7 Best Quick Release Pipe Clamps (November 2026)
The best quick release pipe clamps include the ROBLOCK Quick Release Rubber Clamp Mounts for small tool handles, the Eyeshot Truss Clamp Stage Lights Clamps Black for high-load truss mounting, and the GRIFITI Nootle Quick Release Pipe Clamp for phone and camera mounting.
On this page (5 sections)
The best quick release pipe clamps are the Eyeshot Truss Clamp Stage Lights Clamps for large pipe diameters and high stated load capacity. Choose GRIFITI for phone or camera mounting, ROBLOCK for small tool handles, or JIANXIAOGUO for hydraulic quick-coupler work.
Quick release clamps earn their place when you repeat the same positioning task several times. A lever, knob or sliding jaw can save the time you would spend on full removal and refitting.
That benefit only matters when the clamp fits the pipe and suits the load. A fast mechanism will not correct a mismatch in diameter, shape or mounting thread.
This roundup includes storage clamps, phone and camera mounting hardware, stage truss clamps and a hydraulic quick-coupler hand clamp. They are not interchangeable, so match the product to the task before comparing scores.
ROBLOCK suits small handles in a garage, boat, RV or ATV setup. Its rubber form is aimed at storage and securing rather than heavy pipe work or glue ups.
Eyeshot, jindaaudio and the two Douzime options suit stage and truss mounting. Their jaw shapes, bolts and load figures follow lighting practice, so they need the same care with pipe size and fixture hardware.
GRIFITI sits in a different lane again. It pairs a pipe clamp with a phone mount for tripods, stands and handlebars, which makes it practical for content and reference use.
JIANXIAOGUO is a service tool for hydraulic quick couplers on equipment such as excavators and tractors. Its jaw sets and handle length reflect that job, not general bench clamping.
For a wider look at woodworking clamps, start with the site's complete category guide. If you need a traditional woodworking setup, compare these picks with the guide to best pipe clamps for woodworking.
Read the fit range first, then the load and the release method. That order helps you rule out poor matches before you look at pack size or score.
Set up each clamp on a dry pipe and check that the jaws seat fully. Then lock it, apply a light test, and confirm nothing slips before you put real weight on it.
Care is simple but steady. Wipe away grit, check rubber pads and teeth for wear, and keep threaded parts clean so the quick action stays smooth.
Our picks at a glance
-
1
Best for small tool handlesROBLOCK Quick Release Rubber Clamp Mounts
9.6/10 our score
See it on Amazon -
2
Best for high-load truss mountingEyeshot Truss Clamp Stage Lights Clamps Black
9.5/10 our score
See it on Amazon -
3
Best for phone and camera mountingGRIFITI Nootle Quick Release Pipe Clamp
9.3/10 our score
See it on Amazon
- 4
Check itJIANXIAOGUO 18” Quick Coupler Mate Pipe Clamps
Best for hydraulic quick couplers - 5
Check itjindaaudio Stage Lighting Truss Clamp
Best for three pipe diameters - 6
Check itDouzime Stage Light Clamp Hook Mount
Best for 32 to 35 mm truss - 7
Check itDouzime 2 Pcs DJ Stage Lighting Truss
Best for a matching pair
How we chose the best quick release pipe clamps
The best quick release pipe clamps match the measured outside diameter and the job's load needs. We compared the stated fit ranges, materials, release features, pack sizes and intended uses supplied for these products.
Outside diameter is the first filter. Small differences change whether a jaw closes squarely or rests on an edge, and that affects grip and safety.
The score weighs specs, features and buyer feedback against what you're shopping for. It also reflects how directly each product fits the phrase quick release pipe clamps, since a small rubber storage mount solves a different problem from a stage truss clamp.
Specs tell you the claimed range and capacity. Features tell you how the clamp is meant to be opened, locked and removed in daily use.
Pack size matters for repeat work. A multi pack suits a wall of tools or a rig with several fixtures, while a single clamp suits one replacement point.
Material shapes care and handling too. Rubber grips and protects a handle, aluminium suits truss hardware, and steel suits a service tool, so each needs a different check routine.
We did not treat all seven products as general-purpose clamps. The GRIFITI is a mounting tool, JIANXIAOGUO is a hydraulic service tool and the stage products are for lighting or truss work.
That difference matters more than a high load figure alone. A clamp built for a fixture may have the wrong jaw shape for a workpiece, and a storage clamp may not suit a suspended load.
Release design was part of the comparison. A lever, knob, hook or adjustable jaw each changes how fast you can reposition the clamp and how clear the locked state feels.
Honest trade offs stayed in view. Narrow ranges can offer a precise fit, while broad ranges help when pipe sizes vary, but neither helps if the stated load does not suit your setup.
Measure the pipe before you buy. A clamp that opens quickly is still a poor choice if the jaws do not fit the outside diameter or the mounting hardware does not match your setup.
Use a tape or caliper and record the number before you order. Then match that number to the stated range and keep the job and load beside it.
| Product | Best for | Count | Fit | Material | Our score |
|---|---|---|---|---|---|
| ROBLOCK Quick Release Rubber Clamp Mounts | small tool handles | 4 clamps | 0.8 to 1.2 in diameter | Rubber | 9.6 |
| Eyeshot Truss Clamp Stage Lights Clamps Black | high-load truss mounting | 4 clamps | 40 to 60 mm pipe OD | Aluminum alloy 6061 | 9.5 |
| GRIFITI Nootle Quick Release Pipe Clamp | phone and camera mounting | Pipes up to 1.5 in diameter | Full metal construction | 9.3 | |
| JIANXIAOGUO 18” Quick Coupler Mate Pipe Clamps | hydraulic quick couplers | High carbon steel | 9.0 | ||
| jindaaudio Stage Lighting Truss Clamp | three pipe diameters | 2 clamps | 25, 38 and 50 mm pipe | Fiberglass | 8.8 |
| Douzime Stage Light Clamp Hook Mount | 32 to 35 mm truss | 1 clamp | 1.25 to 1.38 in pipe OD | Aluminum alloy 6061 | 8.6 |
| Douzime 2 Pcs DJ Stage Lighting Truss | a matching pair | 2 clamps | 1.25 to 1.38 in pipe OD | Aluminum | 8.3 |
Quick release pipe clamps compared by use
The ROBLOCK is the easiest fit for small handles and storage, while Eyeshot is the strongest match for a broad pipe range and high stated capacity. GRIFITI is the better choice when the clamp must also hold a phone or lightweight camera.
ROBLOCK for small tool handles and storage
ROBLOCK Quick Release Rubber Clamp Mounts: Best for small tool handles
- 4 rubber clamps
- Fits 0.8 to 1.2 in diameters
- Each clamp supports 25 lb
- Adjustable tension
These compact rubber clamps suit repeated storage and securing tasks for tool handles, hoses and similar items within the stated diameter range. Their quick-release format makes repositioning easier than fixed storage brackets.
Pros
- 4-piece set
- Rubber grip
- 25 lb support per clamp
Cons
- #10 screws or bolts are not included
- Limited to 0.8 to 1.2 in diameters
ROBLOCK is the most practical choice for organizing small handles, hoses, axes or similar items that measure between 0.8 and 1.2 in in diameter. The 4-piece set gives you several mounting points for a garage, boat, RV, ATV or another storage area.
Each clamp is made from rubber and supports 25 lb. That stated capacity is useful for deciding how much weight to place in each mount, but the wall, screws and bolts also need to suit the installation.
Installation uses #10 screws or bolts, which are not included. The clamp tension can be adjusted without tools, so you can position the handle and make a small fit change without rebuilding the mount.
The rubber grip helps hold an item in place and reduces the chance of slipping. Measure the handle first because this product's narrow diameter range is its main buying limit.
Choose ROBLOCK when the goal is quick access and repeat storage. It is not the right shape for joining long pipes in a woodworking glue-up or suspending stage equipment.
For that glue-up, compare three-quarter-inch woodworking pipe clamps.
Eyeshot for large pipe ranges and high stated capacity
Eyeshot Truss Clamp Stage Lights Clamps Black: Best for high-load truss mounting
- 4 aluminum alloy 6061 clamps
- Fits 1.57 to 2.36 in pipe OD
- 330 lb stated maximum
- 10 mm threaded bolt
The Eyeshot set targets stage and truss work where a broad pipe range and high stated capacity matter. Anti-skid teeth, an adjustable knob and quick installation support repeated fixture changes.
Pros
- Broad pipe range
- 4-piece set
- Quick installation and removal
Cons
- Designed around truss and lighting use
- Confirm the actual load before use
Eyeshot is the strongest match for truss or pipe mounting when you need a 40 to 60 mm outside diameter range. Its 4-piece set uses aluminum alloy 6061 and includes a 10 mm threaded bolt for compatible fixtures.
The clamp has precision anti-skid teeth and an adjustable knob. Those details support repeated installation and removal, including horizontal or vertical hanging, but the actual load must still be checked before use.
The stated maximum is 330 lb, while another data point gives a 110 lb or 50 kg load capacity. Because those figures differ, use the lower confirmed limit for planning until the exact setup and manufacturer guidance clarify the difference.
The product is aimed at moving head, PAR LED and other stage or DJ lighting fixtures. Its 4-piece format makes it useful when several fixtures need the same style of clamp.
Choose Eyeshot when pipe fit, quick removal and a large stated capacity are more important than a compact storage design. Inspect the teeth, threaded hardware and pipe contact points before each suspended setup.
GRIFITI for phones, lightweight cameras and stands
GRIFITI Nootle Quick Release Pipe Clamp: Best for phone and camera mounting
- Fits pipes up to 1.5 in
- 1.5 in wide jaws
- 360-degree rotating ratchet head
- Two 1/4-20 female connectors
GRIFITI combines a quick-release pipe clamp with a phone mount for tripods, stands, handlebars and other compatible supports. It is the most task-specific pick here for positioning a phone or lightweight camera.
Pros
- Phone mount included
- 360-degree rotating head
- Anti-slip rubber pads
Cons
- Not intended for heavy pipe loads
- Best fit is limited to pipes up to 1.5 in
GRIFITI is the best fit for a phone or lightweight camera that needs to move between a pipe, tripod, music stand, microphone stand or handlebar. Its quick-release clamp works with pipes up to 1.5 in in diameter and has 1.5 in wide jaws.
The full metal construction gives the mount a different role from the rubber storage products. Its 360-degree rotating ratchet head lets you change the viewing angle, while the knob lock secures the selected position.
Two 1/4-20 female connectors expand the mounting options. They work with compatible Nootle parts and other supports that use the same 1/4-20 threaded standard.
Rubber pads help grip the phone and reduce scratches. The phone mount has adjustable arms, and the product is described as compatible with smartphones including iPhone, Galaxy, HTC and Nokia models.
Choose GRIFITI when quick release means moving a phone or camera between supports. It is not a high-load pipe clamp, so use it for lightweight mounting tasks rather than suspended equipment.
JIANXIAOGUO for hydraulic quick-coupler service
JIANXIAOGUO 18” Quick Coupler Mate Pipe Clamps: Best for hydraulic quick couplers
- 18 in hand clamp
- 4 duo-jaw sets
- High carbon steel
- Jaws for 1/2, 3/4, 7/8 and 3/8 in sizes
This hand clamp is made for replacing hydraulic heavy equipment quick couplers on equipment such as excavators and tractors. The interchangeable jaw sizes make it more useful when your work involves several stated coupler dimensions.
Pros
- 18 in handle
- 4 included duo-jaw sets
- 2-year quality assurance
Cons
- Does not fit Kubota
- Not a general woodworking pipe clamp
JIANXIAOGUO is the specialist pick for replacing hydraulic heavy equipment quick couplers on excavators, tractors and similar equipment. Its 18 in hand clamp uses high carbon steel and comes with 4 duo-jaw sets.
The included jaws cover 1/2 and 3/4 in sizes, plus 7/8 and 3/8 in sizes. That range helps when your service work involves more than one coupler dimension, but you must check the jaw style before ordering.
The quick-coupler design is intended to save effort during replacement work. It is especially aimed at equipment service in cold conditions, where working with a fixed or awkward connection can take more time.
JIANXIAOGUO includes 2 years of quality assurance. The product specifically does not fit Kubota, so confirm the machine and jaw requirements before you choose it.
Choose this clamp for hydraulic service work, not general workshop clamping. Its 18 in handle and specialized jaw sets make it a poor substitute for standard pipe clamp heads.
jindaaudio for three common stage pipe sizes
jindaaudio Stage Lighting Truss Clamp: Best for three pipe diameters
- Fits 1, 1.5 and 2 in pipe diameters
- 2-pack
- Fiberglass construction
- 33 lb maximum stated capacity
The jindaaudio clamp is useful when a lighting setup may use one of three common pipe diameters. Its 2-pack and hook-and-clamp design suit mobile or permanent stage arrangements.
Pros
- Three stated pipe sizes
- 2-pack
- Compact 4.29 x 3.38 in size
Cons
- Lower stated capacity than the heavy-duty truss picks
- Stage-lighting focus
jindaaudio is useful when your stage setup may use 25, 38 or 50 mm pipe. The O-clamp design covers 1, 1.5 and 2 in diameters, giving it a wider size choice than the Douzime models in this group.
The 2-pack uses fiberglass construction and a black finish. Its hook-and-clamp mechanism is designed for stage lighting and truss systems, with quick setup for permanent or mobile arrangements.
The stated maximum capacity is 33 lb or 15 kg. That is much lower than the Eyeshot and Douzime figures, so use jindaaudio for fixtures within that limit and do not compare the numbers without considering the different designs and use cases.
The compact size, about 4.29 x 3.38 in, can help when space around a lighting rig is limited. Still, measure the pipe because the three compatible sizes do not mean every diameter between them will fit.
Choose jindaaudio when flexibility across three pipe diameters matters. Choose Eyeshot or Douzime when your equipment needs a higher stated load capacity.
Douzime single clamp for 32 to 35 mm truss
Douzime Stage Light Clamp Hook Mount: Best for 32 to 35 mm truss
- Fits 32 to 35 mm pipe OD
- Aluminum alloy 6061
- 165 lb maximum stated capacity
- Quick release and quick lock
This single Douzime hook mount fits a narrow 32 to 35 mm truss range and offers a high stated load limit. It makes sense when your pipe size is known and you need one replacement or extra mounting point.
Pros
- High stated capacity
- Quick-release design
- 10 mm threaded bolt
Cons
- Only 1 clamp
- Narrower fit range than several picks
The single Douzime hook mount is a good fit when you know your truss measures 32 to 35 mm outside diameter and need one quick-release mounting point. It uses aluminum alloy 6061 and a 10 mm threaded bolt.
Its stated maximum weight limit is 165 lb, which gives it more capacity than the jindaaudio option. The narrow fit range is the trade-off, so do not choose it without measuring the pipe.
The design supports quick release and quick lock operation. That makes it useful for stage, DJ, bar, pub, event, theater and disco setups where fixtures may be changed or removed between sessions.
The clamp is sold as 1 unit. That is helpful for replacing one missing mount, but a pair or larger set may be more efficient when you are building a new rig.
Choose this model when one clamp solves the job and your pipe falls within the stated range. If you need two matching mounts, compare the 2-piece Douzime option below.
Douzime 2-piece set for matching truss mounts
Douzime 2 Pcs DJ Stage Lighting Truss: Best for a matching pair
- 2 aluminum clamps
- Fits 32 to 35 mm pipe OD
- 165 lb maximum stated capacity
- TUV specification
This Douzime pair gives you two clamps for the same 32 to 35 mm truss range as the single-unit option. Choose it when both sides of a fixture need matching quick-release mounts.
Pros
- 2-piece set
- Quick release and quick lock
- 2-year manufacturer warranty
Cons
- Narrow pipe range
- Lower score than the single-unit version
The 2-piece Douzime set suits a fixture that needs two matching clamps for 32 to 35 mm outside diameter pipe. It uses aluminum and has the same stated 165 lb maximum weight limit as the single-unit version.
The quick-release and quick-lock design supports repeated stage and DJ setup work. Its 10 mm TUV-certified threaded bolt is intended for compatible lighting fixtures and truss mounting.
The set is silver with a polished finish, and each clamp measures 4 x 2.6 x 1.2 in. Its round form and aluminum shade material fit the stated truss-mount design.
Douzime provides a 2-year manufacturer warranty. As with the single clamp, the main limitation is the narrow 32 to 35 mm pipe range.
Choose this set when you need two points of attachment and your truss is already measured. Choose the single Douzime when you only need one replacement or extra clamp.
What should you check before buying quick release clamps for pipes?
The first check is outside diameter, followed by the load and the mounting hardware. A quick-release mechanism cannot correct a pipe that is too large, too small or shaped differently from the clamp's intended use.
Match the outside diameter
Pipe names can be confusing because nominal sizes do not always equal outside measurements. Measure the pipe with a tape or caliper, then compare that number with the clamp's stated range.
Eyeshot covers 40 to 60 mm. The Douzime models cover 32 to 35 mm.
GRIFITI works with pipes up to 1.5 in, while ROBLOCK fits handles from 0.8 to 1.2 in.
If you are building a woodworking setup, read what pipe should you use for pipe clamps before choosing a clamp head or pipe. The right combination must fit both the clamp and the work.
Match the task, not just the load number
A high capacity does not make a stage truss clamp suitable for a glue-up. Stage clamps are shaped around fixture mounting, while the JIANXIAOGUO tool is shaped around hydraulic quick-coupler service.
For woodworking, learn how to use pipe clamps so the clamp, pipe, workpieces and pressure points work together. For mounting equipment, check the fixture thread, pipe position and load path.
Check the release method
Quick release can mean a lever, knob, hook or adjustable jaw. ROBLOCK lets you adjust tension without tools, GRIFITI uses a quick-release adjustor, and the Douzime models use quick release and quick lock.
A mechanism that is fast to open is useful only if it also locks securely. Before adding a load, make sure the clamp is fully seated and the release part cannot move unintentionally.
Consider whether you need one or several clamps
ROBLOCK, Eyeshot and jindaaudio offer multiple clamps for repeated mounting or storage tasks. The single Douzime is better when you need one replacement, while the 2-piece Douzime helps with matching two-point mounting.
If you are choosing between woodworking clamp types, compare pipe clamp vs bar clamp because the pipe, jaw depth and workpiece shape can change which style is easier to use.
Are these quick release pipe clamps good for workshops?
The ROBLOCK and GRIFITI are the easiest workshop-adjacent choices, but neither replaces a dedicated woodworking pipe clamp. ROBLOCK handles small storage items, while GRIFITI handles phones, lightweight cameras and compatible stands.
The Eyeshot, jindaaudio and Douzime products are primarily stage or truss hardware. They may help in a workshop only when the pipe fit, mounting method and load match the job.
The JIANXIAOGUO clamp belongs in hydraulic service work. Its specialized jaws and 18 in handle are useful for quick-coupler replacement but do not make it a general bench clamp.
For a saw setup, use a clamp designed for the saw and workpiece rather than adapting unrelated hardware. Even a question such as How To Release Miter Saw? involves a different mechanism from a quick-release pipe clamp, and the Best Miter Saw Clamp guide is a better place to compare that tool.
Final verdict on the best quick release pipe clamps
The best quick release pipe clamps depend on the pipe diameter and the work. Pick ROBLOCK for small handles and storage, Eyeshot for broad truss fit and high stated capacity, GRIFITI for phone or lightweight camera mounting, and JIANXIAOGUO for hydraulic quick-coupler service.
Start with the pipe. Measure the outside diameter and compare it with each range before you look at any other detail.
ROBLOCK fits handles from 0.8 to 1.2 in and supports 25 lb per clamp. That makes it a clear pick for garages, boats, RVs and ATVs when storage is the goal.
Eyeshot fits pipe from 40 to 60 mm and is aimed at stage fixtures. Its broad range helps when truss sizes vary across a setup.
GRIFITI fits pipes up to 1.5 in and adds a phone mount. It suits tripods, stands and handlebars where a phone or lightweight camera needs quick repositioning.
JIANXIAOGUO suits hydraulic quick coupler work on excavators, tractors and similar equipment. Its 18 in handle and jaw sets mark it as a service tool, not a bench clamp.
Choose jindaaudio when you need three stage pipe sizes in one clamp design. Its 25, 38 and 50 mm options plus a 2 pack suit mobile or permanent rigs.
Pick the single Douzime for one 32 to 35 mm mount, or the 2-piece Douzime when a matching pair matters. Both use the same stated capacity, so count decides the choice.
Check the load path before you commit. Confirm the fixture thread, pipe position and wear on pads or teeth, then lock the clamp and test it lightly.
Our top 3 picks at a glance
-
1
Best for small tool handles
ROBLOCK Quick Release Rubber Clamp Mounts
9.6/10 our score
See it on Amazon -
2
Best for high-load truss mounting
Eyeshot Truss Clamp Stage Lights Clamps Black
9.5/10 our score
See it on Amazon -
3
Best for phone and camera mounting
GRIFITI Nootle Quick Release Pipe Clamp
9.3/10 our score
See it on Amazon
Frequently asked questions
What are the best quick release pipe clamps for woodworking?
The best quick release pipe clamps for woodworking should match the pipe diameter, open quickly and hold the work without shifting. These picks are mainly storage, mounting, stage and hydraulic clamps, so check the intended use carefully before treating one as a woodworking substitute.
For standard woodworking assemblies, compare dedicated pipe clamp heads and compatible black pipe.
How do quick release pipe clamps work?
A quick release pipe clamp uses a lever, knob, hook or adjustable mechanism to secure and release an item faster than a fixed bracket. The exact motion differs by design.
Measure the pipe or handle first, then release the clamp, position it, and lock it without forcing the mechanism past its intended range.
What pipe size should I measure before buying?
Measure the outside diameter of the pipe, not just its nominal trade size. Eyeshot fits 40 to 60 mm outside diameter, while Douzime models fit 32 to 35 mm.
A small difference can prevent the clamp from closing correctly, so compare your measurement with the stated range before ordering.
Are stage truss clamps suitable for woodworking?
Stage truss clamps are designed around lighting and truss mounting, not ordinary woodworking glue-ups. They may have useful pipe ranges and quick-release mechanisms, but that does not make them interchangeable with woodworking pipe clamp heads.
Choose based on the load, jaw shape and intended use.
How should I use a quick release pipe clamp safely?
Keep the pipe within the clamp's stated size range, seat the jaws fully and confirm the lock is engaged before applying a load. For suspended equipment, follow the manufacturer's load guidance and inspect the clamp before each setup.
Never exceed the stated capacity or rely on a clamp that shows damage.
