9 Best Portable Workbench with Vise (November 2026)
The best portable workbenches with a vise include the WORX Portable Folding Workbench for most portable projects, the Pony Portable Folding Work Table for adjustable height, and the Performance Tool W54025 Portable Folding Workbench for measuring at the bench.
On this page (3 sections)
The best portable workbench with vise for most DIY projects is the WORX Portable Folding Workbench. It combines a folding work table, integrated quick clamps, clamp dogs, a 32 in working height and a 300 lb table capacity.
That mix suits people who move between jobs around a garage, yard or small workshop. You get a work surface for assembly and a sawhorse mode for support without keeping separate stands for each task.
Choose the PONY if adjustable height matters most. For a wheeled version of that setup, see adjustable-height workbenches on wheels.
Height adjustment can make a real difference over a long session. A lower position may feel steadier for heavy hand pressure, while a higher position can reduce bending for lighter layout and assembly work.
Pick the POWERTEC for a lighter woodworking station, or add the VEVOR bench vise to a compatible portable table when you want a separate rotating vise.
The choice comes down to how you prefer to hold work. Integrated clamps keep setup simple, while a separate vise gives more control over angle and jaw position.
We compared the stated work surfaces, capacities, vise or clamping systems, portability features and included accessories. Our score weighs specs, features and buyer feedback against the needs of someone shopping for a portable workbench with a vise.
Portability was part of that comparison because a folding bench only helps if you will actually carry and store it. Weight, folded size and setup steps all affect how often a bench gets used.
Set up and care also matter in daily use. Check that legs lock fully, keep clamp threads and hinges clean, and store the bench dry so joints and printed scales stay usable.
If you are comparing clamping tools more broadly, our guide to woodworking clamps explains how different clamp types hold boards, panels and irregular workpieces.
Use that guide alongside the bench specs when you shop. The right clamp for a panel may differ from the right setup for a small board, a round piece or a long length of lumber.
Our picks at a glance
-
1
-
2
-
3
Best for measuring at the benchPerformance Tool W54025 Portable Folding Workbench
9.4/10 our score
See it on Amazon
- 4
Check itTLGREEN 7in1 Multifunctional Portable Workbench
Best for multi-use garage work - 5
Check itPOWERTEC Portable Small Workbench with Vise
Best for lightweight woodworking - 6
Check itTurboforce Express Folding Worktable
Best for fast setup - 7
Best for adding a vise to a tableCheck it - 8
Best for wood-friendly clampingCheck it - 9
Check itAuto Dynasty Folding Workbench w/Vise
Best for adjustable-width work
The best portable workbench with vise options
The best portable workbench with vise depends on how you plan to hold material, move the bench and store it after the project. The WORX and PONY are the most complete folding workstations, while the VEVOR and Fetcoi are separate vise options for a table you already own.
Think about your usual workpiece size before you narrow the list. Small parts need secure, close control, while long boards need support length and room for clamps.
Also think about where the bench will live. A bench that folds flat suits a crowded garage, while a wheeled station suits moving between bays or outdoor work areas.
Care needs are simple but worth planning. Wipe surfaces after dusty work, check fixings before heavy jobs, and keep moving parts free of grit so folding stays smooth.
Best portable workbench with vise: WORX Portable Folding Workbench
WORX Portable Folding Workbench: Best for most portable projects
- 2-in-1 workbench and sawhorse
- 31 x 25 in work surface
- 300 lb table capacity
- 2 quick clamps and 4 clamp dogs
The WORX Pegasus combines a folding work table with a sawhorse and includes quick clamps, clamp dogs and table links. Its 32 in working height and 30 lb weight suit mobile garage and jobsite work.
Pros
- Integrated clamping system
- Folds for carrying and storage
- Converts to a sawhorse
- Built-in measuring guide
Cons
- Table capacity is lower than its sawhorse capacity
- The work surface is smaller than a permanent bench
The WORX Portable Folding Workbench is the best all-around choice because it combines a workbench and sawhorse in one folding unit. The table measures 31 x 25 in and has a 32 in working height.
Its integrated clamping system includes two 24 in quick clamps and four clamp dogs. The clamps provide up to 301 lb of stated clamping force, while the table supports up to 300 lb as a workbench.
The 2-in-1 design gives you more flexibility than a basic folding table. The sawhorse mode supports up to 1,000 lb, but that figure applies to sawhorse use rather than the workbench surface.
The WORX weighs 30 lb and folds for carrying and storage. A built-in measuring guide helps with layout, and table links let you connect another compatible WORX support table when you need more surface area.
Choose it for general woodworking, painting, repairs and cutting support. Read our WORX Pegasus work table review for a closer look at this model.
Best for adjustable height: PONY Portable Folding Work Table
Pony Portable Folding Work Table: Best for adjustable height
- 2-in-1 workbench and sawhorse
- 6 height positions
- 500 lb table capacity
- 4 clamps and 4 bench dogs
The PONY folding work table offers six height settings and includes four clamps, four bench dogs and two safety straps. It folds flat for transport and storage.
Pros
- Six height positions
- Higher table capacity than many folding benches
- Includes several clamps and bench dogs
- No detailed assembly required
Cons
- The height range needs checking for your preferred working position
- It is heavier than the POWERTEC bench
The PONY Portable Folding Work Table is the strongest pick when you want to change the working height. It adjusts through six positions from 30 to 35 in, helping you match the bench to different tasks or users.
It supports up to 500 lb as a table and up to 1,000 lb as a sawhorse. The aluminum leg frame keeps the design portable, while the folding body lies flat for transport or storage.
PONY includes two 12 in medium-duty E-Z HOLD bar clamps, two 6 in light-duty clamps, two large bench dogs, two small bench dogs and two safety straps. That gives you more included workholding hardware than a basic table.
Choose the PONY if your projects vary in height or you need a higher stated table capacity. Compare it with our guide to the best portable folding workbench options for more folding designs.
Best for measuring at the bench: Performance Tool W54025
Performance Tool W54025 Portable Folding Workbench: Best for measuring at the bench
- One-handed clamp system
- Printed grid, ruler and protractor
- 200 lb safe working load
- Angled jaws for unusual shapes
The Performance Tool W54025 uses a one-handed clamp system with independently adjustable jaws. Its printed grid, ruler and protractor help with measuring directly on the work surface.
Pros
- One-handed jaw adjustment
- Printed measuring guides
- Folds for storage
- Jaws can accommodate angled shapes
Cons
- Basic assembly is required
- Lowest table capacity among the first three picks
The Performance Tool W54025 Portable Folding Workbench is a useful choice for projects that need layout marks directly on the table. Its printed tabletop includes a grid, ruler and protractor.
Those marks suit repeated measuring and angle checks during cutting and assembly. A printed grid can speed up rough layout, while a ruler and protractor help with quick reference without hunting for separate tools.
The one-handed clamp system allows independent jaw adjustment. That can help when one side of a workpiece needs more movement than the other during setup.
The jaws can also angle to hold unusually shaped material, which helps when a square clamp position does not fit the workpiece. Angled jaws are not a replacement for testing grip, so check the hold before you start cutting.
The table measures 23 7/8 x 25 x 31 in and has a 200 lb safe working load. That capacity suits lighter to mid-sized tasks, and the load should stay centered for best stability.
A tool storage rail keeps small tools within reach, and the folding frame reduces storage space after the project. Keep the rail clear of dust and chips so tools do not slide during work.
This workbench needs basic assembly. Choose it when built-in measuring marks and adjustable jaws matter more than a high table capacity.
Set up on a flat floor and tighten fittings before use. Wipe the printed top with a damp cloth rather than harsh cleaners, since the markings are part of the working surface.
Best for multi-use garage work: TLGREEN 7in1 Multifunctional Portable Workbench
TLGREEN 7in1 Multifunctional Portable Workbench: Best for multi-use garage work
- 7 working modes
- Built-in power outlet
- Casters and folding design
- 330 lb workbench capacity
The TLGREEN changes between seven work modes and adds a built-in power outlet, tool tray and clamp holes. It suits garage projects where one mobile station must handle several tasks.
Pros
- Seven work modes
- Built-in power strip
- Lockable wheel system
- Detachable tool tray
Cons
- Clamps are not included
- Its larger folded design may need more storage planning
The TLGREEN 7in1 Multifunctional Portable Workbench is designed for more than clamping boards. It works as a folding workbench, sawhorse, scaffold, low platform, dolly, hand truck and rolling creeper board.
Its workbench, sawhorse, dolly, creeper and hand truck modes support up to 330 lb, while scaffold or platform mode supports up to 440 lb of distributed weight. Lockable wheels help it move between storage and working areas.
For a stable rolling shop bench, compare leveling casters for workbenches. If you want to add mobility to a shop bench, compare workbench caster wheels.
A built-in power outlet gives you a place to connect lights, chargers, drills, sanders and other small workshop devices. The detachable tool tray holds hardware, and clamp holes help secure material.
Clamps are not included, so plan to add your own workholding setup. Pick this model when mobility and several working modes matter more than a dedicated integrated vise.
Best for lightweight woodworking: POWERTEC Portable Small Workbench with Vise
POWERTEC Portable Small Workbench with Vise: Best for lightweight woodworking
- Adjustable vise panels
- Bamboo worktop
- 4 bench dogs
- 11 lb weight
The POWERTEC MT4006V is a compact folding workbench with adjustable vise panels, four bench dogs and a bamboo top. Its 11 lb weight makes it easy to move between work areas.
Pros
- Lightest full workbench in this group
- Built-in ruler and protractor scale
- Bamboo worktop
- Tool storage rack
Cons
- Narrower work surface
- The worktop is less suited to large materials
The POWERTEC Portable Small Workbench with Vise is the easiest full bench here to carry between rooms or job areas. It weighs 11 lb and uses a steel frame with a bamboo worktop.
That low weight suits renters, hobbyists and anyone who works in a spare room or shared garage. You can carry it to a bench, table or open floor area without planning the move around it.
Its adjustable vise panels hold workpieces for clamping, cutting and painting. Adjustable panels are useful for small boards and parts where a fixed jaw may leave too much unused space.
Four bench dogs add more workholding positions, while the built-in ruler, protractor scale and storage rack support small woodworking projects. Bench dogs help you register a board so it does not shift while you work.
The worktop measures 23.8 x 13 in, so it suits smaller boards and parts better than large sheet goods. The narrow depth makes it compact, but long material will often need extra support beyond the bench.
The stated capacity is 220 lb, which is enough for many hand-tool and small power-tool tasks when the work is centered. Keep the load balanced and avoid leaning on one edge.
Choose POWERTEC for a compact woodworking station that you can move often. It is less suitable when you need a broad surface for long boards or bulky assemblies.
For care, wipe the bamboo top after dusty work and check the steel frame joints from time to time. Store it where the top stays dry, since bamboo and printed scales both benefit from a clean, dry surface.
Best for fast setup: Turboforce Express Folding Worktable
Turboforce Express Folding Worktable: Best for fast setup
- Folds in about 3 seconds
- Bench dog holes and X-shaped grooves
- Metal legs
- Compatible with trigger clamps
The Turboforce folding worktable focuses on quick setup, a broad work surface and clamp flexibility. Bench dog holes, X-shaped grooves and measurement markings support common workholding tasks.
Pros
- Very fast folding setup
- Wide work surface
- Compatible with trigger clamps
- Light enough for mobile work
Cons
- Clamps are not included
- Capacity information varies between the stated product details
The Turboforce Express Folding Worktable focuses on quick setup. It folds in about 3 seconds and weighs about 22 lb, making it practical when you move between storage and a project area often.
Fast folding suits short jobs and shared spaces. You can set it up for a repair, then fold it away without leaving a full workbench in the way.
The 33.5 x 24 in work surface is one of the wider options in this group. That extra width gives more room for layout, parts and tools during assembly or painting.
Bench dog holes, X-shaped grooves and measurement markings support clamping and layout work. The grooves and holes give you options for trigger clamps, while the markings help with quick checks.
The table accepts trigger clamps, but clamps are not included. If you already own trigger clamps, this is flexible, but you should budget for workholding if you do not.
The details also show different capacity figures, so confirm the current capacity before using it for a heavy load. Treat the lower stated figure as the safer guide until you have clarity.
Choose this worktable when speed, surface width and compatibility with your existing trigger clamps matter most.
Set it on a level floor and check that all legs are fully open before loading it. Wipe the metal top clean after work and keep grooves free of debris so clamps seat properly.
Best for adding a vise to a table: VEVOR Bench Vise
VEVOR Bench Vise: Best for adding a vise to a table
- 4.5 in jaw width
- 270-degree swivel base
- Quick-release design
- Cast iron construction
The VEVOR Bench Vise turns a suitable portable table into a vise station. Its textured jaws, quick-release design and 270-degree swivel base give you flexible positioning for woodworking and metalworking.
Pros
- Useful swivel range
- Textured anti-slip jaws
- Includes jaw covers and mounting hardware
- Works with different workpiece shapes
Cons
- It requires a compatible surface for mounting
- It adds 13.5 lb to a portable setup
The VEVOR Bench Vise is the right choice when you already have a portable table and want a separate vise. It has 4.5 in jaws, textured gripping surfaces and a 270-degree swivel base.
The swivel range helps with positioning. You can turn the workpiece toward you for drilling or sawing, then turn it again for a different cut without moving your body around the table.
The quick-release design helps open and close the jaws faster during repeated work. That speed matters when you change workpieces often or need to clear the vise quickly.
The cast iron style construction includes a thickened anvil area for tasks that need a firm striking surface. Use that area for light hammering only as intended, and keep the jaws clean for best grip.
This vise weighs 13.5 lb, so include its weight when planning a portable setup. A light folding table may need extra care to stay stable with a heavy vise mounted on it.
It also needs a suitable mounting surface and hardware arrangement to hold it securely. Check the tabletop thickness and mounting points before you attach it.
Pick it for woodworking, drilling, cutting conduit and other tasks that benefit from a dedicated vise. It does not replace a folding workbench by itself.
For care, wipe the jaws after metal or dusty work and check mounting hardware regularly. Light oil on moving parts can help keep the quick-release action smooth.
Best for wood-friendly clamping: Fetcoi Woodworking Bench Vise
Fetcoi Woodworking Bench Vise: Best for wood-friendly clamping
- Solid beech wood construction
- 7.87 in jaw opening
- 2 fixing clips
- 4 metal limit blocks
The Fetcoi woodworking bench vise uses a beech wood clamping surface and mounts to a tabletop with two fixing clips. It is designed for carving, planing, chiseling and small woodworking tasks.
Pros
- Wood clamping surface
- Wide stated jaw opening
- Includes mounting clips
- Compact tabletop format
Cons
- It is a vise kit rather than a complete folding workbench
- The wood surface needs care during workshop use
The Fetcoi Woodworking Bench Vise is a compact tabletop vise with a solid beech wood clamping surface. The wood contact area is suited to users who want to reduce the chance of marking softer workpieces with metal jaws.
That wood-friendly contact is useful for carving, shaping and other detailed work. It will not suit every job, but it can reduce dents on finished or soft pieces.
It has a stated jaw opening of 7.87 in and weighs 13 lb. The wide opening helps with larger small-shop pieces, while the weight means you still need a stable table underneath.
Two G-type fixing clips mount it to a tabletop, while four metal limit blocks provide different clamping positions. Those blocks let you change how a workpiece is supported across the jaw.
The kit also includes a small wood plate. Use the plate as a spacer or support where the shape of the workpiece needs a flatter contact point.
Its format suits carving, planing, chiseling, cutting joints and small DIY work more than large construction material. Keep the workpiece fully seated in the jaw before applying force.
Choose Fetcoi when wood-friendly contact and a wide jaw opening matter. Since it is a vise kit rather than a complete folding bench, pair it with a stable table.
For care, wipe the beech surface after dusty work and avoid soaking it with water. Check the fixing clips before each session so the vise does not shift on the tabletop.
Best for adjustable-width work: Auto Dynasty Folding Workbench w/Vise
Auto Dynasty Folding Workbench w/Vise: Best for adjustable-width work
- Adjustable 11.65 to 22 in width
- Printed ruler and protractor
- Folding design
- 100 kg capacity
The Auto Dynasty folding workbench uses a crank arm to adjust its working width and a pin to clamp different shapes. Its printed ruler and protractor add measuring help to a compact steel frame.
Pros
- Adjustable work width
- Printed measuring tools
- Folds for storage
- Anti-slip feet
Cons
- Smaller width range than a full-size work table
- The 8 in minimum height may not suit every task
The Auto Dynasty Folding Workbench w/Vise uses an adjustable work width from 11.65 to 22 in. A crank arm changes the working position, while a pin helps clamp material of different shapes.
That width adjustment suits users who work with mixed small parts. You can narrow the setup for a small piece or open it for a wider board without changing benches.
The printed worktop includes a ruler and protractor for basic layout. The marks help with quick checks, though you should still use a tape measure for precise work on longer pieces.
The alloy steel frame folds for storage, and anti-slip feet help keep the bench in place during work. Anti-slip feet work best on a clean, flat floor.
Its stated capacity is 100 kg. That rating should guide how much weight and pressure you put through the bench during cutting or drilling.
The model also has an 8 in minimum height, so measure your preferred working position before choosing it for repeated use. A low bench can suit seated work or low tasks, but it may not suit tall users for long sessions.
Pick this workbench when adjustable width matters more than a large fixed work surface. It is a compact option for home repairs, drilling, cutting and smaller woodworking projects.
Set up the crank and pin before you load the bench, and check that the width stays fixed under pressure. Wipe the printed top with a soft cloth and check the feet for wear over time.
How to choose a portable workbench with a vise
The right portable workbench with a vise should match your workpiece size, clamping method, working height and storage space. A high capacity alone does not tell you how well the jaws will hold your material.
Do you need integrated vise jaws or a separate bench vise?
Integrated vise jaws keep the bench ready to use and reduce the number of parts you carry. The WORX, Performance Tool and POWERTEC models include built-in clamping features, while the PONY includes several clamps and bench dogs.
That setup suits fast starts and simple storage. You open the bench, place the workpiece and clamp it without searching for separate workholding tools.
A separate vise gives you more control over jaw shape and positioning. The VEVOR swivels through 270 degrees, while the Fetcoi uses a wood clamping surface and tabletop clips.
Separate vises also let you move workholding to a different table. That can be useful if you already own a sturdy bench and only need better control over the workpiece.
Choose an integrated system for fast setup. Choose a separate vise when you already have a sturdy portable table or want to replace the vise without replacing the whole workbench.
Think about the shape of your usual work. Flat boards, small parts and round pieces all stress a clamping system in different ways.
Also check jaw opening and support area, not just load capacity. A bench can hold weight yet still struggle to grip a slick or irregular piece securely.
For care, keep jaw faces clean and check bench dogs, pins and clamp pads for wear. A quick test grip before cutting can save both the workpiece and the bench.
How much work surface do you need?
Measure the longest and widest material you expect to hold, then leave room for clamps and hand movement. The Turboforce offers a 33.5 x 24 in surface, while the WORX measures 31 x 25 in.
The POWERTEC measures 23.8 x 13 in, so it is better for small parts and compact woodworking. A narrow bench can be easier to carry, but long boards may need extra support.
If you want a mobile station with wheels, compare these picks with the best portable workbenches on wheels.
What capacity should a folding workbench have?
Choose a capacity above the combined weight of the workpiece, tools and clamping force you expect to apply. The WORX supports 300 lb as a workbench, the PONY supports 500 lb, and the Performance Tool supports 200 lb.
Do not use a sawhorse capacity as the workbench capacity. Several models have different ratings for different modes, so match the rating to the way you will use the bench.
Which clamping accessories matter?
Bench dogs help position boards in holes, while bar clamps hold material against the work surface. Quick clamps save setup time, and adjustable vise panels can hold different shapes.
The WORX includes two quick clamps and four clamp dogs. The PONY includes four clamps and four bench dogs.
The TLGREEN and Turboforce models require you to add compatible clamps.
For a broader comparison of built-in and add-on options, see our guide to the best portable workbenches with clamps.
What working height is best?
A 30 to 35 in bench suits many standing tasks, but the best height depends on your body position and project. The PONY offers six settings from 30 to 35 in, while the WORX stands at 32 in.
Lower work can suit heavier hand pressure, while a higher surface may reduce bending during light assembly or painting. If you use a miter saw with a portable station, also compare the Best Folding Miter Saw Stand and Best Miter Saw Portable Jobsite Use guides.
Final verdict on the best portable workbench with vise
The WORX Portable Folding Workbench is the best portable workbench with vise for most users because it combines integrated clamps, a useful 31 x 25 in surface, a 32 in height and a sawhorse mode.
That balance makes it easy to recommend for general DIY work. You can assemble, paint, repair and support material on one folding unit.
Pick the PONY if you need six height settings and a higher table capacity. Choose POWERTEC for lightweight woodworking, VEVOR for a separate rotating vise, or TLGREEN for a mobile garage station with seven working modes.
Each pick suits a different workflow. Height adjustment helps varied users, light weight helps frequent moves, and a separate vise helps when you already have a good table.
For a complete setup, choose the bench that fits your material first, then confirm the vise opening, included clamps and folded storage size.
Measure your longest board and your storage space before you buy. A bench that fits your room and your work will get used far more than a larger one you cannot store.
Check care needs as part of the decision too. Wipe surfaces, keep hinges and clamp parts clean, and tighten fixings before heavy work.
If you already own clamps, a bench without included clamps may still work well. If you want everything in one box, integrated clamps and bench dogs save time and money.
Our top 3 picks at a glance
-
1
-
2
-
3
Best for measuring at the bench
Performance Tool W54025 Portable Folding Workbench
9.4/10 our score
See it on Amazon
Frequently asked questions
What is the best portable workbench with vise for most people?
The WORX Portable Folding Workbench is the best portable workbench with vise for most DIY users because it combines a 31 x 25 in work surface, 32 in height, integrated quick clamps, clamp dogs and a 300 lb table capacity. It also converts into a sawhorse for larger support tasks.
Do portable workbenches include a vise?
Some portable workbenches use integrated vise-style jaws, quick clamps or adjustable panels instead of a separate metal vise. The Performance Tool, POWERTEC and Auto Dynasty models provide built-in workholding features.
The VEVOR and Fetcoi options are separate bench vises that need a suitable table.
Is a folding workbench strong enough for woodworking?
Yes, a folding workbench can handle many woodworking tasks when its stated capacity matches the material and tool load. The PONY supports up to 500 lb as a table, while the WORX supports up to 300 lb.
Keep the bench on a stable surface and clamp the workpiece securely.
What should you check before buying a portable workbench with a vise?
Check the work surface size, working height, table capacity, folding footprint and included clamping parts. Also confirm whether the vise is integrated or must be mounted, since a separate vise adds weight and needs a compatible tabletop.
For larger boards, compare the jaw opening and support area.
