9 Best Makita 10-Inch Miter Saws (November 2026)

The best Makita 10-inch miter saws include the Makita LS1019L 10" Dual-Bevel Sliding Compound Miter for wide trim and sliding cuts, the DEWALT 20V MAX 7-1/4-Inch Miter Saw for cordless trim work, and the DEWALT 12-Inch Miter Saw for larger blade capacity.

On this page (6 sections)

1. Which Makita 10-inch miter saws suit different projects?
2. How we chose these Makita 10 miter saw picks
3. The best Makita 10-inch miter saws and alternatives
4. What should you compare before choosing a Makita 10-inch saw?
5. How does the LS1019L compare with other Makita saws?
6. Which Makita 10-inch miter saw should you choose?

The best Makita 10 miter saw for most trim and framing work is the LS1019L, a dual-bevel slider with 6-5/8 in of nested crown capacity. If you want a fixed-head Makita for common cuts, the LS1040 has a 10-inch blade and a 15-amp direct-drive motor.

The choices below include Makita saws, a compatible Makita blade option, and alternatives that show what you gain or give up with other blade sizes, bevel layouts and power types. Our score weighs specs, features and buyer feedback against what you're shopping for.

Our picks at a glance

1. 1
   Best for wide trim and sliding cuts

   Makita LS1019L 10" Dual-Bevel Sliding Compound Miter

   9.7/10 our score

   See it on Amazon
2. 2
   Best for cordless trim work

   DEWALT 20V MAX 7-1/4-Inch Miter Saw

   9.5/10 our score

   See it on Amazon
3. 3
   Best for larger blade capacity

   DEWALT 12-Inch Miter Saw

   9.3/10 our score

   See it on Amazon

4. 4

   SKIL 10" Dual Bevel Sliding Compound Miter

   Best for dual-bevel value
   Check it
5. 5

   Metabo HPT 10-Inch Compound Miter Saw

   Best for a light fixed-head saw
   Check it
6. 6

   Makita B-66977 10" 80T Carbide-Tipped Max Efficiency

   Best for fine wood cuts
   Check it
7. 7

   Genesis GMS1015LC 15-Amp 10-Inch Compound Miter Saw

   Best for basic compound cuts
   Check it
8. 8

   Makita LS1040 10" Compound Miter Saw

   Best for straightforward Makita cuts
   Check it
9. 9

   DEWALT 20V MAX XR 10 in. Double

   Best for cordless 10-inch cuts
   Check it

Which Makita 10-inch miter saws suit different projects?

The LS1019L is the strongest fit for wider stock and crown work, while the LS1040 suits routine cuts that do not need a sliding rail. The other picks help compare cordless operation, larger blade capacity and less complex saw designs.

How we chose these Makita 10 miter saw picks

We compared the listed cutting capacities, slide and bevel designs, power sources, portability details and included features. The roundup also includes alternatives and a 10-inch Makita blade because buyers often compare a saw and its cutting setup together.

These products are not all Makita saws. The DEWALT, SKIL, Metabo HPT and Genesis options provide reference points for buyers weighing a 10-inch Makita against cordless operation, dual bevels, a fixed head or a larger blade.

For another option, compare dual-bevel 7-1/4-inch saws.

The best Makita 10-inch miter saws and alternatives

The Makita LS1019L leads for buyers who need the most flexible 10-inch setup in this group. The remaining picks serve more specific needs, from simple compound cuts to cordless portability.

1

Makita LS1019L 10" Dual-Bevel Sliding Compound Miter: Best for wide trim and sliding cuts

9.7/10Our score

• 10-inch blade
• Dual-bevel sliding compound design
• 6-5/8 in nested crown capacity
• Single slide-glide operation

The LS1019L combines a 10-inch blade with a sliding, dual-bevel design. Makita gives it 6-5/8 in of nested crown capacity and a rail layout designed to operate close to a wall.

See it on Amazon

Pros

• Large nested crown capacity for a 10-inch saw
• Dual-bevel sliding design
• Compact rail layout

Cons

• Corded power limits placement to an outlet
• Sliding setup needs room for material support

The LS1019L is the clearest choice when a 10-inch blade and sliding capacity both matter. Makita gives it 6-5/8 in of nested crown capacity, which is the key reason it can suit larger trim work than a basic fixed-head 10-inch saw.

Its dual-bevel design lets you angle the blade to either side, and the single slide-glide rail setup is designed to reduce the saw's footprint. Makita says the rails allow operation flush against a wall, a useful detail when bench depth is limited.

The direct-drive gearbox and guard system is engineered for 5-1/4 in vertical cutting capacity. The saw also includes a laser and a 60-tooth blade, while its 57.9 lb weight in the feature details is relevant if you expect to move it between work areas.

Choose this model when you need a versatile corded saw for trim, cabinetry or general construction and will use its sliding range. If your cuts are mostly narrow stock, compare the fixed-head LS1040 before paying for a slide mechanism.

2

DEWALT 20V MAX 7-1/4-Inch Miter Saw: Best for cordless trim work

9.5/10Our score

• 7-1/4-inch sliding miter saw
• 20V MAX battery platform
• 30 lb listed weight
• Integrated cut-line indication

This compact cordless saw is a useful alternative when portability matters more than staying with Makita. Its stated capacity includes 3-5/8 in nested crown and 3-1/2 in base vertically.

See it on Amazon

Pros

• Cordless 20V MAX platform
• Compact 30 lb design
• Adjustment-free cut-line indication

Cons

• Smaller blade than the 10-inch choices
• Tool-only version requires a compatible battery

The DEWALT DCS361B is a portable cordless alternative with a smaller 7-1/4-inch blade. It makes sense when battery power and a 30 lb design matter more than matching the 10-inch blade size in the search.

Its stated capacity includes 3-5/8 in nested crown and 3-1/2 in base vertically. An integrated cut-line system indicates the cut position, while the miter plate has 11 positive stops.

This model is tool only, so factor in a compatible 20V MAX battery and charger if you do not already have them. It is not a Makita saw, but it gives a useful point of comparison for mobile trim work where a smaller blade is enough.

Choose it for portability and cordless use. For a cordless 10-inch alternative, the roundup also includes DEWALT's 20V MAX XR fixed miter saw.

3

DEWALT 12-Inch Miter Saw: Best for larger blade capacity

9.3/10Our score

• 12-inch blade
• 15-amp corded motor
• Single-bevel compound design
• 14 miter detent stops

This 12-inch saw is an alternative for buyers whose work calls for a larger blade. Its stated crosscut capacity is 2 x 8 lumber at 90 degrees and 2 x 6 lumber at 45 degrees.

See it on Amazon

Pros

• Larger blade than the 10-inch picks
• 14 positive miter stops
• Tall sliding fence

Cons

• Single-bevel design
• Larger blade may not suit buyers set on 10-inch accessories

This DEWALT moves up to a 12-inch blade, which may suit buyers whose cut needs push beyond a 10-inch saw. It is a single-bevel compound model with a 15-amp motor and 14 positive miter stops.

The stated crosscut capacity is 2 x 8 lumber at 90 degrees and 2 x 6 lumber at 45 degrees. Its tall sliding fence supports 5-1/2 in of base vertically, while the bevel range is 0 to 48 degrees left and 0 to 3 degrees right.

That larger blade is a trade-off if you have already chosen 10-inch blades or want to keep the saw compact. Compare the cut capacity you need with the footprint and blade format before switching sizes.

4

SKIL 10" Dual Bevel Sliding Compound Miter: Best for dual-bevel value

9.2/10Our score

• 10-inch sliding saw
• 15-amp corded motor
• Dual bevel
• LED shadow line

The SKIL MS6305-00 offers a 10-inch dual-bevel sliding setup with a 15-amp motor. It lists a 2 x 12 crosscut capacity at 90 degrees and 2 x 8 at 45 degrees.

See it on Amazon

Pros

• Dual bevel and slide function
• LED shadow line
• Common miter stops

Cons

• Corded power
• Not a Makita model

The SKIL MS6305-00 is a 10-inch dual-bevel slider for buyers who want those features without staying with Makita. Its 15-amp motor, LED shadow line and 50-degree miter range left and right cover a broad range of common shop cuts.

SKIL states a 2 x 12 crosscut capacity at 90 degrees and 2 x 8 at 45 degrees. The saw has positive stops at frequently used angles, plus a sliding fence that supports nested crown molding up to 6-1/4 in.

The LED shadow line helps show the blade's cut position. Choose this model if you want a 10-inch sliding saw with dual bevels and do not require Makita branding or a specific Makita battery platform.

5

Metabo HPT 10-Inch Compound Miter Saw: Best for a light fixed-head saw

9.1/10Our score

• 10-inch blade
• 15-amp corded motor
• Single bevel
• 24.2 lb listed weight

This 10-inch alternative focuses on a light, fixed-head setup. It has a 0–52 degree miter range left and right, plus a 0–45 degree bevel range to the left.

See it on Amazon

Pros

• Light listed weight
• Miter range to 52 degrees both ways
• Five-year tool-body warranty

Cons

• Single bevel
• No sliding function

The Metabo HPT C10FCG2 is a light fixed-head 10-inch saw for buyers who do not need slide capacity. At 24.2 lb, it is the lightest saw in this roundup's product data.

It has a 15-amp corded motor, a single bevel to the left and a miter range from 0 to 52 degrees in either direction. The vice clamp secures the workpiece, and the large table supports material during cutting.

Because it does not slide, check whether its capacity suits your widest boards before choosing it. Its five-year tool-body warranty is a stated Metabo HPT term, so review the warranty conditions for details.

6

Makita B-66977 10" 80T Carbide-Tipped Max Efficiency: Best for fine wood cuts

9.0/10Our score

• 10-inch, 80-tooth blade
• Carbide-tipped teeth
• Thin kerf design
• Designed for wood

This Makita blade is an accessory for compatible 10-inch saws, not a saw itself. Its 80 teeth and thin-kerf design target smoother cuts in wood.

See it on Amazon

Pros

• Makita 10-inch accessory
• 80 teeth for finer cut work
• Thin kerf

Cons

• Blade only, not a saw
• Confirm arbor and saw compatibility

The Makita B-66977 is a 10-inch blade accessory, not a miter saw. Its 80 carbide-tipped teeth and thin-kerf design are intended for smoother wood cuts with less material loss.

Makita says the blade's tooth design helps reduce tool load during cutting. Confirm the arbor and saw compatibility before installing it, and match the blade to the material and cut finish you need.

This pick is relevant if you already own a compatible 10-inch saw and want a finer-tooth Makita blade. It does not add sliding capacity, bevel range or motor power to a saw.

7

Genesis GMS1015LC 15-Amp 10-Inch Compound Miter Saw: Best for basic compound cuts

8.7/10Our score

• 10-inch blade
• 15-amp motor
• Single left bevel to 45 degrees
• Laser guide

Genesis provides a basic 10-inch compound saw with a laser guide and nine positive miter stops. It suits buyers comparing a simpler setup alongside Makita models.

See it on Amazon

Pros

• Laser guide
• Nine positive miter stops
• Includes blade and hold-down clamp

Cons

• Single bevel
• No sliding capacity

The Genesis GMS1015LC is a basic 10-inch compound saw with a laser guide and nine positive miter stops. It can bevel up to 45 degrees left and make miter cuts up to 45 degrees in either direction.

The included package has a 60-tooth carbide blade, a hold-down clamp, a dust bag and extension wings. Its fixed-head design means it does not provide the wider crosscut range of a slider.

Consider it when your work centers on common compound cuts and you want a simple setup to compare with Makita's LS1040. Check that its stated cut capacity fits your material before choosing it for molding or wide boards.

8

Makita LS1040 10" Compound Miter Saw: Best for straightforward Makita cuts

8.5/10Our score

• 10-inch blade
• 15-amp direct-drive motor
• Single bevel to 45 degrees left
• Nine positive miter stops

The LS1040 is Makita's simpler fixed-head option in this group. Its direct-drive motor and nine miter stops suit common crosscuts, bevels and angled trim cuts.

See it on Amazon

Pros

• Makita 10-inch saw
• Direct-drive motor
• Miter range reaches 52 degrees right

Cons

• No sliding function
• Bevels left only

The Makita LS1040 is the straightforward fixed-head Makita choice in this roundup. Its 15-amp direct-drive motor runs at 4,600 rpm, and its dual-post pivot arm supports compound cuts.

The saw bevels up to 45 degrees left and miter cuts range from 0 to 45 degrees left and 0 to 52 degrees right. Nine positive miter stops cover common angles, including 15, 22.5, 30 and 45 degrees.

At 27 lb, it is also a more portable Makita option than the LS1019L. Choose it if you want a corded 10-inch Makita for everyday crosscuts and angled cuts, and do not need a sliding head or right-side bevel.

9

DEWALT 20V MAX XR 10 in. Double: Best for cordless 10-inch cuts

8.3/10Our score

• 10-inch blade
• 20V MAX and FLEXVOLT compatibility
• Double bevel
• 34 lb tool-only weight

This cordless 10-inch alternative is double bevel and weighs 34 lb without a battery. It lists a 6 in horizontal cut capacity and compatibility with DEWALT 20V MAX and FLEXVOLT batteries.

See it on Amazon

Pros

• 10-inch cordless format
• Double bevel
• Dust collection claim of up to 97%

Cons

• Battery and charger sold separately
• Not a Makita model

The DEWALT DCS714B is a cordless 10-inch double-bevel alternative. It works with DEWALT 20V MAX and FLEXVOLT batteries, which are sold separately, and weighs 34 lb without a battery.

Its stated capacity reaches 6 in horizontally, 5-1/4 in for vertical baseboard and 5-1/4 in for nested crown. The fixed-head design keeps it distinct from the sliding LS1019L, even though both use a 10-inch blade.

DEWALT says its dust collection captures up to 97% of dust during use. Treat that as a manufacturer claim and use suitable dust protection for your workspace.

Choose it if cordless operation is important and you need a 10-inch blade with double bevels. It is not a Makita model, so it will not fit a Makita battery setup.

What should you compare before choosing a Makita 10-inch saw?

Compare slide capacity, bevel direction and power source first, because these affect which cuts the saw can make and where you can use it. Blade diameter alone does not tell you whether a saw fits your projects.

Is a Makita 10-inch sliding miter saw worth it?

A Makita 10 in sliding miter saw is worth considering if you regularly crosscut wider boards or cut taller molding. The LS1019L combines sliding movement with dual bevels and a 6-5/8 in nested crown capacity.

A fixed-head model like the LS1040 has fewer moving parts and is easier to move at 27 lb. It is a better match when your projects use narrower stock and do not require the extra sliding range.

Do you need dual bevels?

Dual bevels let you tilt the blade to either side, which can reduce the need to flip a workpiece for opposing bevel cuts. The LS1019L is dual bevel; the LS1040 bevels left only.

If you rarely make bevel cuts, a single-bevel saw may meet your needs. For frequent trim work with repeated left and right bevels, dual bevel can make setup more direct.

Should you choose corded or cordless power?

Corded power suits a fixed shop or jobsite with dependable outlet access. The Makita LS1019L and LS1040 are corded, while the cordless alternatives in this roundup need compatible batteries.

Battery systems matter when you already own tools from a brand. The DEWALT cordless picks use DEWALT 20V MAX batteries, and the DCS714B also supports FLEXVOLT batteries.

Is a 10-inch blade enough for your cuts?

A 10-inch blade can cover many trim, flooring and general carpentry tasks, but cut capacity depends on the saw's design. A sliding 10-inch model can handle wider material than a fixed-head model with the same blade diameter.

If your projects call for larger cuts, compare the DEWALT 12-inch saw's stated capacity and review our Best Makita 12-Inch Miter Saws guide. For a broader comparison of blade sizes and use cases, see What Is the Best 10 Inch Miter Saw?.

Which blade should you use for trim?

Choose a blade with tooth design suited to your material and desired finish, then verify that it fits the saw. The Makita B-66977 has 80 teeth and a thin kerf for wood, while the LS1019L includes a 60-tooth blade.

A blade change cannot increase a saw's cut capacity or replace a needed sliding function. Keep the blade guard in place and follow the saw and blade manufacturers' instructions during changes.

How does the LS1019L compare with other Makita saws?

The LS1019L adds sliding capacity and dual bevels, while the LS1040 keeps a fixed head and single left bevel. If you want a wider look at Makita's options, see our guide to the best Makita compound miter saw picks.

The Makita LS1019L miter saw review focuses on that model's capacity and layout. Our best Makita sliding miter saws guide compares sliding options across the brand.

Which Makita 10-inch miter saw should you choose?

Choose the LS1019L if your work needs sliding capacity, dual bevels or larger nested crown cuts. Choose the LS1040 if you want a lighter fixed-head Makita for common crosscuts and left bevels.

If portability matters more than Makita branding, compare the cordless DEWALT models and confirm that their battery platform and cut capacity suit your work. For another brand's 10-inch slider options, read Does Dewalt Make A 10 Inch Sliding Miter Saw?.

Our top 3 picks at a glance

1. 1
   Best for wide trim and sliding cuts

   Makita LS1019L 10" Dual-Bevel Sliding Compound Miter

   9.7/10 our score

   See it on Amazon
2. 2
   Best for cordless trim work

   DEWALT 20V MAX 7-1/4-Inch Miter Saw

   9.5/10 our score

   See it on Amazon
3. 3
   Best for larger blade capacity

   DEWALT 12-Inch Miter Saw

   9.3/10 our score

   See it on Amazon

Frequently asked questions

Is the Makita LS1019L a 10-inch miter saw?

Yes. The Makita LS1019L has a 10-inch blade and a dual-bevel sliding compound design.

Makita gives it 6-5/8 in of nested crown capacity, so it can suit trim work that needs more vertical capacity than a basic fixed-head saw.

Should you choose a sliding or non-sliding Makita 10-inch saw?

Choose a sliding saw when you need to crosscut wider boards, and a non-sliding saw when your work is mostly narrower stock and you want a simpler fixed-head layout.

The LS1019L slides; the LS1040 is a non-sliding compound saw.

Can a 10-inch miter saw cut crown molding?

Yes, if the saw's stated crown capacity fits your molding and setup. The LS1019L is rated for 6-5/8 in nested crown, while other models can have different limits.

Check both the molding position and fence clearance before making a cut.

Is a cordless 10-inch saw available in this roundup?

Yes. The DEWALT 20V MAX XR 10-inch double-bevel saw is a cordless option, though it is not a Makita model.

The DEWALT 7-1/4-inch saw is another portable choice if a smaller blade meets your cut needs.

Does a 10-inch blade fit every 10-inch miter saw?

No. Check the saw's arbor size, blade type and manufacturer guidance before replacing a blade.

The Makita B-66977 is a 10-inch, 80-tooth blade, but compatibility still depends on the saw.