6 Best Replacement Parts for the DeWalt DW705 (November 2026)

The best DeWalt DW705 replacement parts include the palart 380452-00 Miter Saw Handle Clamshell Set for DW705 Types 1–5, the folosem 3380452-00 Miter Saw Handle Clamshell Set for verified part-number matching, and the FBULWSEC 380452-00 Miter Saw Parts for DeWalt for DW705 and 3660 cross-compatibility.

On this page (7 sections)

1. Which DeWalt DW705 parts are the best match?
2. Best DeWalt DW705 handle parts for Types 1–5
3. Which DW705 handle fits Types 6–8?
4. Is a zero-clearance insert useful for a DW705?
5. What should you check before ordering DW705 parts?
6. Are DeWalt DW705 replacement parts interchangeable?
7. What are the best DeWalt miter saw parts DW705 owners can buy?

The best DeWalt miter saw parts DW705 owners can buy depend on the saw's type number. That one detail decides whether you need an early handle housing, a later handle housing or an insert for the blade opening.

For DW705 Types 1-5, the palart 380452-00 handle is the strongest match. It is built around the 380452-00 reference and includes both handle halves.

Later Types 6-8 need a 395674-02 or 396375-00 handle reference. Those housings cover different variants, so they should not be treated as the same part as the early handles.

The Carve Tech insert addresses the cutting surface instead of the handle. It is a separate type of repair for the area around the blade.

A DW705 part search can return several similar clamshell housings. The key checks are the type number, the replacement part number and whether you need both handle halves or a different accessory.

Model name alone will not tell you enough. Two saws can both say DW705 and still need different housings.

Package contents matter too. Many of these sets include the housing halves but not the trigger switch or mounting hardware.

Set up starts with the nameplate. Read the full model and type marking before you compare any product listing.

Care during the repair is simple but important. Keep the old screws and switch together until the new housing is fitted and checked.

For a broader overview, compare these best miter saw parts before choosing a model-specific replacement.

Owners of newer DeWalt saws can also compare the best DeWalt miter saw parts DWS780 and best DeWalt miter saw parts DW718 guides.

Those guides can help if you own more than one saw or want to see how DeWalt part ranges differ by model.

Our picks at a glance

1. 1
   Best for DW705 Types 1–5

   palart 380452-00 Miter Saw Handle Clamshell Set

   9.7/10 our score

   See it on Amazon
2. 2
   Best for verified part-number matching

   folosem 3380452-00 Miter Saw Handle Clamshell Set

   9.6/10 our score

   See it on Amazon
3. 3
   Best for DW705 and 3660 cross-compatibility

   FBULWSEC 380452-00 Miter Saw Parts for DeWalt

   9.4/10 our score

   See it on Amazon

4. 4

   folosem 395674‑02 396375‑00 Miter Saw Handle Housing

   Best for later DW705 variants
   Check it
5. 5

   FBULWSEC 395674-02 Miter Saw Handle Replacement

   Best for a direct later-model handle swap
   Check it
6. 6

   Carve Tech Zero Clearance Insert

   Best for a cleaner DW705 cutting surface
   Check it

Which DeWalt DW705 parts are the best match?

The palart 380452-00 is the best overall match for a DW705 Type 1-5 with a broken handle. It fits that repair directly and includes both handle halves.

The later-model folosem 395674-02 housing is the better fit for listed Types 6-8 and related DW705 variants. Those versions use a different part reference, so the early handle is not the right choice for them.

The Carve Tech insert sits in a different category. It is aimed at the blade opening and flush cutting surface rather than the handle.

We compared the stated model coverage, part-number references, included housing pieces and the type of repair each part addresses. That comparison helps separate handle repairs from surface accessories.

Our score weighs specs, features and buyer feedback against what you're shopping for.

A handle housing suits an owner whose grip is cracked, missing or loose. An insert suits an owner whose handle is sound but whose throat area is worn.

Type number remains the first filter in every case. Part number is the second filter, and package contents come next.

If the switch or wiring is damaged, a housing alone may not finish the job. Check those parts before you order.

Best DeWalt DW705 handle parts for Types 1–5

The 380452-00 options are intended for several DW705 Types 1–5, but the package details differ slightly. Confirm the type on your saw and plan to reuse the trigger switch and mounting hardware where required.

1

palart 380452-00 Miter Saw Handle Clamshell Set: Best for DW705 Types 1–5

9.7/10Our score

• Fits DW704 and DW705 Types 1–5
• Includes both handle halves
• Uses 380452-00 part number
• Mounting hardware and trigger switch not included

This clamshell set is the clearest match for a DW705 Type 1–5 with a broken or missing handle. It includes both housing halves, so you can restore the handle without replacing the whole saw.

See it on Amazon

Pros

• Direct fit for listed DW705 Types 1–5
• Both handle halves included
• Also fits DW704 and selected 3660 and 3680 types

Cons

• Mounting hardware is separate
• On/off trigger switch is not included

The palart 380452-00 Miter Saw Handle Clamshell Set is the top pick for a broken or missing handle on a listed DW705 Type 1-5. It includes both handle halves, which lets you replace the damaged housing rather than searching for only one side.

The set also fits listed DW704, 3660 and 3680 types. That wider coverage can help if you are comparing parts across older DeWalt and Black & Decker models, but the exact type still needs to match.

Both sides matter in daily use because the handle is the main grip for pulling the saw down. A complete housing restores that grip without replacing the whole tool.

Mounting hardware and the on/off trigger switch are not included. Before disassembly, check whether your existing hardware and switch are safe to reuse.

Keep the old hardware in a labeled container while you work. That makes it easier to compare fit and spot any missing pieces.

If the handle damage affects the switch or its wiring, a housing alone may not complete the repair. Inspect those parts closely before you start.

Choose this part when the nameplate confirms a DW705 Type 1, 2, 3, 4, 4A or 5 and the 380452-00 reference matches your search.

2

folosem 3380452-00 Miter Saw Handle Clamshell Set: Best for verified part-number matching

9.6/10Our score

• Fits DW704 and DW705 Types 1–5
• Left and right housing halves
• Corresponds to 3380452-00
• Wire routing guides match the replacement housing

The folosem set is a strong choice when your DW705 nameplate and old handle match part number 3380452-00. Photograph the wiring before disassembly because the original trigger switch and hardware must be reused.

See it on Amazon

Pros

• Clear type-number guidance
• Both clamshell halves included
• Wiring grooves support reassembly

Cons

• Trigger switch is separate
• Mounting hardware is not included

The folosem 3380452-00 Miter Saw Handle Clamshell Set is another strong Type 1-5 option. It includes the left and right housing halves and uses the 3380452-00 part reference.

Its installation guidance calls attention to wire routing inside the old handle. Photograph the wiring before removing the original housing, then follow the existing routing during reassembly.

This is especially useful if the old handle is cracked but the switch and wiring are still usable. The new housing gives you a clean shell while the original electrical parts are retained.

The handle set covers listed DW704 and DW705 Types 1-5, as well as selected 3660 and 3680 types. It is a good choice when your saw's type number is confirmed and the 3380452-00 reference matches the needed housing.

Match the type on the nameplate rather than relying on the DW705 name alone. That step prevents ordering a housing for the wrong generation.

The mounting hardware and on/off trigger switch are separate. Keep those parts together during the repair so you can compare their position with the replacement housing.

Lay out the old and new halves side by side before final assembly. That check helps confirm that the routing guides and mounting points line up.

3

FBULWSEC 380452-00 Miter Saw Parts for DeWalt: Best for DW705 and 3660 cross-compatibility

9.4/10Our score

• Fits DW704 and DW705 Types 1–5
• Fits selected 3660 and 3680 models
• Both housing sides included
• Uses 380452-00 handle reference

This handle housing suits a DW705 owner who also wants a part shared with selected 3660 or 3680 saws. Confirm the exact type before ordering because compatibility is model specific.

See it on Amazon

Pros

• Broad listed model coverage
• Both housing sides included
• Useful for several older DeWalt-family saws

Cons

• Assembly hardware is separate
• Trigger switch is not included

The FBULWSEC 380452-00 Miter Saw Parts for DeWalt suit a DW705 owner who wants a housing with coverage across several older saw families. The stated compatibility includes DW704 and DW705 Types 1-5, plus selected 3660 and 3680 models.

Both sides of the housing are included. That makes it suitable when the whole clamshell is damaged rather than only one half.

The mounting or assembly hardware and on/off trigger switch are not included, so this part works best when those components from the original handle remain usable. Plan to reuse them and check them for wear before refitting.

The compatibility information also includes several DW705 variants, such as DW705-220 and DW705S types. Read the full model and type marking before ordering because the housing is not intended as a universal fit for every power tool.

This wider list can be helpful in a workshop with more than one older saw. It can also be confusing if you only check the DW705 name.

Pick it when the saw matches the 380452-00 reference and you want an alternative to the palart or folosem Type 1-5 housings.

Which DW705 handle fits Types 6–8?

The 395674-02 and 396375-00 handle assemblies are the relevant choices for the listed later DW705 types. They cover different variants from the Type 1–5 housings, so a type-number check is essential.

4

folosem 395674‑02 396375‑00 Miter Saw Handle Housing: Best for later DW705 variants

9.1/10Our score

• Fits DW705 Types 6–8
• Covers selected DW705 regional variants
• References 395674-02 and 396375-00
• Includes both housing halves

Choose this housing when the DW705 is a later Type 6, 7 or 8 model, or one of the listed AR, B2, B3, BR or S variants. Its part-number match matters more than the general DW705 name.

See it on Amazon

Pros

• Covers later DW705 types
• Part-number references are clear
• Includes both housing halves

Cons

• Not a universal DW705 fit
• Trigger switch and mounting hardware are separate

The folosem 395674-02 396375-00 Miter Saw Handle Housing is the best later-model choice when your DW705 is a listed Type 6, 7 or 8. It also covers selected DW705-AR, DW705-B2, DW705-B3, DW705-BR and DW705S variants.

The package includes both housing halves and references the 395674-02 and 396375-00 part numbers. Those references are the main way to tell it apart from the early Type 1-5 housings.

Its detent override mechanism is intended to support the miter angle lock function found in the compatible handle design. In daily use, that function is part of how the handle helps with angle selection and locking.

As with the other clamshell options, photograph the wiring before disassembly. The trigger switch and other original components may need to be retained, so do not discard the old handle until you have checked every part.

Keep the removed screws and small parts separate during the swap. That habit makes reassembly neater and helps you notice anything missing.

Choose this housing when the model variant and type match the compatibility range. If the saw is a DW705 Type 1-5, use one of the 380452-00 options instead.

5

FBULWSEC 395674-02 Miter Saw Handle Replacement: Best for a direct later-model handle swap

8.8/10Our score

• Fits listed DW705 and DW705S types
• References 395674-02 and 396375-00
• Clamshell handle assembly
• Includes a screw

This assembly targets later DW705 variants that use the 395674-02 or 396375-00 handle reference. Check the type and variant on the saw before choosing it over the folosem housing.

See it on Amazon

Pros

• Targets later DW705 versions
• Part numbers match common replacement references
• Includes a screw

Cons

• Compatibility is type specific
• The data does not identify every mounting component

The FBULWSEC 395674-02 Miter Saw Handle Replacement is another option for listed DW705 Types 6-8 and related variants. It references both 395674-02 and 396375-00, making those numbers useful when comparing an old handle with a replacement.

The package contains one clamshell handle assembly and includes a screw. That screw is a small detail, but it shows why you should still check what else is included before you order.

Its stated compatibility covers DW705, DW705S, DW705-B2, DW705-B3, DW705-BR and DW705-AR types within the specified range. The exact type and variant on your nameplate should match that list.

This part is a better match for a direct later-model handle swap than for an early DW705. It is aimed at owners whose saw already uses the later handle reference.

Confirm the complete type and variant before ordering, particularly if the saw is marked DW705S or one of the regional variants. A partial match is not enough for a housing that must fit precisely.

Photograph the wiring and keep the old switch and hardware until the new assembly is checked. That approach protects you if a retained part needs to go back in.

If the old handle has a loose angle lock or cracked grip, this type of assembly is the relevant repair. It will not help with a worn blade opening.

Is a zero-clearance insert useful for a DW705?

A zero-clearance insert can help address the area around the blade opening, but it does not replace a broken handle. It is a repair for the cutting surface, not for the grip.

The Carve Tech insert is specified for the DW705 and is intended to sit flush with the base. That flush fit is meant to support the work more evenly around the blade.

It is made from MDF and can be customized for the blade size. You should follow the fitting instructions and confirm the shape for your saw.

Choose it when the handle is sound but the throat area is worn or allowing small offcuts to fall through. It is not the right part for a cracked DW705 handle.

6

Carve Tech Zero Clearance Insert: Best for a cleaner DW705 cutting surface

8.6/10Our score

• Compatible with DW705
• Sits flush with the base
• Can be customized for the blade
• Designed to reduce tear-out and noise

This insert is not a handle repair, but it can help a DW705 owner address the worn or damaged area around the blade opening. Its zero-clearance design is intended to support cleaner cuts and smaller offcuts.

See it on Amazon

Pros

• Fits the DW705 among several DeWalt models
• Flush-base design
• Can be customized for blade size

Cons

• Not a replacement handle
• The data does not specify the cutting process for fitting it

The Carve Tech Zero Clearance Insert gives DW705 owners an accessory option when the throat area is worn, damaged or allowing small offcuts to fall into a wide opening. Its stated compatible models include the DW703, DW704, DW705, DW706, DW715 and DW716.

The insert is made from MDF and is designed to sit flush with the base. Carve Tech says the smaller blade opening can help reduce tear-out and keep small pieces from dropping through the gap.

Those are design goals, not a guarantee for every material or blade setup.

The insert can be customized for the blade size, so follow the fitting instructions and confirm the correct shape for your saw. Disconnect power and remove the blade or follow the safe procedure in the saw manual before working around the throat plate.

Choose it when the handle is sound but the cutting surface needs attention. It is not the right part for repairing a cracked DW705 handle.

What should you check before ordering DW705 parts?

Check the full model, type number and part-number reference before ordering a DeWalt DW705 replacement part. A handle that fits one DW705 type may not fit another, even when the model name looks the same.

Start with the nameplate on the saw. Compare the type with the product's stated range, then match the reference number where one is available.

For early models, look for 380452-00 or 3380452-00. For later models, look for 395674-02 or 396375-00.

Write those numbers down before you open any product page. It keeps the search focused and reduces the chance of picking a similar looking housing.

Next, check what the package includes. The early clamshell sets include both housing halves, but the trigger switch and mounting hardware are separate.

The later handle options also require careful attention to retained parts and the included screw or hardware. Do not assume every small component is in the box.

Look at the condition of the parts you plan to reuse. A housing will not fix a worn switch, damaged wiring or stripped hardware.

Before taking the old handle apart, photograph the wiring and note where each wire sits. Keep the original switch, screws and hardware in a labeled container until the replacement housing is installed and checked.

Lay the old and new housings side by side before you close the new shell. That step lets you compare mounting points and wire routing while the parts are still open.

After reassembly, check the grip and switch action before you return the saw to use. Stop and recheck if anything feels loose or misaligned.

If you need help securing workpieces while using the saw, read How To Use Dewalt Miter Saw Clamp?. If replacing several parts costs close to another saw, compare How Much Is A Dewalt Miter Saw? before deciding.

Are DeWalt DW705 replacement parts interchangeable?

Some parts are interchangeable across listed models and types, but DW705 parts are not universally interchangeable. Interchangeability depends on the exact compatibility list for each part.

The 380452-00 options cover listed DW705 Types 1-5, while the 395674-02 options cover later types and selected variants. That split is the clearest example of why the type number matters.

The model number alone is not enough. A DW705 Type 5 and a DW705 Type 7 can need different handle housings, so match the type number and part reference before ordering.

The same caution applies to regional variants. DW705S, DW705-AR, DW705-B2, DW705-B3 and DW705-BR models should be checked against the listed range for the part you choose.

Cross model coverage can be useful. Some early housings also list DW704, 3660 and 3680 types, which can help a workshop with several older saws.

That shared coverage does not make a part universal. It only means the housing fits those listed types when the exact match is confirmed.

The Carve Tech insert shows a different kind of compatibility. It lists the DW705 among several DeWalt models, but it serves the blade opening rather than the handle.

A handle housing and an insert are not interchangeable with each other. One repairs the grip, and the other addresses the cutting surface.

Package contents also limit interchangeability. A housing may fit the saw but still need the original switch and hardware to complete the repair.

Related model guides can help if you own more than one saw. For comparison with another brand, see the guide to best Kobalt replacement parts for miter saws.

Use those guides to compare how part numbers and model ranges change across saw families. Then return to the DW705 nameplate for the final decision.

What are the best DeWalt miter saw parts DW705 owners can buy?

Pick the palart 380452-00 for a listed DW705 Type 1-5 with a damaged handle. It includes both handle halves and is the clearest match for that early housing repair.

Choose the folosem 395674-02 396375-00 housing for a listed Type 6-8 or compatible DW705 variant. Its part references match the later handle design.

Choose the Carve Tech insert when the blade opening needs a cleaner, flush cutting surface. It does not repair a handle, but it can help where the throat area is worn.

For a Type 1-5 saw, the 380452-00 route is the starting point. Confirm that the nameplate type falls in that range before you order.

For a Type 6-8 saw, start with 395674-02 or 396375-00. Check the variant marking as well as the type number.

If the trigger switch or wiring is damaged, a housing alone may not be enough. Inspect those parts and plan to retain or replace them as needed.

The safest buying rule is simple: read the saw's type number first, then match the part number and package contents. That check matters more than choosing a handle that only says DW705 in its name.

Keep the old hardware and switch until the new part is fitted. That habit turns a rushed swap into a careful repair.

Our top 3 picks at a glance

1. 1
   Best for DW705 Types 1–5

   palart 380452-00 Miter Saw Handle Clamshell Set

   9.7/10 our score

   See it on Amazon
2. 2
   Best for verified part-number matching

   folosem 3380452-00 Miter Saw Handle Clamshell Set

   9.6/10 our score

   See it on Amazon
3. 3
   Best for DW705 and 3660 cross-compatibility

   FBULWSEC 380452-00 Miter Saw Parts for DeWalt

   9.4/10 our score

   See it on Amazon

Frequently asked questions

Which handle fits a DeWalt DW705?

The correct handle depends on the DW705 type. The palart 380452-00, folosem 3380452-00 and FBULWSEC 380452-00 options cover listed DW705 Types 1–5.

The folosem 395674-02 and FBULWSEC 395674-02 assemblies target listed Types 6–8 and related variants.

Check the nameplate before ordering.

Are DW705 handle halves sold with the trigger switch?

No. The 380452-00 handle options include the housing halves, but the on/off trigger switch and mounting or assembly hardware are not included.

The 395674-02 options also require careful checking of the included parts.

Keep the original switch and hardware if they are usable.

How do I identify my DeWalt DW705 type?

Read the model and type information on the saw's nameplate, then compare it with the compatibility range for the replacement handle. DW705 Types 1–5 use different part references from many Types 6–8 models.

Do not rely on the DW705 name alone because variants use different housings.

Can a zero-clearance insert fit a DW705?

The Carve Tech Zero Clearance Insert is specified for the DeWalt DW705, along with several related models. It sits flush with the base and can be customized for the blade size.

Confirm the insert shape and fit for your saw before installation, and disconnect power before working near the blade.