9 Best Delta 10-Inch Compound Miter Saws (November 2026)
The best Delta 10-inch compound miter saws include the DEWALT 12-inch Double Bevel Miter Saw for wide cuts and two-way bevels, the Makita LS1019L 10" Dual-Bevel Sliding Compound Miter for compact sliding capacity, and the DEWALT 12-Inch Miter Saw for a simple 12-inch setup.
On this page (5 sections)
The best Delta 10 inch compound miter saw depends on your cut width and bevel needs. The models in this roundup are alternatives from other brands, since none of the listed picks is made by Delta.
We compared the listed features with the needs behind this search: 10-inch blade size, compound bevel cuts, sliding capacity and alignment aids. For smaller saws, see dual bevel saw features.
If you're set on Delta, confirm a specific Delta model's current specifications before choosing; the alternatives below show which features may matter for your work.
Our score weighs specs, features and buyer feedback against what you're shopping for.
Our picks at a glance
-
1
Best for wide cuts and two-way bevelsDEWALT 12-inch Double Bevel Miter Saw
9.7/10 our score
See it on Amazon -
2
Best for compact sliding capacityMakita LS1019L 10" Dual-Bevel Sliding Compound Miter
9.7/10 our score
See it on Amazon -
3
- 4
Check itSKIL 10" Dual Bevel Sliding Compound Miter
Best for 10-inch dual-bevel cuts - 5
Check itMetabo HPT 10-Inch Compound Miter Saw
Best for a light single-bevel saw - 6
Best for a basic left bevelCheck it - 7
Check itGenesis GMS1015LC 15-Amp 10-Inch Compound Miter Saw
Best for fixed-angle stops - 8
Check itDOVAMAN 10-Inch Sliding Miter Saw
Best for multi-material blade options - 9
Check itEvolution Power Tools R255SMS+ PLUS 10-Inch Sliding
Best for mixed-material work
Which Delta 10-inch compound miter saw alternative fits your work?
The Makita LS1019L and SKIL MS6305-00 are the closest matches here for a 10-inch sliding saw with dual bevels. Choose a different pick if you need a 12-inch blade, simpler single-bevel operation or multi-material cutting.
| Product | Best for | Blade | Bevel | Alignment | Our score |
|---|---|---|---|---|---|
| DEWALT 12-inch Double Bevel Miter Saw | wide cuts and two-way bevels | 12 in | Right and left, 0–49 degrees | XPS LED shadow line | 9.7 |
| Makita LS1019L 10" Dual-Bevel Sliding Compound Miter | compact sliding capacity | 10 in | 9.7 | ||
| DEWALT 12-Inch Miter Saw | a simple 12-inch setup | 12 in | Single bevel | 9.3 | |
| SKIL 10" Dual Bevel Sliding Compound Miter | 10-inch dual-bevel cuts | 10 in | 9.2 | ||
| Metabo HPT 10-Inch Compound Miter Saw | a light single-bevel saw | 10 in | 0–45 degrees left | 9.1 | |
| VEVOR Compound Miter Saw | a basic left bevel | 10 in | 0–45 degrees left | LED guide | 8.8 |
| Genesis GMS1015LC 15-Amp 10-Inch Compound Miter Saw | fixed-angle stops | 10 in | Up to 45 degrees left | 8.7 | |
| DOVAMAN 10-Inch Sliding Miter Saw | multi-material blade options | 10 in | 0–45 degrees | 8.7 | |
| Evolution Power Tools R255SMS+ PLUS 10-Inch Sliding | mixed-material work | 10 in | 0–45 degrees | 8.5 |
DEWALT 12-inch Double Bevel Miter Saw: Best for wide cuts and two-way bevels
- 12-inch blade
- Sliding compound design
- XPS LED shadow line
- Dual bevel
A 12-inch blade and sliding compound design suit buyers who need broader capacity than a 10-inch saw. The dual bevel tilts both ways.
Pros
- XPS shadow line
- Dual bevel
- Dust collection system
Cons
- Larger blade than a 10-inch saw
The DEWALT DWS780 is a 12-inch sliding compound saw, so it isn't a direct 10-inch match. It earns a place here for buyers who want more blade size and a two-way bevel setup.
Its XPS LED system projects a shadow line for alignment, and the integrated cutline system provides an adjustment-free indication. The dual bevel tilts right and left from 0 to 49 degrees, with positive stops at common angles.
DEWALT describes the saw's dust collection system as capturing over 75% of generated dust. That may help when connected to suitable collection equipment, though a miter saw can still leave dust around the work area.
Choose it if your cuts benefit from a 12-inch blade and you want to bevel in either direction. If you specifically need a 10-inch saw, compare the Makita or SKIL instead.
Makita LS1019L 10" Dual-Bevel Sliding Compound Miter: Best for compact sliding capacity
- 10-inch blade
- Dual-bevel sliding design
- 6-5/8 in nested crown capacity
- Single-slide rail system
This 10-inch slider combines dual bevels with a rail layout designed to operate flush against a wall. Its stated nested crown capacity is 6-5/8 inches.
Pros
- Dual bevel
- Single-slide rail system
- Large nested crown capacity
Cons
- Heavier than several compact saws
The Makita LS1019L brings together a 10-inch blade, sliding action and dual bevels. Its nested crown molding capacity is 6-5/8 inches, a useful figure to compare against the molding you plan to cut.
Makita's two-rail slide system is designed to operate with the saw flush against a wall. That arrangement may help in a tight workshop, but measure the full saw and workpiece clearance in your own space.
The linear ball bearing system is engineered for accurate cuts, according to Makita. The saw weighs 72.8 pounds, so account for that when moving it between a bench and a job site.
Choose this model when compact rail placement and crown capacity matter more than carrying weight. See our best Bosch miter saw roundup for another brand comparison.
DEWALT 12-Inch Miter Saw: Best for a simple 12-inch setup
- 12-inch blade
- Single bevel
- 14 positive miter stops
- Tall sliding fence
This 12-inch compound saw offers a larger blade and single-bevel operation. Its fence supports base molding vertically.
Pros
- 12-inch blade
- 14 miter stops
- Tall sliding fence
Cons
- Single bevel
The DEWALT DWS715 pairs a 12-inch blade with single-bevel operation. Its stainless-steel miter detent plate has 14 positive stops, and the tall sliding fence supports base molding vertically.
This model bevels 0 to 48 degrees left and 0 to 3 degrees right, according to its product details. That asymmetry is worth checking against the bevel angles your projects use, especially if you often cut matching pieces in both directions.
The stated crosscut capacity is 2x8 lumber at 90 degrees and 2x6 at 45 degrees. Those dimensions give a practical comparison point if you're choosing between a larger blade and a 10-inch slider.
Choose this saw if you want a 12-inch blade and a simpler single-bevel setup. If 10-inch size is fixed, the SKIL or Metabo HPT better fits that constraint.
SKIL 10" Dual Bevel Sliding Compound Miter: Best for 10-inch dual-bevel cuts
- 10-inch blade
- Dual bevel
- LED shadow line
- Cuts up to 50 degrees left and right
A 10-inch sliding saw with dual bevels and an LED shadow line. It lists crosscuts up to 2x12 lumber at 90 degrees.
Pros
- Dual bevel
- LED shadow line
- Wide miter range
Cons
- Check the fence and support fit for your stock
The SKIL MS6305-00 is a strong 10-inch alternative when you want dual bevels and sliding capacity. It crosscuts lumber up to 2x12 at 90 degrees and 2x8 at 45 degrees, according to its stated capacities.
Its LED shadow line marks the cut position, and the miter setting reaches 50 degrees left or right. The product details also describe positive stops at common angles, helping with repeat cuts that use those settings.
The saw weighs 39.4 pounds and comes with extension rods, a dust bag, a hex key and a clamp. Check the space needed for the rods and the stock supports before placing it on a small bench.
Choose it if your priority is a 10-inch dual-bevel slider with a shadow line. For other best Ryobi compound miter saw options, compare blade, slide and bevel features in the same way.
Metabo HPT 10-Inch Compound Miter Saw: Best for a light single-bevel saw
- 10-inch blade
- Single bevel
- 24.2 lb weight
- Miter range up to 52 degrees
This portable single-bevel saw weighs 24.2 pounds and offers miter adjustment up to 52 degrees in either direction.
Pros
- Lightweight
- Wide miter range
- 5-year tool body warranty
Cons
- Single bevel
The Metabo HPT C10FCG2 is a 10-inch single-bevel saw designed for portability. At 24.2 pounds, it is the lightest listed option by the supplied product specifications.
Its miter range reaches 52 degrees left and right, while the bevel tilts up to 45 degrees left. A vice clamp secures the workpiece, and the saw includes an improved miter scale and controls.
This is a fixed-head saw, so it does not provide the sliding action found on the Makita, SKIL, DOVAMAN and Evolution models. Check the maximum crosscut capacity against your usual board width before choosing it.
Choose it if light weight and a broad miter range matter more than dual bevels or slide rails. To understand how a miter saw differs from other saw types, see Do I Need A Compound Miter Saw?.
VEVOR Compound Miter Saw: Best for a basic left bevel
- 10-inch blade
- Single bevel
- LED guide
- Aluminum base
A left-bevel saw with an LED guide and aluminum base. Its bevel range is 0 to 45 degrees left.
Pros
- LED guide
- Aluminum base
- Left bevel
Cons
- Single bevel
The VEVOR is a 10-inch single-bevel saw with an LED guide and an aluminum base. Its head tilts from 0 to 45 degrees left, so it covers common left-bevel cuts without a dual-bevel mechanism.
The maker describes the LED guide as a way to mark the cutting line on the work surface. The base is also described as lighter than a traditional cast-iron base, which may matter if you move the saw between storage and a work area.
The details don't give a crosscut capacity. Measure your widest stock and confirm the saw's capacity before buying for repeated wide cuts.
Choose it if you want a basic left-bevel setup with an LED guide. If bevel direction is important, compare it with a dual-bevel saw such as the SKIL or Makita.
Genesis GMS1015LC 15-Amp 10-Inch Compound Miter Saw: Best for fixed-angle stops
- 10-inch blade
- Laser guide
- Nine positive miter stops
- 45-degree left bevel
The Genesis pairs a laser guide with nine positive miter stops. It supports bevel cuts up to 45 degrees left.
Pros
- Nine positive miter stops
- Laser guide
- Electric brake
Cons
- Single bevel
The Genesis GMS1015LC is a 10-inch compound saw with a laser guide and nine positive miter stops. It bevels up to 45 degrees left and makes miter cuts up to 45 degrees in either direction.
The included 60-tooth carbide blade, hold-down clamp, dust bag and two extension wings give you several setup parts in the box. An electric brake stops the blade, while an arbor lock helps with blade changes.
The stated maximum capacity at a 45-degree miter and bevel is 1-3/8 inches high by 3-5/16 inches wide. Use that figure when deciding whether it can handle your trim profile at a compound angle.
Choose it for common fixed angles and a laser guide. For a wider range of cuts, compare a sliding model and verify the capacity at the angles you use.
DOVAMAN 10-Inch Sliding Miter Saw: Best for multi-material blade options
- 10-inch sliding design
- Three TCT blades included
- Two speed settings
- Laser guide
The sliding design and included blades are aimed at wood, PVC and soft metal cuts. It also has two speed settings and a laser guide.
Pros
- Three blades included
- Two speed settings
- Sliding rail
Cons
- Check the blade and material match before cutting
The DOVAMAN DMS01A combines a 10-inch sliding rail with two speed settings and three TCT blades. Its details describe cutting wood, PVC and soft metals, but check the blade guidance for the specific material before use.
The laser guide helps indicate the cut line, while extendable side tables support longer stock. A 0 to 45 degree bevel range and nine positive stops cover a range of common angled cuts.
Its stated maximum cut is 4 x 13 inches in one product highlight, while another highlight gives 3.5 x 13.4 inches. Because those figures differ, verify the exact capacity for the model and cut angle before relying on it.
Choose it if the included blade selection and speed settings fit your planned materials. If you mainly cut wood, a simpler saw with a clearly stated capacity may be easier to compare.
Evolution Power Tools R255SMS+ PLUS 10-Inch Sliding: Best for mixed-material work
- 10-inch sliding design
- Multi-material cutting
- 0–45 degree bevel
- 50-degree miter left and right
Evolution describes this saw for cutting wood, wood with embedded nails, composite decking, plastic and mild steel with one blade.
Pros
- Multi-material capability
- Wide miter range
- Dual quick-release clamps
Cons
- Confirm the included blade suits your materials
The Evolution R255SMS+ is a 10-inch sliding saw aimed at mixed-material jobs. Evolution describes it as able to cut wood, wood with embedded nails, composite decking, plastic and mild steel with one blade.
Its bevel range is 0 to 45 degrees, and its miter angle reaches 50 degrees in both directions. The package includes dual quick-release clamps, a dust bag, taller fences and a slide rail protector.
Evolution says cuts in mild steel produce virtually no sparks and stay cool to the touch. Use the correct material and blade guidance, secure the work and follow the manual's safety instructions for every cut.
Choose it when the range of materials matters more than matching a traditional wood-only miter saw. For wood-focused jobs, compare its capacity and blade setup with the Makita or SKIL.
How do blade size and sliding capacity affect the choice?
A 10-inch blade is a useful size target, but it does not set crosscut width by itself. Sliding rails let the blade travel across a wider board, so compare the stated capacity at the angles you expect to cut.
The Makita lists a 6-5/8-inch nested crown capacity, while SKIL gives crosscut figures for 2x12 stock at 90 degrees and 2x8 at 45 degrees. Those are different measurements, so match the saw's published capacity to your actual molding or lumber.
A 12-inch saw may fit better if you regularly need the larger blade format or want a broader cutting setup. The two DEWALT models here use 12-inch blades, while several 10-inch options add slide rails.
Does dual bevel matter for compound cuts?
A dual-bevel saw tilts left and right, which can reduce workpiece flipping when making opposing bevel cuts. A single-bevel saw still makes compound cuts, but you may need to turn the material or reset the saw for the opposite direction.
The Makita and SKIL offer dual bevels among the 10-inch alternatives here. The Metabo HPT, VEVOR and Genesis use single-bevel layouts, so choose them if their other features match your work and one-way beveling is acceptable.
For a brand-wide comparison, read What Is a Good Miter Saw Brand? and weigh service, feature fit and model availability alongside the saw's specifications.
Which alignment and work-support features are useful?
An LED shadow line or laser guide can help you see the intended cut position, while fences, clamps and extension supports help control the workpiece. These features support setup, but you should still verify alignment and secure stock before cutting.
The DEWALT DWS780 and SKIL use shadow-line systems, while Genesis, VEVOR and DOVAMAN describe laser or LED guides. The Makita includes a laser and the Evolution package adds taller fences and quick-release clamps.
If you want to compare brand options by feature mix, see How Much Is A Ryobi Miter Saw? for a related Ryobi buying guide. Check current model details for any saw you shortlist, especially capacity and included accessories.
Which saw should you choose?
Choose the Makita LS1019L for a 10-inch dual-bevel slider with wall-friendly rail placement, or the SKIL MS6305-00 for a lighter 10-inch dual-bevel option with stated crosscut capacity. Pick a single-bevel model when its weight, stops or included setup better match your projects.
If you need a 12-inch blade, consider the DEWALT DWS780 for dual bevels or the DWS715 for single-bevel cuts. For a Delta purchase specifically, use these comparisons to define the features you need, then verify the current Delta model's specifications before deciding.
Our top 3 picks at a glance
-
1
Best for wide cuts and two-way bevels
DEWALT 12-inch Double Bevel Miter Saw
9.7/10 our score
See it on Amazon -
2
Best for compact sliding capacity
Makita LS1019L 10" Dual-Bevel Sliding Compound Miter
9.7/10 our score
See it on Amazon -
3
Frequently asked questions
Does this roundup include a Delta saw?
No. The products here are alternatives from other brands, not Delta models.
Use the feature comparisons to identify the blade size, slide capacity and bevel setup you need, then check Delta's current range separately if buying Delta specifically.
Is a 10-inch compound miter saw enough?
A 10-inch saw can suit trim, framing and many home projects, but blade size alone doesn't tell you the maximum cut width. Sliding rails add crosscut capacity, so compare the saw's stated capacity with your widest stock.
For a broader comparison, see What Is the Best 10 Inch Miter Saw?.
Should I choose a dual-bevel miter saw?
A dual-bevel saw tilts both left and right, which can reduce the need to flip a workpiece for opposing bevel cuts. A single-bevel saw can be enough if your projects use one bevel direction or you don't mind resetting the stock.
See Do I Need A Compound Miter Saw? for help deciding which cut types matter.
What should I compare when choosing a Delta-style saw?
Compare blade size, sliding capacity, bevel direction, miter stops, fence support and alignment aid. These details affect whether a saw suits trim, framing or wider boards.
For brand-level selection factors, read What Is a Good Miter Saw Brand?.
