9 Best Router Tables with Lift Systems (November 2026)
The best router tables with lift systems include the SpeTool Router Lift System for precise height control, the BOSCH RA1181 Benchtop Router Table 27 in. (best complete benchtop table), and the BOSCH Cabinet Style Router Table RA1171 for storage and dust control.
On this page (8 sections)
- Router tables with lift systems for convenient height adjustment
- How we compared router tables with lift systems
- Should you buy a lift kit or a complete router table?
- What motor diameter does your router use?
- How do dust collection options compare?
- Can lift height control replace a plunge base?
- What about miter saw lifting?
- Verdict: which router table with lift system should you buy?
The best router table with lift system for most people is the SpeTool Router Lift System at 9.7, because its 0.001 in control and wide motor fit solve the main pain of under-table adjustment. If you want a complete table instead of a lift only, the BOSCH RA1181 and SKIL combo kit are the safer starting points.
Our score weighs specs, features and buyer feedback against what you are shopping for. A lift earns points for fine adjustment, motor fit, plate size and above-table bit changes.
A complete table earns points for top size, fence, dust collection and included accessories.
This guide compares complete table and lift combinations for convenient height adjustment. We checked motor diameters, plate openings, lift ranges, fence size and dust ports before ranking each pick.
Start with wood routers for woodworking if you are still choosing a router motor. The table and lift only help after the motor fits the plate and the opening.
Our picks at a glance
-
1
-
2
Best complete benchtop tableBOSCH RA1181 Benchtop Router Table 27 in.
9.5/10 our score
See it on Amazon -
3
Best for storage and dust controlBOSCH Cabinet Style Router Table RA1171
9.4/10 our score
See it on Amazon
- 4
Best for repeatable fine adjustmentCheck it - 5
Check itSKIL RT1323-01 Router Table and 10Amp Fixed
Best table and router combo kit - 6
Check itJessEm Rout-R-Lift 3.5XT Router Table Lift System
Best for 3-1/2 in motors - 7
Check itPOWERTEC Router Table Insert Plate Bosch
Best insert plate upgrade - 8
Best budget precision liftCheck it - 9
Check itBOSCH RA1165 Under-Table Router Base with Above-Table
Best for Bosch 1617 owners
Router tables with lift systems for convenient height adjustment
The best router table with lift system depends on whether you already own a table. Lift kits win for precision and upgrades.
Complete tables win for a first setup with fence and dust collection included.
SpeTool Router Lift System: Best for precise height control
- 9-1/4 x 11-3/4 in insert plate
- 0.001 in height adjustment
- 4-1/4 in lift range
- 3 magnetic insert rings
Aluminum lift with 0.001 in adjustment, a 3/8 in plate and 3 insert rings for above-table bit changes.
Pros
- Fits most routers 2-9/16 to 4-1/4 in
- 0.001 in precision control
- Above-table bit changes
Cons
- Lift only, no table included
- 19.8 lb adds weight to a table
SpeTool suits woodworkers who want the finest height control in this group. It offers 0.001 in adjustment with a 20-TPI screw and a zeroing index ring, which helps when you split a cut into small passes.
The lift fits most routers with a body diameter from 2-9/16 in to 4-1/4 in, covering 1.25HP, 2.25HP and 3.25HP motors. For more options, see full-size router lifts.
SpeTool lists direct fit for Makita DRT50, SKIL-RT1323 and Milwaukee 5615 with no adapter needed.
Its 3/8 in solid aluminum plate measures 9-1/4 x 11-3/4 in and includes 3 magnetic insert rings. Double-sealed linear bearings keep motion smooth across a 4-1/4 in lift range.
You can change bits from above the table instead of removing the router from the plate. Two templates are included for customizing a wooden board into a 9-1/4 x 11-3/4 in opening, and the plate also fits Kreg and Oskool tables as listed.
The trade-off is clear: this is a lift only, with no table, fence or dust port. At 19.8 lb it also adds real weight under a benchtop table, unlike lighter lifts below.
BOSCH RA1181 Benchtop Router Table 27 in.: Best complete benchtop table
- 27 x 18 in aluminum top
- 2-1/2 in dust port
- Tall aluminum fence
- Rigid aluminum mounting plate
Complete benchtop table with large aluminum top, tall fence and a 2-1/2 in vacuum port for dust control.
Pros
- Complete benchtop setup
- Large work area
- Featherboards included
Cons
- No built-in lift mechanism
- 30 lb portable weight
BOSCH RA1181 suits a first router table setup on a benchtop. Its 27 x 18 in aluminum top gives you more support area than a lift plate alone, which helps with longer boards and wider panels.
The rigid aluminum mounting plate is pre-drilled for a variety of routers and for above-table height adjustment with many common routers. That means you still need a compatible router and base, rather than a built-in crank lift.
A tall aluminum fence has adjustable faceplates and featherboards for guidance and kickback protection. The accessory slot accepts featherboards and 3/4 in accessories such as a miter gauge.
Dust collection uses a dedicated 2-1/2 in vacuum hose port, so a standard shop vacuum hose fits without a custom adapter. Mounting hardware, two outfeed shims and a starter pin with guard are included.
The trade-off is adjustment: there is no true lift mechanism, so height changes are less convenient than a dedicated router table lift system. For a full lift option, compare our best router lift base guide.
BOSCH Cabinet Style Router Table RA1171: Best for storage and dust control
- Cabinet style design
- Two dust ports
- Laminated top
- Tall fence with featherboards
Cabinet table with laminated top, two dust ports and a tall fence for stable, enclosed routing.
Pros
- Two dust collection ports
- Cabinet storage and stability
- Clear guard included
Cons
- No lift, uses mounting plate
- 35 lb cabinet weight
BOSCH RA1171 suits shop benches where stability and dust management matter more than portability. Its cabinet style design gives a smooth laminated top and enclosed storage below the plate.
Two dedicated dust ports help here, with one at the fence and one at the cabinet. That split helps capture chips at the cut and below the table, which is useful during long moulding runs.
The rigid aluminum mounting plate is pre-drilled for a variety of routers and for above-table height adjustment with many common routers. It includes 3 mounting plate insert rings, 2 featherboards and 2 outfeed shims.
An extra tall aluminum fence with adjustable MDF faceplates handles taller stock. A clear guard, starter pin, starter pin guard and mounting hardware are listed among included components.
The trade-off is weight and lift access: at 35 lb it is the heaviest table here, and it has no crank lift. If you already own a Bosch 1617, the RA1165 base below pairs with this table for above-table adjustment.
Kreg Precision Router Lift: Best for repeatable fine adjustment
- 9-1/4 x 11-3/4 in plate
- 1/64 in adjustment steps
- Hard-anodized aluminum
- Anti-backlash compensation
Precision lift with 1/64 in steps, hard-anodized plate and anti-backlash for repeatable depth settings.
Pros
- Fine 1/64 in adjustment
- Fits Kreg and many other tables
- Scratch resistant plate
Cons
- Lift only, no table
- 10.8 lb lift weight
Kreg suits router table owners who want repeatable fine changes. It allows precise setup changes down to 1/64 in, with anti-backlash compensation so depth changes stay accurate.
The plate is 3/8 x 9-1/4 x 11-3/4 in hard-anodized aluminum, which resists scratches and will not sag like a thinner plate. One full turn of the crank moves the bit 1/16 in, and a micro-adjust scale helps you return to a prior setting.
Kreg says it fits all Kreg router tables and many competitive brands, and it is compatible with 20 or more routers. That wide table fit makes it a good upgrade for an existing 9-1/4 x 11-3/4 in opening.
For motor fit, check the best router motor for router table guide before ordering. A lift only works when the motor diameter and mounting holes match the lift design.
The trade-off is that this is a lift only, with no table, fence or dust collection. At 10.8 lb it is lighter than SpeTool, but it lacks the 0.001 in scale of that pick.
SKIL RT1323-01 Router Table and 10Amp Fixed: Best table and router combo kit
- 10 Amp 2.0 HP router
- Above table adjustment
- 24 in fence
- Integrated bit storage
Combo kit with router table, 10 Amp fixed base router, 24 in fence and above table adjustment.
Pros
- Router and table included
- Above table adjustment
- Both 1/4 and 1/2 in collets
Cons
- 18.82 kg combined weight
- Fixed base only
SKIL RT1323-01 suits buyers who want table and router in one box. It includes the SRT1039 router table and a 10 Amp fixed base router, so you avoid separate motor and plate compatibility checks.
The router is rated at 2.0 HP in the bullet list, with 10 Amp power, soft start, speed control and a live tool indicator. Speed ranges from 10,000 to 25,000 rpm, which lets you match speed to bit size and material.
The table has above the table adjustment, integrated bit storage, an aluminum miter gauge slot, a router clamp, a starter pin and 2 featherboards. A 24 in fence with adjustable MDF faceplates supports taller workpieces.
Included items also list a parallel guide, collet wrench, dust extraction adaptor, 1/4 in and 1/2 in collets, 3 inserts, a miter gauge, hex key, starting pin and screws. That completeness is the main value here.
The trade-off is weight and fixed base design at 18.82 kg combined. It is less precise than a dedicated lift with 1/64 in or 0.001 in control, but it is ready to use as a kit.
JessEm Rout-R-Lift 3.5XT Router Table Lift System: Best for 3-1/2 in motors
- Fits 3-1/2 in motors
- 9-1/4 x 11-3/4 in opening
- 3 insert rings
- Double-sealed bearing spindle
Lift for 3-1/2 in motors with above-table adjustment, 3 twist-out rings and above-table bit changes.
Pros
- No adapter for many 3-1/2 in motors
- Standard opening fit
- Above-table bit changes
Cons
- Motor specific fit
- Lift only, no table
JessEm suits owners of 3-1/2 in router motors who want a standard opening lift. It clamps Porter-Cable 690 and 890, DeWalt 610, 616 and 618, Bosch 1617 and 1618, Skil and Craftsman fixed-base motors with a 3-1/2 in body and no adapter needed.
Makita 1101 and Hitachi M12VC fit with an optional printed collar, so check your exact body size before you order. The 3/8 in insert plate fits standard 9-1/4 x 11-3/4 in openings in JessEm, Kreg and shop-built tables.
A double-sealed bearing spindle raises and lowers the motor smoothly with the included handle. You can dial in depth for dados, rabbets and profiles, then repeat the same cut across many parts.
You can raise the collet through the plate and swap bits from above the table. Three twist-out insert rings at 1-3/8, 2 and 2-1/2 in close the gap around different bit sizes.
The trade-off is motor specificity compared with SpeTool. If your motor is not 3-1/2 in, this lift may need a collar or may not fit at all.
POWERTEC Router Table Insert Plate Bosch: Best insert plate upgrade
- 9-1/4 x 11-3/4 in plate
- 4 reducer rings
- 8 leveling points
- 3/8 in aluminum
Aluminum insert plate with 4 reducer rings, 8 leveling screws and laser-engraved centerlines.
Pros
- Wide router compatibility list
- 8 leveling points
- Screwless ring changes
Cons
- Plate only, no lift
- No height crank
POWERTEC suits existing router table owners who need a level, well-supported plate. It is not a lift, but a 9-1/4 x 11-3/4 in insert plate that fits most commercial router table openings or a custom build.
Four reducer rings are included: solid, 1 in, 1-7/8 in and 2-5/8 in. The screwless design lets you change rings quickly with the included ring wrench, which helps support stock around small bits.
Eight leveling points with leveling screws let you fine tune the plate flush with the table top. Laser-engraved scales with centerline markings on both sides help align workpieces.
The plate is 3/8 in thick precision-stamped aluminum for smooth sliding and durability. A starting pin is included for curved work support.
The trade-off is no height control: you still adjust the router base under the table, so pair it with a lift if above-table changes matter. Compared with lift kits, it improves support and leveling but does not change depth from above.
MUWOOD Router Lift: Best budget precision lift
- 65mm and 69mm motor series
- 1/64 in adjustment
- Hard aluminum alloy
- 7.4 lb weight
Lightweight lift for listed 65mm and 69mm motors with 1/64 in adjustment and aluminum construction.
Pros
- Light at 7.4 lb
- Fine 1/64 in adjustment
- Lists specific motor models
Cons
- Limited to listed motor series
- Lift only, no table
MUWOOD suits budget-minded buyers with a listed compact motor. It offers precise table setup changes as small as 1/64 in in a hard aluminum alloy body that resists scratches.
The lift is listed for a 65mm adapted series including RT0701CX7, RT0700, RT0701, DWE6000, DCW210D1, M12 2401-20 and Jun-10. A 69mm adapted series includes GKF600, XTRO1Z, PLM5007, DWP611 and M12 FUEL 2823-20.
That specific list is both the strength and the limit. If your motor is on the list, fit should be straightforward.
If it is not listed, the safer choice is a wider-fit lift such as SpeTool or JessEm.
At 7.4 lb, it is the lightest lift in this group, so it adds less load to a benchtop table. Package size is 12.2 x 11.3 x 7.4 in, and a precision transmission system is meant to keep adjustments smooth and stable.
The trade-off is table scope: this is a lift only, with no table, fence or dust port. It also lacks the detailed insert ring and plate specs of the higher-ranked lifts.
BOSCH RA1165 Under-Table Router Base with Above-Table: Best for Bosch 1617 owners
- For 1617 and 1618 series
- Above-table hex key adjustment
- 3-3/4 in base opening
- 4-hole and 3-hole patterns
Under-table base for Bosch 1617 and 1618 routers with above-table hex key depth adjustment.
Pros
- Above-table adjustment
- Fits Bosch router tables
- Light at 1.5 lb
Cons
- Bosch 1617 series only
- Base only, no lift plate
BOSCH RA1165 suits Bosch 1617 and 1618 owners who want above-table adjustment without buying a full lift. It is the new base for the 1617 and 1618 series, replacing the RA1164.
Depth adjustment of bit height is done from above the table with an included hex adjustment wrench. That is far easier than reaching under the table, even though it is simpler than a crank lift with a scale.
The base has threaded holes in Bosch 4-hole and common 3-hole subbase patterns for mounting. Bosch lists compatibility with RA1141, RA1171 and RA1181 router tables on this page.
A wide 3-3/4 in base opening allows larger bits, and a quick clamp system lets the motor move for tool-free base changes. Included items are a rubberized grip, base, mounting hardware, chip shield and hex wrench.
The trade-off is narrow fit: it is designed for 1617, 1617EVS, 1617EVSPK and 1618 routers only. For the RA1181 specifically, see our guide to a router lift for bosch ra1181.
How we compared router tables with lift systems
We compared motor fit first, because a lift that does not fit your router is useless. Body diameter matters more than horsepower for fit.
We checked plate size next. Most lifts here use the standard 9-1/4 x 11-3/4 in opening, which fits Kreg, JessEm and many shop-built tables.
Complete tables list their own top size and fence width instead.
We ranked adjustment precision after fit. SpeTool offers 0.001 in control, Kreg and MUWOOD offer 1/64 in steps, and JessEm uses a smooth spindle with a handle.
Complete tables without a lift rank lower for adjustment, even when their tops and fences are strong.
Dust collection and included accessories break ties. The RA1171 has 2 dust ports, the RA1181 has a 2-1/2 in port, and the SKIL kit includes a dust extraction adaptor with collets and featherboards.
What we weighed for each category
Lift kits were weighed on plate thickness, bearing type, insert rings and listed motor models. SpeTool lists double-sealed linear bearings and 3 magnetic rings, while JessEm lists a double-sealed bearing spindle and 3 twist-out rings.
Complete tables were weighed on top material, fence height, accessory slots and storage. The RA1181 lists a 27 x 18 in aluminum top, while the RA1171 lists a laminated top with cabinet storage below.
Combo kits were weighed on whether the router and table are matched from the factory. The SKIL kit lists a specific router model, table model, collets and miter gauge, which reduces separate fit checks.
Insert plates were weighed on leveling points, ring count and compatibility lists. POWERTEC lists 8 leveling points and 4 rings, which helps support stock but does not provide height control.
Should you buy a lift kit or a complete router table?
Buy a lift kit if you already own a decent router table with a standard opening. You get fine height control and above-table bit changes for less than a new table.
Buy a complete table if you have no table, no fence and no dust port. The RA1181 and RA1171 give you a flat top, fence, featherboards and mounting hardware in one purchase.
The SKIL combo kit is the middle path. You get a table and a router together, with above table adjustment, but less fine control than a dedicated lift.
Which choice fits a first setup
A first setup needs a flat top, a fence that guides stock and a way to collect dust. Lift-only picks assume those parts already exist on your table.
A complete table also assumes you have a router that fits its mounting plate. The RA1181 and RA1171 plates are pre-drilled for a variety of routers, but you should confirm your model before ordering.
If you have no router at all, the combo kit removes one compatibility step. You still need to confirm that a fixed base router meets your work, since it does not plunge.
What motor diameter does your router use?
Measure the motor body diameter before you order any lift. SpeTool fits 2-9/16 to 4-1/4 in, JessEm fits 3-1/2 in motors, and MUWOOD lists 65mm and 69mm series.
Fixed base motors usually clamp in a lift. Plunge bases and trim routers often need a different base or a trim router lift made for compact motors.
If your motor is a Bosch 1617 or 1618, the RA1165 base is a simpler above-table option. It works with Bosch tables and avoids a full lift purchase.
How to check fit before you order
Check the motor body diameter, the mounting hole pattern and the table opening size. A lift can fit the motor but still fail if the plate opening does not match your table.
Check whether an adapter or collar is listed for your model. JessEm lists an optional printed collar for Makita 1101 and Hitachi M12VC, while SpeTool lists no adapter needed for its named models.
Check the included insert rings for your bit sizes. Smaller rings support stock around small bits, while larger rings suit bigger cutters and profiles.
How do dust collection options compare?
Dust collection matters more on a router table than on a handheld router, because chips fly at the fence and below the plate. The RA1171 cabinet has ports at both the fence and the cabinet.
The RA1181 benchtop table has one dedicated 2-1/2 in port for a standard vacuum hose. That is simple to connect, but it captures less than a two-port cabinet design.
Lift kits vary. Kreg and JessEm focus on height control, while SpeTool mentions a compatible dust collector design with a 2.5 in port.
For lift-specific dust options, see router lifts with dust collection.
Which dust setup suits long runs
A cabinet with two ports suits longer runs because it captures chips at the fence and below the table. That helps keep the work area clear when you shape several parts in a row.
A single benchtop port suits shorter sessions and simpler hose connections. It still helps, but you may need to clear chips from the plate area more often.
A lift without a dust port relies on your table's existing collection. If your table has no port, adding a lift will not solve dust on its own.
Can lift height control replace a plunge base?
No, a lift replaces under-table adjustment, not plunge action. You set bit height from above the table, lock the motor, then feed the workpiece into the bit.
For relief cuts, templates and freehand work, a plunge base still has a role. For repeatable edge work, dados and rabbets, a lift gives faster and more repeatable depth changes.
Always check bit height with a test piece after a change. Small crank moves and 1/64 in steps can still shift depth when the motor settles.
When a fixed base plus lift works best
A fixed base plus lift works best for edge work, joinery and repeat cuts. The motor stays locked, the lift sets depth and the fence guides the stock.
A plunge base works better when you need to start a cut inside a workpiece. A lift cannot replace that downward plunge action during the cut.
Many shops keep both approaches, using a lift for table work and a plunge base for handheld work. The choice depends on the cuts you make most often.
What about miter saw lifting?
Router table lifts and miter saw lifts are different tools for different cuts. Do not use a router lift guide to lift a miter saw.
If you meant a miter saw, our guides on How To Lift Miter Saw? and How To Lift A Miter Saw Blade? cover those separate tasks.
Verdict: which router table with lift system should you buy?
Pick the SpeTool Router Lift System if you already own a table and want the finest adjustment at 0.001 in with wide motor fit. Pick the BOSCH RA1181 if you need a complete benchtop table with a large top and dust port.
Pick the SKIL RT1323-01 if you want table and router together in one kit.
Pick the Kreg Precision Router Lift if your table opening is standard and you value repeatable 1/64 in changes. Pick the JessEm Rout-R-Lift if your motor is 3-1/2 in, since it clamps many popular fixed-base motors without an adapter.
Pick the BOSCH RA1171 for a cabinet table with two dust ports and storage. Pick POWERTEC for a plate upgrade, MUWOOD for a listed compact motor, and BOSCH RA1165 for a Bosch 1617 or 1618 above-table base.
The decision rule is simple: motor fit first, then table opening, then adjustment precision. Measure your motor and opening before you order, and you will get the lift system that actually makes routing easier.
Our top 3 picks at a glance
-
1
-
2
Best complete benchtop tableBOSCH RA1181 Benchtop Router Table 27 in.
9.5/10 our score
See it on Amazon -
3
Best for storage and dust controlBOSCH Cabinet Style Router Table RA1171
9.4/10 our score
See it on Amazon
Frequently asked questions
What is a router table lift system?
A router table lift system raises and lowers a table-mounted router from above the table. It replaces reaching under the table to lock a fixed base or adjust a plunge base by hand.
Do I need a lift or a complete router table?
Choose a lift if you already own a router table with a 9-1/4 x 11-3/4 in opening. Choose a complete table if you have no table, no fence and no dust port setup yet.
Can I change bits from above the table?
Yes, most lifts on this list raise the collet through the plate. You still need to lock the motor and follow the router manual for safe bit changes.
What motor size fits a lift?
Check motor body diameter first, not horsepower. Many lifts list 3-1/2 in, 65mm or 69mm fits, and some fit a wider range from 2-9/16 to 4-1/4 in.
About this guide: Our look at router tables with lift systems draws on maker specs, materials and what owners report. See how we research.



