5 Best Miter Saw Blade Guards (November 2026)
The best replacement miter saw blade guards include the URYKEC N027988 Lower Guard for a broad DeWalt model range, the Rawolp N027988 Miter Saw Lower Guard Assy for a second N027988 option, and the URYKEC 2Pcs N027988 Miter Saw Lower Guard for buyers needing two guards.
On this page (8 sections)
- Which replacement miter saw blade guard fits your saw?
- Is the Rawolp N027988 guard another DeWalt option?
- Does the two-piece URYKEC guard suit your repair?
- Which guard is made for Ryobi miter saws?
- Is the SawStop TSG-DC a replacement for a miter saw?
- How we compared replacement guards
- What should you check before ordering a replacement guard?
- Which miter saw blade guard should you choose?
The best miter saw blade guard is a replacement confirmed for your saw’s exact model and type. The URYKEC N027988 lower guard is the top pick for the DeWalt models it names, while the GJK assembly is for specified Ryobi saws.
A blade guard is a safety component, so compatibility matters more than a broad “fits most” promise. Check your saw’s model label, guard part number and manual before choosing a replacement.
Our picks at a glance
-
1
-
2
Best for a second N027988 optionRawolp N027988 Miter Saw Lower Guard Assy
9.5/10 our score
See it on Amazon -
3
Best for buyers needing two guardsURYKEC 2Pcs N027988 Miter Saw Lower Guard
9.3/10 our score
See it on Amazon
- 4
Check itGJK 080016005704 Blade Guard Assembly Compatible
Best for listed Ryobi saws - 5
Check itSawStop Dust Collection Blade Guard Assembly TSG-DC
Best for compatible SawStop table saws
Which replacement miter saw blade guard fits your saw?
The URYKEC N027988 Lower Guard ranks first because its compatibility details name several DeWalt models and types. Choose by the exact model and type printed on your saw, not by brand alone.
URYKEC N027988 Lower Guard: Best for a broad DeWalt model range
- Replacement part number N027988
- Fits several listed DeWalt models and types
- ABS material
- 14 x 8 x 2.5 in
A lower guard replacement for a range of listed DeWalt miter saw models. Match the saw model and type before ordering.
Pros
- Long list of compatible models and types
- Part number is stated
- Size is stated
Cons
- Compatibility is limited to the listed models and types
The URYKEC N027988 Lower Guard is listed for DHS716, DHS790, DW716, DWS779, DWS780 and DWS782 variants, including several specified Type 20 models and DWS780 Type 1. Its part number is N027988, which gives you a specific reference to compare with your existing guard.
The guard is made from ABS and measures 14 x 8 x 2.5 in. Those dimensions can help you compare the replacement with the old part, but they do not replace a model match.
Before you order, read the full model and type from the saw’s label. If the label or manual gives a different part number, use that information to check fit.
Is the Rawolp N027988 guard another DeWalt option?
Yes. The Rawolp N027988 is another lower guard option for the DeWalt models it names, with overlapping compatibility against the URYKEC pick.
Rawolp N027988 Miter Saw Lower Guard Assy: Best for a second N027988 option
- Replacement part number N027988
- Fits listed DeWalt miter saw models
- Model types are specified in the description
This lower guard is another N027988 option for compatible DeWalt saws. Its model coverage overlaps with the URYKEC pick, so compare the exact type and part number.
Pros
- Part number is stated
- Several DeWalt models are named
- Types are specified in the description
Cons
- Compatibility still needs a model and type match
Rawolp identifies its replacement as part number N027988 and names DHS716, DWS782, DHS790, DWS779 and DWS780. The description also lists model types, including DHS716 Type 20, DHS790 Type 20, DW716 Type 20, DWS779 Type 20, DWS780 Types 1 and 20, and DWS782 Type 20.
That overlap makes the exact model and type check especially useful. Compare the part number on your existing guard or in your saw manual before deciding between the two N027988 options.
The package quantity is one. This pick makes sense if you need a single lower guard and your saw appears in its compatibility details.
Does the two-piece URYKEC guard suit your repair?
The two-piece-style URYKEC guard may suit buyers looking for that package style, but you should verify the contents and fit for your saw before buying.
URYKEC 2Pcs N027988 Miter Saw Lower Guard: Best for buyers needing two guards
- Two-piece style
- Replacement part number N027988
- ABS material
- 14 x 8 x 2.5 in
This two-piece-style N027988 guard is aimed at the same listed DeWalt model family as the single-guard options. Confirm what the package includes and that your saw type is listed.
Pros
- Two-piece style is stated
- Part number and dimensions are stated
- Several compatible model types are named
Cons
- Check package contents and fit before ordering
This guard also uses part number N027988 and names a range of DeWalt models, including DWS780, DWS779, DHS790, DHS716 and DWS782. The compatibility details include several model types, so compare the full designation on your saw.
URYKEC describes the guard as ABS and gives dimensions of 14 x 8 x 2.5 in. The style is marked “2 pcs,” while the included component is described as an N027988 lower guard.
Confirm what the package contains if the number of pieces affects your repair.
This option is a closer fit for a buyer who wants the stated two-piece style and has confirmed the model match. For other repair needs, see our guide to best miter saw parts.
Which guard is made for Ryobi miter saws?
The GJK 080016005704 assembly is the Ryobi-specific choice here, for the TSS102L and TS1345L models named in its compatibility details.
GJK 080016005704 Blade Guard Assembly Compatible: Best for listed Ryobi saws
- Replacement assembly number 080016005704
- Compatible with Ryobi TSS102L and TS1345L
- For a 10 in miter saw
The GJK assembly is the Ryobi-specific option in this group. Its compatibility details name the TSS102L and TS1345L, so check your saw’s model before choosing it.
Pros
- Ryobi model numbers are named
- Assembly number is stated
- Designed for a 10 in miter saw
Cons
- Compatibility is limited to the listed Ryobi models
GJK identifies the assembly number as 080016005704 and describes it as a guard assembly for a 10 in Ryobi miter saw. The compatibility details name the TSS102L and TS1345L, while the product description also refers to TSS1345L.
Because those model names are not written consistently across the details, compare your saw’s model number with the exact fit information before ordering. If your model is not named, do not assume that a similar Ryobi saw will fit.
The assembly is the only pick in this group specifically presented for the named Ryobi models. DeWalt owners can compare the best Craftsman miter saw blade guard only if their actual saw model is included in that guide’s compatibility details.
Is the SawStop TSG-DC a replacement for a miter saw?
No. The SawStop TSG-DC is a dust collection blade guard assembly for compatible SawStop cast-iron table saws, so it does not fit the miter saw replacement use covered by the other picks.
SawStop Dust Collection Blade Guard Assembly TSG-DC: Best for compatible SawStop table saws
- Above-table dust collection
- Independent lateral guards
- Includes a 1.5 in dust port, blade guard and limiting rod
- Not compatible with the Jobsite Saw
This is a SawStop table saw dust collection guard assembly, not a replacement miter saw guard. Consider it only if you are shopping for its compatible SawStop cast-iron table saws.
Pros
- Dust port and limiting rod are included
- Independent lateral guards are described
Cons
- Not a miter saw replacement guard
- Not compatible with the SawStop Jobsite Saw
SawStop describes the TSG-DC as an above-table dust collection accessory. It includes a blade guard, a 1.5 in dust port and a limiting rod, and it uses independent lateral guards.
The accessory is for a 1.75 HP cast-iron SawStop table saw and comes standard on 3 HP and larger cast-iron models. SawStop says it is not compatible with the Jobsite Saw.
Its inclusion here is useful as a compatibility boundary: a product called a blade guard assembly is not automatically a miter saw guard. For a miter saw, choose a part that names your saw model.
How we compared replacement guards
We compared the stated model compatibility, part numbers, guard type and dimensions where those details were available. Our score weighs those details against the needs of someone replacing a damaged miter saw guard.
A compatible model list is the key buying detail. For example, the N027988 options name several DeWalt models, while the GJK assembly names two Ryobi models.
The SawStop accessory is for compatible table saws, so it ranks last for this miter saw search.
Use the same model-first approach for other parts. Our guide to best Kobalt replacement parts for a miter saw can help if you have a Kobalt saw.
What should you check before ordering a replacement guard?
Confirm the saw model, guard part number and guard type before buying. These checks reduce the chance of choosing a similar-looking assembly that does not fit your saw.
- Read the complete model number and type from the saw label.
- Compare the guard’s part number with the manual or the existing component.
- Check whether the replacement is a lower guard or a larger assembly.
- Confirm dimensions when they are provided, while treating model compatibility as the main fit check.
- Follow the saw manual for installation and safe operation.
A saw may have other worn components alongside a damaged guard. If you are replacing more than one part, our guide to miter saw guide rails covers a separate fit question.
If the blade itself needs replacing, compare options in best miter saw blade and review how much a replacement miter saw blade costs.
Which miter saw blade guard should you choose?
Choose the URYKEC N027988 if your exact DeWalt model and type appear in its compatibility details. For a DW705, compare DeWalt DW705 replacement parts.
The Rawolp is another single-guard N027988 option for overlapping DeWalt models, while the two-piece-style URYKEC is for buyers who have confirmed its package and fit.
Pick the GJK assembly only for the listed Ryobi models. The SawStop TSG-DC is for compatible cast-iron table saws, so it is not a miter saw guard replacement.
Our top 3 picks at a glance
-
1
-
2
Best for a second N027988 option
Rawolp N027988 Miter Saw Lower Guard Assy
9.5/10 our score
See it on Amazon -
3
Best for buyers needing two guards
URYKEC 2Pcs N027988 Miter Saw Lower Guard
9.3/10 our score
See it on Amazon
Frequently asked questions
How do I choose a replacement miter saw blade guard?
Match the guard’s part number and compatible model to your saw’s nameplate or manual. Check the model type too when it is specified, since a familiar model name alone may not confirm fit.
If the guard style or attachment point differs, pause and verify compatibility before ordering.
Can I use a guard made for a different miter saw brand?
Only if the replacement explicitly names your saw model as compatible. The options here name different DeWalt and Ryobi models, and those model lists should guide your choice.
A similar shape or blade size does not guarantee a safe fit.
Is the SawStop TSG-DC a miter saw blade guard?
No. The TSG-DC is described as a dust collection blade guard assembly for compatible SawStop cast-iron table saws.
It is not a miter saw replacement guard, and it is not compatible with the SawStop Jobsite Saw.
When should I replace a miter saw guard?
Replace a damaged or worn guard with a part confirmed for your exact saw model. A guard is a safety component, so do not use a saw with a missing, binding or incorrectly fitted guard.
Follow the saw maker’s manual for installation and operation.
