8 Best Five-Inch Orbital Sander Interface Pads (November 2026)
The best 5 inch orbital sander interface pads include the Ysglory 10 Pack 5 Inch 8 Holes for bulk value, the SIJDIEE 6 Pack 5 Inch 8 Hole for wet and dry use, and the WORKPRO 5 Inch Orbital Sander Pads (best complete kit).
On this page (10 sections)
- Best 5 inch orbital sander interface pads for curves, finishing and dust control
- Best 5 inch orbital sander interface pad: side by side comparison
- How we compared these 5 inch orbital sander interface pads
- What hole pattern does your 5 inch orbital sander use?
- How thick should an orbital sander foam pad 5 inch be?
- Should you buy pads only or a kit with discs?
- Can you use an interface pad for wet sanding or polishing?
- How do you choose the best orbital sander interface pad?
- How do you use and care for a 5 inch interface pad?
- Verdict: which 5 inch orbital sander interface pad should you buy?
The best 5 inch orbital sander interface pad for most users is the Ysglory 10 Pack 5 Inch 8 Holes, because you get 10 soft pads, 13 mm thickness and an 8-hole pattern for standard discs.
An interface pad sits between the backing pad and the disc. It adds cushion so the disc can follow curves instead of digging in at one edge.
Start with your sander's hole pattern. Most 5 inch random orbital sanders use 8 holes, while 3M Clean Sanding machines use 44 holes.
Buying the wrong pattern blocks airflow and loads the disc faster. If you still need a machine, compare five-inch corded orbital sanders.
If you are unsure which sander type you own, our guide to different types of sanders explains random orbital, pad and belt designs.
On flat work, foam softens the contact patch and spreads pressure. That can help with polishing and light finishing where a hard backing pad alone may mark the surface.
If you want discs included, WORKPRO and Tshya cover that need. If you use mesh discs, a pad saver may work better than foam.
Our picks at a glance
- 4
Best wide grit rangeCheck it - 5
Check itS&F STEAD & FAST Orbital Sander Foam Pad
Best for fine finishing - 6
Best for mesh discsCheck it - 7
Check it3M Clean Sanding Soft Interface Disc Pad
Best for 3M Clean Sanding - 8
Check itS&F STEAD & FAST Orbital Sander Foam Pad
Best 4-pack finishing kit
Best 5 inch orbital sander interface pads for curves, finishing and dust control
The picks below cover pad-only value packs, kits with discs, fine finishing sets, a thin pad saver and a 44-hole 3M pad. Choose by hole pattern first, then by how much cushion you need.
Our broader best orbital sander accessories guide covers discs, mesh abrasives and other add-ons. This post stays focused on the interface layer itself.
Ysglory 10 Pack 5 Inch 8 Holes: Best for bulk value
- 10 pack of 5 inch pads
- 8 holes, about 10 mm each
- 13 mm foam thickness
- Hook face for discs, loop face for backing pad
- Soft durable sponge
Ten soft foam pads give you spares for curved work and polishing without buying small packs often. The 8-hole pattern keeps dust moving through standard 5 inch discs.
Pros
- 10 pads in one pack
- Soft foam follows contours
- 8-hole pattern for dust extraction
- Hook and loop on both faces
Cons
- Not for PSA self adhesive discs
- Pads only, no sanding discs included
Ysglory suits anyone who sands often and wants spares on hand for repeated jobs. You get 10 pads at 5 inches with 8 holes, each about 13 mm thick and about 125 mm across.
That thickness gives real cushion for curves without turning flat sanding vague or hard to control.
One face is hook to hold the disc. The other face is loop to grip the backing pad.
That two-face design is standard, but a 10 pack means a worn, loaded or torn pad is easy to replace without stopping for a new order.
The foam is soft durable sponge, so it can follow contours and get closer to edges. Ysglory says it helps reduce vibration and protect the backing pad from damage.
The hole diameter is about 0.39 inch, close to 10 mm, and the 8 hole layout helps keep dust from clogging the machine.
The trade-off is that these pads are for hook and loop discs only. They are not suitable for PSA self adhesive discs.
No discs are included, so pair them with discs you already own. Choose this over smaller packs if you work on wood, bowls or polishing tasks often.
SIJDIEE 6 Pack 5 Inch 8 Hole: Best for wet and dry use
- 6 pack of 5 inch pads
- 8 holes
- 13 mm thick foam
- Waterproof adhesive between foam and hook and loop
- Black hook side and white loop side
Six foam pads with waterproof adhesive suit wet and dry polishing on curves. The soft sponge spreads pressure and helps protect the backing pad.
Pros
- Waterproof adhesive bond
- 6 pack balance of price and spares
- Soft foam for contours
- 8-hole dust pattern
Cons
- No discs included
- Fewer spares than the 10 pack
SIJDIEE suits wet and dry polishing on curved and irregular surfaces such as wood, automotive surfaces and furniture. You get 6 pads, 5 inches across and 13 mm thick, with an 8-hole pattern that helps prevent dust clogging and extends the life of the backing pad and discs.
The black side is hook for the disc and the white side is loop for the pad. SIJDIEE says a waterproof adhesive joins foam and hook and loop, so the layers should not come off in wet use.
That bond matters when you move between dry sanding and wet polishing in the same session.
Soft sponge spreads pressure across the surface. That can help reduce burn-through on delicate areas and give a smoother glide over curves.
The maker describes extra cushioning that reduces vibration and evens out pressure for a smoother sanding effect.
SIJDIEE lists uses from ship paint and plastic to metal, glass and stainless steel. As with any pad, match the disc grit to the material and finish you want.
Choose this over Ysglory if wet sanding matters to you. Choose Ysglory if you want more pads per pack.
WORKPRO 5 Inch Orbital Sander Pads: Best complete kit
- 4 foam pads plus 8 discs
- Grits 80, 120, 240 and 320
- 5 inch, 8-hole design
- 12 mm thick pads
- 3-layer pad design
Four interface pads plus eight discs in four grits cover roughing through finishing. That makes it useful when you need pads and discs together.
Pros
- Pads and discs together
- Four grit range
- 3-layer cushion design
- 8-hole dust extraction
Cons
- Fewer pads than pad-only packs
- Disc grit range stops at 320
WORKPRO suits buyers who want pads and discs in one box. You get 4 foam pads and 8 discs, all 5 inch with 8 holes.
The discs cover 80, 120, 240 and 320 grit. That lets you start rough and finish finer without a separate disc purchase.
Each pad has a 3-layer design of hook surface, high density foam and loop backing. The foam conforms to curves and absorbs shock.
The 8 hole pattern supports dust extraction, and the 5 inch size fits most standard hook and loop orbital sanders. The green discs use a polyester film backing that resists tearing.
Pads are 12 mm thick, a little thinner than the 13 mm packs above. That can feel more controlled on flat work while still cushioning curves.
The maker positions the kit for woodworking, automotive polishing, drywall sanding and home improvement on flat and curved surfaces. Fewer pads than pad-only packs is the trade-off.
If you mainly need foam pads, Ysglory gives more spares. If you need a ready kit, WORKPRO is the simpler buy.
Tshya 5 Pcs 5 inch 8 Holes: Best wide grit range
- 5 pads plus 30 discs
- Disc grits 100, 150, 180, 240, 320 and 400
- 5 inch, 8 holes
- Soft density sponge
- Aluminum oxide discs
Five pads and 30 discs across six grits suit buyers who want one box for many jobs. The soft foam helps on uneven surfaces and wooden bowls.
Pros
- 30 discs included
- Grit range to 400
- 5 spare pads
- Soft density foam
Cons
- Large kit if you only need pads
- Foam thickness is less clearly stated
Tshya suits buyers who want a wide grit range without shopping for discs separately. You get 5 pads and 30 discs, all 5 inch with 8 holes.
The discs cover 100, 150, 180, 240, 320 and 400 grit, with 5 discs per grit. That gives a gradual step through each stage.
The pads use soft density sponge that helps maintain contact on contours and sand closer to edges. That suits uneven surfaces, wooden bowls and general home work.
The stated foam construction is about 0.5 inch, in the same cushion range as the other foam pads here. The aluminum oxide discs suit wood, metal and crafting.
A 400 grit disc gives a finer finish than the WORKPRO kit, while 100 grit starts closer to shaping work. The 8 hole design helps prevent dust clogging and prolong tool life.
The trade-off is kit size. If you already own discs, much of this box may sit unused.
Tshya also lists use with angle grinders and die grinders in the specs. Most readers here will use these with a 5 inch orbital sander, so check disc fit first.
S&F STEAD & FAST Orbital Sander Foam Pad: Best for fine finishing
- 2 interface pads
- 2 silicon carbide discs, 1000 and 2000 grit
- 5 inch, 8-hole
- 0.5 inch thick foam
- High temperature resistant adhesive
Two thick foam pads with 1000 and 2000 grit silicon carbide discs suit fine finishing and wet sanding. The bond between foam and hook and loop resists heat and separation.
Pros
- Very fine grit discs included
- Thick 0.5 inch foam
- Heat resistant adhesive
- Wet sanding use
Cons
- Only 2 pads
- Fine grits only, no coarse discs
S&F STEAD & FAST suits fine finishing rather than rough removal on cars, boats and furniture. You get 2 interface pads and 2 silicon carbide discs in 1000 and 2000 grit.
Those grits are for smoothing and wet sanding, not heavy stock removal or scratch repair. The pads are 5 inch, 8-hole and 0.5 inch thick.
That thick foam follows contours on curved surfaces. It reduces vibration for a swirl-free finish, with enough firmness for efficient removal on curves and enough flex to absorb shock.
A high temperature resistant adhesive joins foam and hook and loop. That bond helps resist separation at higher speeds and in wet sanding.
Upgraded hook and loop on both sides holds the disc firmly and attaches securely to the sander. The trade-off is a small pack and a narrow grit range.
You will still need coarse discs for shaping or scratch removal. Watch for a second S&F STEAD & FAST entry later with 4 pads and 4 discs, and check pack size before you order.
Serious Grit 5-Inch: Best for mesh discs
- 3 pack pad savers
- 5 inch, 125 mm
- Thin low profile design
- Sacrificial layer for backing pads
- Improves mesh disc grip
These thin pad savers protect an OEM backing pad and help mesh discs grip. They add little cushion, so they solve a different problem from foam pads.
Pros
- Protects backing pad
- Helps mesh disc grip
- Thin profile
- 3 pack
Cons
- Very little cushioning
- Not a foam interface pad
Serious Grit suits mesh and net disc users more than foam-pad users who want contouring. These are thin pad savers, 5 inches across, sold in a 3 pack.
They sit between disc and backing pad as a sacrificial layer.
The low profile design adds almost no cushion. Serious Grit says it does not affect cut or dust extraction.
That is the point: protection, not contouring. The stated thickness is about 0.1 cm, far thinner than 12 to 13 mm foam pads in this roundup.
Pad savers can improve grip with mesh discs that struggle to stay attached. They also absorb wear from frequent disc changes and heat from long sessions.
That can extend the service life of an expensive OEM backing pad, which is the main reason to choose this product.
This is a different tool from a foam interface pad. If your goal is curved sanding, choose foam.
If your goal is saving an expensive backing pad, choose a saver. Serious Grit says the size fits major 5 inch random orbital brands.
Still, match the hook and loop pattern to your sander before use, and inspect the saver when grip weakens.
3M Clean Sanding Soft Interface Disc Pad: Best for 3M Clean Sanding
- 5 inch by 0.5 inch
- 44 holes
- Soft density foam
- 3M Clean Sanding hole pattern
- Hookit attachment
One soft 44-hole pad made for 3M Clean Sanding systems. It gives strong dust extraction when your sander and discs match that pattern.
Pros
- 44-hole dust pattern
- Soft foam for contours
- Made for Clean Sanding airflow
- Single pad precision fit
Cons
- Single pad only
- Hole pattern must match your sander
3M suits a specific setup: a 5 inch sander and discs built for 3M Clean Sanding. This pad is 5 inches by 0.5 inch thick with 44 holes.
That hole pattern must match both sander and discs. It is the main reason to buy this pad.
Soft density foam gives cushion for coated and non-woven discs. It helps prevent gouging and marring and responds to contours and edges.
The foam is 1/2 inch soft density, giving more conformability than a medium density pad. The 44-hole pattern pulls dust through the pad and away from the surface.
That helps reduce loading and extend disc life compared with 5- or 6-hole products in its Clean Sanding system. Uniquely designed holes and channels move dust away from the sanding surface.
Hookit attachment makes disc changes faster in multi-step work. That matters when you move through grits on auto or wood jobs.
The trade-off is fit. This is a single pad for a specific hole pattern.
Standard 8-hole sanders should not use it unless the pattern matches. A vacuum sander with a Clean Sanding filter bag is part of the intended setup.
S&F STEAD & FAST Orbital Sander Foam Pad: Best 4-pack finishing kit
- 4 interface pads
- 4 silicon carbide discs, 1000 and 2000 grit
- 5 inch, 8-hole
- 0.5 inch thick foam
- Waterproof adhesive
Four foam pads and four fine silicon carbide discs suit finishing work on furniture, cars and boats. The 8-hole pattern fits most standard 5 inch sanders.
Pros
- 4 pads for spares
- Fine grit discs included
- Waterproof adhesive
- Standard 8-hole pattern
Cons
- Fine grits only
- No coarse sanding discs
This 4-pack version of S&F STEAD & FAST suits finishing work where you want extra pads on hand. You get 4 interface pads and 4 silicon carbide discs in 1000 and 2000 grit.
The pads are 5 inch, 8-hole and 0.5 inch thick.
Soft density foam absorbs vibration and follows rounded profiles. S&F STEAD & FAST says that helps avoid flat spots on curved edges.
The cushion also helps you get closer to edges with less risk of burn-through, swirl marks or surface scratches on sensitive work.
A reinforced hook and loop grip keeps discs secure at speed. Waterproof, heat resistant adhesive joins the foam and backing to resist peeling.
The maker describes the bond as staying glued together under heavy friction and heat, which is useful for wet sanding and dry finishing alike.
The standard 8-hole pattern fits most major orbital sanders in the description. That makes it easier to pair with discs you already own.
The trade-off is the same as the 2-pad version: fine grits only. Buy coarse and medium discs separately for prep work, and note the listed compatible device in the specs differs from its sibling, so confirm fit with your sander.
Best 5 inch orbital sander interface pad: side by side comparison
| Product | Best for | Diameter | Thickness | Hole pattern | Our score |
|---|---|---|---|---|---|
| Ysglory 10 Pack 5 Inch 8 Holes | bulk value | 5 inches | 13 mm | 8 holes | 9.7 |
| SIJDIEE 6 Pack 5 Inch 8 Hole | wet and dry use | 5 inches | 13 mm | 8 holes | 9.6 |
| WORKPRO 5 Inch Orbital Sander Pads | complete kit | 5 inches | 12 mm | 8 holes | 9.5 |
| Tshya 5 Pcs 5 inch 8 Holes | wide grit range | 5 inches | 0.5 inch foam | 8 holes | 9.3 |
| S&F STEAD & FAST Orbital Sander Foam Pad | fine finishing | 5 inches | 0.5 inches | 8 holes | 9.0 |
| Serious Grit 5-Inch | mesh discs | 5 inches | 0.1 cm | Hook and loop saver | 8.8 |
| 3M Clean Sanding Soft Interface Disc Pad | 3M Clean Sanding | 5 inches | 0.5 inches | 44 holes | 8.4 |
| S&F STEAD & FAST Orbital Sander Foam Pad | 4-pack finishing kit | 5 inches | 0.5 inches | 8 holes | 8.2 |
For a quick read, Ysglory leads on pad count and value. SIJDIEE leads for wet and dry use.
WORKPRO leads for a balanced kit. Tshya leads for grit range.
S&F STEAD & FAST leads for fine finishing. Serious Grit leads for mesh disc protection.
3M leads for 44-hole Clean Sanding setups.
The comparison also shows a clear split by purpose. Foam pads add cushion for curves, while a pad saver adds protection with almost no cushion.
Kits add discs for convenience, while pad-only packs give more spares for users who already own discs.
Thickness is another split. Most foam options sit at 12 mm, 13 mm or 0.5 inch, while the Serious Grit saver is about 0.1 cm.
That gap explains why one group follows contours and the other keeps a flat, direct cut.
How we compared these 5 inch orbital sander interface pads
We compared hole pattern, diameter, foam thickness, pack size, included discs, adhesive type and stated uses. We checked specs against the needs of a 5 inch random orbital sander first.
We gave more weight to fit and dust extraction because a pad that blocks airflow fails at its main job. We also weighed cushion thickness for curved work and grip for wet use.
Our score weighs specs, features and buyer feedback against what you're shopping for. Products with discs included scored well for beginners, while pad-only packs scored well for experienced users who already own discs.
We did not invent specs that were not in the data. Where thickness or fit details were limited, we treated that as a buying check for you.
What we left out
We left out products that did not state a clear 5 inch diameter or a usable hole pattern. That keeps the choice focused on pads that can actually fit a standard 5 inch random orbital sander.
We also separated pad savers from foam pads in scoring. A saver can be excellent for mesh discs and still be the wrong choice for curved polishing, so the verdict reflects that trade-off.
What hole pattern does your 5 inch orbital sander use?
The answer is 8 holes for most standard 5 inch sanders and 44 holes for 3M Clean Sanding systems. Check your backing pad before you order.
8-hole pads
8-hole pads match the most common 5 inch discs. Ysglory, SIJDIEE, WORKPRO, Tshya and both S&F STEAD & FAST packs use this pattern.
Dust still needs clear holes in both pad and disc.
44-hole pads
44-hole pads match 3M Clean Sanding sanders and discs. The 3M pad here has many more holes for stronger dust extraction.
Do not force it onto an 8-hole sander.
Mixed patterns
Some sanders use different patterns by brand. Count the holes on your backing pad and compare them with the disc.
A simple count saves a wasted order.
How thick should an orbital sander foam pad 5 inch be?
Most foam pads here are 12 mm, 13 mm or 0.5 inch thick. Thicker foam follows curves better but can feel less direct on flat panels.
Thinner cushion for flat work
Thin pads and pad savers keep the disc closer to the backing pad. Serious Grit's saver is the extreme case at about 0.1 cm.
That suits flat sanding and mesh discs.
Thicker cushion for curves
0.5 inch foam, about 12 to 13 mm, suits bowls, rounded furniture and auto curves. Ysglory and SIJDIEE sit in this range.
So do both S&F STEAD & FAST packs.
Pad savers are not foam pads
A pad saver protects the backing pad and improves mesh grip. It does not give the contouring cushion of foam.
If you search for a best 5 inch orbital sander pad saver, that is a separate buying decision.
How thickness affects edges
Thicker foam can help a disc ride over a rounded edge instead of digging in. The same cushion can also round a sharp edge faster if you press hard, so light pressure works better with soft pads.
Should you buy pads only or a kit with discs?
Pads only is better if you already own discs in the grits you use. Kits are better if you need discs now or want to try a grit range.
Pads only
Ysglory's 10 pack and SIJDIEE's 6 pack give you many pads for the price of one kit. That suits frequent sanders who burn through pads or switch grits often.
Kits with discs
WORKPRO gives 4 pads and 8 discs across 4 grits. Tshya gives 5 pads and 30 discs across 6 grits.
S&F STEAD & FAST kits focus on 1000 and 2000 grit finishing.
Replacement pads
If your backing pad itself is worn, foam pads will not fix it. Read our best 5 inch orbital sander replacement pad guide before ordering an interface pad for a damaged base.
Can you use an interface pad for wet sanding or polishing?
Yes, some pads are built for wet use with waterproof adhesive. SIJDIEE and S&F STEAD & FAST describe waterproof bonds between foam and hook and loop.
Wet sanding needs the right disc
Silicon carbide discs in the S&F STEAD & FAST kits suit wet finishing. Always pair a wet-use pad with a disc made for wet sanding.
Dry polishing still needs dust control
Foam pads help on polishing and buffing when you use the right disc. Keep the holes clear so dust does not load the surface.
Heat can weaken cheap bonds
Long sessions and high speed can heat the pad. Heat resistant adhesive in the S&F STEAD & FAST pads helps resist separation in that use.
How do you choose the best orbital sander interface pad?
Start with hole pattern, then decide if you need foam cushion or a thin saver. Then choose pack size and whether discs are included.
Match the pattern first
Count holes on your sander and discs. Buy 8-hole pads for standard setups and 44-hole pads for 3M Clean Sanding setups.
Pick cushion by the surface
Choose thick foam for curves, bowls and rounded edges. Choose a thin saver for flat work, mesh discs and backing pad protection.
Check discs and grits
If you need discs, compare grit ranges. WORKPRO covers 80 to 320, Tshya covers 100 to 400, and S&F STEAD & FAST covers 1000 to 2000.
For a general view of interface pads beyond 5 inch sizes, see our best orbital sander interface pad guide. It helps you compare foam types and backing fit.
How do you use and care for a 5 inch interface pad?
Press the pad evenly onto the backing pad, then press the disc onto the hook side. Keep holes aligned so dust can pass through.
Clean hook surfaces with a brush or by tapping the pad. Dust buildup weakens grip and can let a disc shift at speed.
Let wet pads dry before storage. Store pads flat so the foam does not crease.
Replace pads when the hook side stops gripping or the foam tears.
Storage and rotation
Rotate pads across jobs so one pad does not wear out faster than the rest. A 10 pack or 6 pack makes that rotation easier, while a single pad leaves no spare if it loads up mid job.
Verdict: which 5 inch orbital sander interface pad should you buy?
Pick Ysglory if you want the best value pack of foam pads. Pick SIJDIEE for wet and dry use.
Pick WORKPRO for pads plus discs.
Pick Tshya for the widest grit range in one box.
Pick S&F STEAD & FAST for fine finishing with 1000 and 2000 grit discs. Pick Serious Grit for mesh discs and backing pad protection.
Pick 3M only if your sander uses the 44-hole Clean Sanding pattern.
For most standard 8-hole sanders, the Ysglory 10 pack is the safest first buy. It gives cushion, dust extraction and spares in one simple purchase.
Our top 3 picks at a glance
Frequently asked questions
What is a 5 inch orbital sander interface pad?
A 5 inch orbital sander interface pad is a foam layer that sits between the backing pad and the sanding disc. It adds cushion so the disc can follow curves and contours.
It also helps spread pressure and reduce vibration.
Do I need an 8-hole or 44-hole interface pad?
Match the hole pattern to your sander and discs. Standard 5 inch sanders often use 8 holes, while 3M Clean Sanding systems use 44 holes.
A mismatch can block dust extraction and reduce disc life.
Can an interface pad be used for wet sanding?
Some pads suit wet sanding when the foam and hook and loop bond is waterproof. SIJDIEE and S&F STEAD & FAST describe waterproof adhesive for wet use.
Check the disc type before using water.
How thick should a foam interface pad be?
Most foam pads here are about 12 to 13 mm or 0.5 inch thick. Thicker pads follow curves more but can feel less precise on flat work.
Thin pad savers add protection with almost no cushion.
About this guide: Our look at 5 inch orbital sander interface pads draws on maker specs, materials and what owners report. See how we research.



