacity up to 5 inches round or 4-1/2 x 6-1/2 inches rectangular, while the VEVOR uses a 7-1/4-inch blade for more compact stock.
Measure the widest and thickest material you expect to cut. Also consider the saw base, available bench space and whether the stock can be held securely without extending awkwardly.
When is an abrasive chop saw the right choice?
An abrasive saw can suit general cutting of steel shapes when you accept an abrasive-wheel process and replace wheels as they wear. The DEWALT D28715 and Yumark are complete saw options in this roundup, while Benchmark Abrasives offers replacement wheels.
If your main interest is a cold-cut setup, compare a complete multi-material saw such as the Evolution R355CPS with a compatible saw-and-blade combination. Our guide to chop saw vs miter saw for metal explains why a dedicated metal-cutting tool matters.
What should you check before changing a blade?
Check the blade diameter, arbor size, maximum RPM, material compatibility and the saw manufacturer's instructions. A blade that fits the arbor can still be unsuitable if its speed rating or material limits do not match the saw and workpiece.
For another comparison of metal-cutting tool options, see Best Miter Saw For Cutting Metal and Best Miter Saw For Cutting Metal. These are separate posts, so compare their recommendations with the saw and blade requirements for your own cuts.
Which metal chop saw should you choose?
Choose the DEWALT D28715 if quick blade changes, a wide base and clamping flexibility matter most. Pick the Evolution R355CPS if you want a multi-material saw with a TCT blade for mild steel, or choose a replacement blade only after checking its fit, speed and material limits.
For the best chop saw for metal cutting, start with the stock you cut most often, then match saw capacity and blade type to it. Use the metal chop saw comparison guide to make the final choice.
Our top 3 picks at a glance
-
1
-
2
Best for mild steel blade upgrades
Evolution Power Tools 14BLADEST Blade for Cutting
9.6/10 our score
See it on Amazon -
3
Frequently asked questions
What is the best chop saw for metal cutting?
The DEWALT D28715 is a strong fit if you want a 14-inch saw with a keyless blade change, adjustable 45-degree fence and quick-lock vise. For mild steel with a cold-cut blade, consider the Evolution R355CPS.
Choose based on the material, cut type and blade system you need.
Can a woodworking miter saw cut metal?
A woodworking miter saw is not a direct substitute for a dedicated metal chop saw. Metal cutting needs a blade made for the material and a saw whose speed and setup match that blade.
Read our chop saw vs miter saw for metal guide before choosing a tool.
What is the difference between an abrasive wheel and a cold-cut blade?
An abrasive wheel grinds through metal, while a toothed cold-cut blade shears material with teeth designed for that metal. Evolution says its mild-steel blade makes cuts with little heat, few burrs and virtually no sparks.
Check blade limits and compatibility before fitting either type.
Can I use a 14-inch metal blade on any 14-inch saw?
No. The diameter alone does not confirm compatibility.
Check the saw's arbor, maximum speed, blade type and the blade maker's material limits.
For example, the Evolution 14BLADEST is designed for mild steel and has a 1-inch arbor.
