6 Best Replacement Blade Guards for Craftsman Miter Saws (November 2026)
The best Craftsman miter saw blade guards include the VEVOR Compound Miter Saw for a new saw with a splash guard, the URYKEC N027988 Lower Guard for listed DeWalt model matches, and the Rawolp N027988 Miter Saw Lower Guard Assy for checking an N027988 alternative.
On this page (6 sections)
- Which Craftsman miter saw blade guard should you choose?
- How do you identify a Craftsman miter saw guard?
- Can a DeWalt N027988 guard fit a Craftsman saw?
- What should you check before replacing a blade guard?
- How we compared replacement blade guards
- Which replacement guard is right for your Craftsman saw?
The best Craftsman miter saw blade guard is the guard assembly that matches your exact saw model and part number. The replacement guards in this roundup identify DeWalt, SawStop or Ryobi models, so none is confirmed here as a Craftsman fit.
A guard is a safety part. Before ordering, find the saw's full model and type on its label, then compare them with the replacement part's compatibility details.
If the model is missing, contact Craftsman or an authorized parts source to confirm the correct assembly.
For a broader overview of replacement components, see our guide to best miter saw parts. If your saw is actually a DeWalt DWS780, compare its model-specific best DeWalt miter saw parts DWS780.
Our picks at a glance
-
1
-
2
-
3
Best for checking an N027988 alternativeRawolp N027988 Miter Saw Lower Guard Assy
9.5/10 our score
See it on Amazon
- 4
Check itURYKEC 2Pcs N027988 Miter Saw Lower Guard
Best for a two-piece DeWalt guard set - 5
Check itSawStop Dust Collection Blade Guard Assembly TSG-DC
Best for SawStop table saw dust collection - 6
Check itGJK 080016005704 Blade Guard Assembly Compatible
Best for specified Ryobi miter saws
Which Craftsman miter saw blade guard should you choose?
Choose a replacement only when its part number and compatibility details match your Craftsman saw's exact model and type. The products below are useful comparisons, but their stated fit is for other brands or a complete saw.
VEVOR Compound Miter Saw: Best for a new saw with a splash guard
- 2-in-1 miter and table saw
- Built-in laser guide
- Protective splash guard
This is a complete saw rather than a Craftsman replacement guard. Its protective splash guard makes it relevant if you're weighing a new saw instead of repairing an older one.
Pros
- Protective splash guard
- Built-in laser guide
- Miter and table saw functions
Cons
- Not a Craftsman replacement guard
- Model and fit details need comparison before buying
The VEVOR Compound Miter Saw is a complete saw, not a Craftsman replacement guard. It includes a protective splash guard and a built-in laser guide, so it may be relevant if you're comparing repair with replacing a saw.
The saw combines miter and table saw functions and uses an 8-1/4 in blade. Its listed features include adjustable angles and a corded electric power source.
Those details don't guarantee compatibility with Craftsman parts. Treat it as a new-saw option only, and compare its model and cutting setup with your needs before choosing it.
URYKEC N027988 Lower Guard: Best for listed DeWalt model matches
- Part number N027988
- Fits specified DeWalt models
- ABS material
A lower guard for the DeWalt models named in its compatibility details. It is not identified for Craftsman saws.
Pros
- Part number is clear
- Detailed DeWalt model list
Cons
- No Craftsman model listed
- Confirm the saw's exact type and part number
The URYKEC N027988 lower guard is for specified DeWalt saws, including DWS779, DWS780 and DWS782 variants. Its part number is N027988, and its stated size is 14 x 8 x 2.5 in.
The compatibility list includes model types, such as DWS780 Type 1 and Type 20. That level of detail shows why the full model and type matter when matching a replacement guard.
No Craftsman model appears in its compatibility details. Don't order it for a Craftsman saw unless the manufacturer or a parts source confirms the match.
Rawolp N027988 Miter Saw Lower Guard Assy: Best for checking an N027988 alternative
- Part number N027988
- Names DeWalt models
- Lower guard assembly
This lower guard names several DeWalt saws and part number N027988. Its compatibility details do not identify Craftsman models.
Pros
- Names the replacement part number
- Lists several compatible DeWalt models
Cons
- No Craftsman model listed
- Check the complete model and type before ordering
Rawolp's N027988 lower guard names several DeWalt models, including DHS716, DWS782, DWS780, DWS779 and DHS790. The part number matches the URYKEC guard above, but the brand and package are different.
Its compatibility details include specific type numbers for some of the named models. Compare the entire model marking on your saw, rather than relying on a shared brand or a similar-looking guard.
This part is not identified for Craftsman. It makes sense only if you have a compatible DeWalt model and confirm its part number.
URYKEC 2Pcs N027988 Miter Saw Lower Guard: Best for a two-piece DeWalt guard set
- Two-piece set
- Part number N027988
- Names DeWalt models
This two-piece N027988 set lists several DeWalt models. The compatibility details don't name Craftsman saws, so verify before considering it.
Pros
- Two guards in the set
- Names compatible DeWalt models
Cons
- No Craftsman model listed
- Confirm whether your saw needs one or two pieces
This URYKEC option is a two-piece N027988 set. Its compatibility details name DWS780, DWS779, DHS790, DWS715, DHS716 and DWS782, along with several type variants.
The set's quantity may matter if you're replacing more than one guard component, but the product name alone doesn't show which pieces your saw needs. Compare the parts diagram for your exact model.
Craftsman compatibility isn't stated. For other brand comparisons, see best replacement blade guards for miter saws.
SawStop Dust Collection Blade Guard Assembly TSG-DC: Best for SawStop table saw dust collection
- Above-table dust collection
- Independent lateral guards
- 1.5 in dust port
This guard assembly is designed for SawStop cast-iron table saws and connects to a dust collection system. It is not a Craftsman miter saw guard.
Pros
- Dust port included
- Independent lateral guards
Cons
- For SawStop table saws
- Not a Craftsman miter saw replacement
The SawStop TSG-DC is an above-table dust collection guard for compatible SawStop cast-iron table saws. It has independent lateral guards and a 1.5 in dust port, so its purpose differs from a lower guard on a Craftsman miter saw.
SawStop identifies it as incompatible with the Jobsite Saw. That restriction is a reminder to check the exact saw family, not just the word "blade guard."
This assembly isn't a Craftsman miter saw replacement. Consider it only if you're shopping for the SawStop table saw use it was designed for.
GJK 080016005704 Blade Guard Assembly Compatible: Best for specified Ryobi miter saws
- Part number 080016005704
- Compatible with named Ryobi models
- Blade guard assembly
This assembly is identified for two Ryobi miter saw models. It does not list Craftsman models.
Pros
- Part number is specified
- Names compatible Ryobi models
Cons
- No Craftsman model listed
- Check model compatibility before ordering
The GJK blade guard assembly uses part number 080016005704 and names Ryobi TSS102L and TS1345L miter saws as compatible models. It isn't presented as a universal 10 in guard.
That specific model list is more useful than matching by blade size alone. A 10 in blade does not guarantee that a guard's shape, mounting points or movement will fit another saw.
No Craftsman model is named. Confirm your saw's full model number before choosing any replacement.
How do you identify a Craftsman miter saw guard?
Find the full model number and type on the saw label, then use the parts diagram for that exact version to identify the guard assembly and part number. Craftsman saws can differ across model generations, so a guard that appears similar may not mount or move correctly.
Check these details before ordering:
- Model and type: Record every letter, number and type marking from the saw label.
- Part number: Match the guard assembly number from the model's parts diagram.
- Guard section: Confirm whether you need the lower guard, upper guard or a complete assembly.
- Movement: Make sure the replacement is meant for the saw's design and does not obstruct its guard action.
- Return terms: Review the seller's return policy in case a verified part number is unavailable or superseded.
If you can't find a part number, contact Craftsman support or a parts supplier with the complete model marking. A photo can help them identify the right diagram, but it does not replace confirming the part number.
Can a DeWalt N027988 guard fit a Craftsman saw?
The N027988 products here list DeWalt models, not Craftsman models, so their compatibility with Craftsman saws is unconfirmed. Don't treat a shared blade size or similar guard shape as proof of fit.
The URYKEC and Rawolp options name DeWalt models such as DWS780, DWS779 and DWS782. Their compatibility details do not name a Craftsman model or provide a cross-reference to a Craftsman part number.
If a parts supplier says the N027988 fits your saw, ask them to confirm that claim against your exact Craftsman model and type. Keep the response and compare the mounting points and guard movement before using the saw.
What should you check before replacing a blade guard?
Check the saw model, replacement part number and guard function before installing a new assembly. A guard must fit and move as intended for your specific saw.
Unplug the saw before inspecting or servicing it. Follow the manual's instructions for removing and installing the guard, and don't operate the saw if the guard is missing, damaged or binding.
After installation, check the movement by hand only as directed in the manual. If the guard catches, rubs the blade or fails to return as designed, stop and get help from a qualified repair service.
For other miter saw brands, our guide to best Kobalt replacement parts for miter saws covers another model-specific parts search. If a damaged blade also needs replacing, read how much a replacement miter saw blade costs and compare options in our best miter saw blade guide.
How we compared replacement blade guards
We compared the stated part numbers, compatible model lists and intended saw types for each product.
Our score weighs specs, features and buyer feedback against what you're shopping for. Since the products here do not identify a confirmed Craftsman replacement, use the model and part number as your deciding check.
Which replacement guard is right for your Craftsman saw?
For a Craftsman miter saw, buy only a guard assembly confirmed for the exact model and type printed on the saw. The N027988 guards here name DeWalt models, the GJK assembly names Ryobi models, and the SawStop guard is for table saws.
If you can't verify a matching Craftsman part number, pause before ordering and contact Craftsman support or a parts supplier. A confirmed model match is the clearest way to choose a safe replacement.
FAQ
Are miter saw blade guards interchangeable?
No, a guard isn't interchangeable just because two saws share a blade size. Mounting points, guard shape and movement can differ by model.
Match the replacement part number to the saw's exact model and type, and confirm with Craftsman or a parts supplier if the match is unclear.
What is the N027988 lower guard for?
N027988 is the part number named by the URYKEC and Rawolp lower guards in this roundup. Their compatibility details list specific DeWalt miter saw models, including DWS780, DWS779 and DWS782 variants.
They do not identify Craftsman models.
Can I use a miter saw without its blade guard?
Don't operate a miter saw with a missing, damaged or binding guard. Unplug the saw before inspection, follow its manual for service, and have a qualified repair service check it if the guard does not move as intended.
How do I find my Craftsman miter saw model number?
Look for the model label on the saw and record the full model and type markings. Use those details to find the matching parts diagram and guard part number.
If the label is worn or the diagram is unclear, ask Craftsman support or a parts supplier to confirm the match.
Is a lower guard the same as a blade guard assembly?
"Blade guard assembly" can refer to a set of parts, while "lower guard" names one section of the guard. Check the parts diagram for your exact saw to see whether the required replacement is the lower guard alone or a broader assembly.
Our top 3 picks at a glance
-
1
-
2
-
3
Best for checking an N027988 alternative
Rawolp N027988 Miter Saw Lower Guard Assy
9.5/10 our score
See it on Amazon
