9 Best Woodworking Clamp Sets (November 2026)
The best woodworking clamp sets include the JORGENSEN 4-Pack Steel 600LBS Bar Clamps Set for medium-duty glue-ups, the WETOLS 90 Degree Corner Clamp Set for 90-degree corners, and the HORUSDY 8-Pack Bar Clamps for Woodworking for variety in one box.
On this page (9 sections)
- Our best woodworking clamp set picks by job
- How the best woodworking clamp sets compare side by side
- How we compared these clamp sets
- What size openings should a woodworking clamp set include?
- How much clamping force do you need for glue-ups?
- What jaw type matters most in a clamp set?
- How many clamps should you buy in a set?
- How do you set up and care for clamps?
- Verdict: which woodworking clamp set should you buy?
The best woodworking clamp set for most shops is the JORGENSEN 4-Pack Steel 600LBS Bar Clamps Set, because its 6 in and 12 in steel F-clamps cover the openings you reach for first. A good woodworking clamp set should cover more than one job, since glue-ups, frames and small parts ask for different jaw shapes and pressure.
Start with woodworking clamps if you want the broader buying guide before you compare sets. Our best clamps for woodworking projects roundup covers single clamps by job, while this post focuses on sets you can build a bench around.
Our picks at a glance
-
1
Best for medium-duty glue-upsJORGENSEN 4-Pack Steel 600LBS Bar Clamps Set
9.6/10 our score
See it on Amazon -
2
-
3
Best for variety in one boxHORUSDY 8-Pack Bar Clamps for Woodworking
9.6/10 our score
See it on Amazon
- 4
Check itIRWIN QUICK-GRIP Clamps for Woodworking
Best for one-handed small work - 5
Check itEQUIPTZ Spring Clamps for Woodworking
Best for light holding in bulk - 6
Check itSHALL 12-Inch Steel Bar Clamps Set
Best for 12-inch steel F-clamps - 7
Check itEQUIPTZ 6 Pack Bar Clamps for Woodworking
Best for 6 in and 12 in quick clamps - 8
Best for small bar and spring combosCheck it - 9
Check itBESSEY GSCC4PK-C Clamp Set for Woodworking
Best for F-style clamps with wood handles
Our best woodworking clamp set picks by job
The JORGENSEN set leads for medium-duty glue-ups, HORUSDY leads for variety, and WETOLS leads for corners. The rest split by one-handed use, bulk spring holding and 12 in steel reach.
Our score weighs specs, features and buyer feedback against what you are shopping for.
JORGENSEN 4-Pack Steel 600LBS Bar Clamps Set: Best for medium-duty glue-ups
- 6 in and 12 in F-clamps
- 600 lb load limit
- 2-1/2 in throat depth
- Sliding head with multi-disc clutch
- Steel bar with soft plastic pads
Four steel F-clamps in two useful lengths, built for hobbyists, carpenters and woodworkers who need steady pressure on medium-duty work.
Pros
- 6 in and 12 in sizes in one set
- 600 lb load limit
- Sliding head holds along the bar
- Soft pads protect wood
Cons
- Only four clamps
- 13 in throat reach is shallow for deep panels
JORGENSEN suits hobbyists, carpenters and woodworkers who do medium-duty clamping often. This 4-pack mixes two 6 in and two 12 in F-clamps, so you can hold a small box and a wider panel without changing sets.
The 6 in clamps suit drawers and tight assemblies, while the 12 in clamps cover frames and wider boards.
The steel bar is plated to resist rust, and the castings carry an orange baked enamel finish. Soft plastic pads spread pressure and reduce marks on the wood you are gluing, which matters on faces that will show in the finished piece.
The sliding head uses a multi-disc clutch with hardened plated steel discs and one spring. That design holds the head at any point along the bar, so you can set the opening close to the work.
The threaded screw uses a large easy-grip handle with a swivel pad, and the 2-1/2 in throat depth tells you how deep the jaw can reach into a panel.
The 600 lb load limit suits glue-ups where you need firm closing pressure, not just holding a part in place. Trade-off: you get four clamps, not eight or twenty.
If you glue large panels, four may mean reusing clamps across joints. For focused medium work, that trade is often worth it.
WETOLS 90 Degree Corner Clamp Set: Best for 90-degree corners
- 4 pcs corner clamps
- Fits boards 3/16 in to 3/4 in thick
- 90-degree corners and T-joints
- Polyamide body
- Strong flexible spring
- One-hand operation
Four corner clamps that hold boards at 90 degrees for frames, boxes and cabinet work, using spring tension for one-hand use.
Pros
- Holds 90-degree corners and T-joints
- One-hand operation
- Fits 3/16 in to 3/4 in boards
- Lightweight polyamide body
Cons
- Limited to thin boards
- Not a replacement for bar clamps on large glue-ups
WETOLS suits DIY woodworking, cabinet making, box assembly and picture frames. These four corner clamps hold boards at 90 degrees, including T-joints, so you can align a frame with one hand free.
That free hand can hold a driver, a brush or a straightedge while the clamp keeps the corner square.
The clamps fit boards from 3/16 in to 3/4 in thick. That range covers thin frame stock and small box sides, but it will not fit thicker panel stock.
Check your stock thickness before you plan a cabinet carcass or a large frame around this set.
The body is polyamide, and a strong flexible spring keeps tension on the boards while you screw or glue them. The lightweight design and 5.5 in size support single-handed operation, which helps when the other hand holds a driver or a brush.
Spring tension also means you can set several corners, then check them before final fastening.
Use these for alignment and holding during assembly. They do not provide the closing pressure of a bar clamp, so plan to follow with bar clamps for a glued joint.
Trade-off: this is a specialized set. Buy it as a partner for bar clamps, not as your only clamp set, unless your work is mostly small frames and boxes.
HORUSDY 8-Pack Bar Clamps for Woodworking: Best for variety in one box
- 4 pcs 6 in bar clamps
- 2 pcs 12 in bar clamps
- 2 pcs 6 in spring clamps
- 150 lb load limit
- Nylon body with hardened steel bar
- Quick-change spreader function
Eight clamps across bar and spring types, with a quick-change design that lets bar clamps work as spreaders.
Pros
- Bar and spring clamps together
- 6 in and 12 in sizes
- Converts to a spreader
- 150 lb load limit
Cons
- Lower load limit than steel F-clamps
- Spring clamps suit light holding only
HORUSDY suits buyers who want one box to cover several jobs. The set includes four 6 in bar clamps, two 12 in bar clamps and two 6 in spring clamps, so you can move from a glue-up to light holding without a second purchase.
That mix suits a bench where boxes, trim and small repairs share the same day.
The 6 in clamps work as spreaders up to 11-9/64 in, and the 12 in clamps spread up to 17-21/64 in. A quick-change button lets you remove the jaws, reverse them and lock them back in place.
Spreader use helps when you need to push parts apart for fitting, rather than pull them together for glue.
The body is nylon, and the bar is hardened steel. That mix keeps the clamps light while giving the bar impact resistance for frequent site use.
The ergonomic handle supports longer sessions, and the pads use a flexible material with a non-slip texture, which helps grip during use.
The load limit is 150 lb, with a metal ratchet construction and quick release. Trade-off: 150 lb is well below the 600 lb steel F-clamps here.
Choose HORUSDY for range and spreader use, and choose steel F-clamps when you need higher closing pressure.
IRWIN QUICK-GRIP Clamps for Woodworking: Best for one-handed small work
- 8 piece set
- Quick-release triggers
- 6 in mini bar clamps
- 12 in mini bar clamps
- 2 in Handi-Clamps
- 2 in resin spring clamps
- Reinforced resin construction
Eight quick-release clamps from 2 in Handi-Clamps to 12 in mini bar clamps, meant for fast positioning on small projects.
Pros
- One-handed trigger release
- Wide size range in one set
- Lightweight resin bodies
- Spring and bar types included
Cons
- Resin bodies are not steel F-clamps
- Mini bar clamps suit smaller work
IRWIN suits small projects where speed matters more than heavy pressure. This 8-piece set mixes mini bar clamps, Handi-Clamps and spring clamps, so you can grab the right size without sorting through a large rack.
The mix suits crafts, small boxes and light assembly on a compact bench.
The set includes two 12 in mini one-handed bar clamps, two 6 in mini bar clamps, two 2 in Handi-Clamps and two 2 in resin spring clamps. That spread covers very small parts with the 2 in sizes, and medium light work with the 12 in size.
Having both spring and bar types lets you choose squeeze speed or ratchet pressure.
Quick-release triggers let you slide the clamp into position and squeeze with one hand. IRWIN states up to 150 psi of clamping pressure for the mini bar clamps.
That figure is a pressure rating for the mini design, so treat these clamps as light-duty tools for small joints rather than panel glue-ups.
The bodies use high-tech reinforced resin, which keeps the set light at 16 oz in total weight. Resin is easy to handle for small work, but it is not steel for heavy glue-ups.
Trade-off: you get variety and one-handed speed, but not the force or throat depth of steel F-clamps. Pair this set with a steel set if you do both crafts and furniture work.
EQUIPTZ Spring Clamps for Woodworking: Best for light holding in bulk
- 20-pack spring clamp set
- 4 pcs 6 in clamps
- 6 pcs 4 in clamps
- 10 pcs 3 in clamps
- Extra wide non-detachable jaw pads
- Plastic body with coated manganese steel spring
- Soft rubber handles
Twenty spring clamps in three sizes for crafts, backdrops, covers and light woodworking holding, with wide jaw pads.
Pros
- 20 clamps in three sizes
- Wide jaw pads
- Soft rubber handles
- Non-detachable pads
Cons
- Spring force suits light work
- Not for glue-up pressure
EQUIPTZ suits crafts, backdrops, pool covers and light woodworking holding. This 20-pack gives you 3 in, 4 in and 6 in spring clamps, so you can hold tarps, covers and small parts in bulk.
The counts split across sizes, with multiple clamps in each length for jobs that need several holding points at once.
Jaw pads are extra wide and non-detachable, with a groove design that holds workpieces in place. Soft rubber handles add grip and cushion for repeated squeezing.
Non-detachable pads matter in daily use, since loose pads can slow a job and leave marks if they shift.
The body is premium plastic, and the spring uses anti-rust electrophoretic coated manganese steel. That build suits heavy-duty light holding, such as keeping a cover down in wind or holding a backdrop during a shoot.
The clamps come in a sturdy box, which helps keep sizes sorted between jobs.
Spring clamps work by squeeze, not by screw pressure. They are fast to apply and remove, which makes them handy for holding a part while you mark, drill or glue.
Trade-off: spring force will not close a glued joint like a bar clamp. Buy this set for volume and speed, and keep bar clamps for glue-ups where pressure matters.
SHALL 12-Inch Steel Bar Clamps Set: Best for 12-inch steel F-clamps
- 4-pack 12 in steel bar clamps
- 600 lb load limit
- 2-1/2 in throat depth
- 1/4 in hardened steel bar
- Quick-release latches
- Grooved bar for grip
- Soft plastic jaw pads
Four 12 in steel F-clamps with a 600 lb load limit, quick-release latches and soft jaw pads for wood and metal work.
Pros
- 600 lb load limit
- All four clamps are 12 in
- 2-1/2 in throat depth
- Quick-release latches
Cons
- No 12 in clamps in the set
- Four clamps only
SHALL suits woodworking and metalworking where 12 in steel F-clamps do most of the work. All four clamps are 12 in with a 2-1/2 in throat depth and a 600 lb load limit, so the set is focused rather than mixed.
That focus suits panels, frames and furniture parts that sit near the full opening.
The bar uses 1/4 in thicker hardened steel construction for impact resistance. Dual-sided precision grooves on the bar help the clamp arm grip and reduce abnormal sliding.
A grooved bar also helps the sliding head stay put when you set the opening before you turn the screw.
Quick-release latches let you adjust and lock the clamps quickly. An ergonomic rubber handle with an anti-slip textured grip makes twisting more comfortable during longer work.
Comfort matters when you tighten several clamps in sequence on a wide glue-up.
Soft plastic removable jaw pads distribute pressure evenly and reduce damage to the contact surface. That matters on finished wood, where bare steel can leave marks, and on metalwork where pads keep the jaw from marring the surface.
Trade-off: there are no 6 in clamps, so small work means using a larger clamp. If your bench work centers on 12 in panels and frames, this focus is a plus.
EQUIPTZ 6 Pack Bar Clamps for Woodworking: Best for 6 in and 12 in quick clamps
- 2 pcs 12 in bar clamps
- 4 pcs 6 in bar clamps
- 150 lb clamping force
- One-handed trigger release
- Reinforced nylon and hardened steel
- Converts from F clamp to spreader
- Padded jaws
Six quick-grip bar clamps in 6 in and 12 in sizes, with trigger release, padded jaws and a spreader conversion.
Pros
- 6 in and 12 in combo
- One-handed trigger release
- Converts to a spreader
- Padded jaws protect work
Cons
- 150 lb force is below steel F-clamps
- Six clamps, not a bulk set
EQUIPTZ suits carpentry, DIY and metalworking where one-handed bar clamps get daily use. This 6-pack includes four 6 in and two 12 in bar clamps, which covers small parts and medium panels.
Four 6 in clamps give you enough for a small box, while two 12 in clamps reach wider boards.
The clamps provide up to 150 lb of clamping force. Trigger release lets you adjust and reposition with one hand, which speeds up assembly when the other hand holds a board.
One-handed use also helps when you work alone and cannot ask for a second pair of hands.
The build uses reinforced nylon and hardened steel, which resists flexing and breaking during repeated use. Padded jaws protect the workpiece while giving a secure grip.
The ergonomic grip supports extended use, so you can clamp, adjust and release without hand fatigue slowing the job.
The design converts from an F clamp to a spreader clamp. That conversion helps when you need to hold pieces apart for fitting or repair work, such as opening a joint slightly before glue or fasteners go in.
Trade-off: 150 lb is a light-to-medium force, so this set does not replace 600 lb steel F-clamps for larger glue-ups. Choose it for speed and size mix, and add steel clamps for heavy closing jobs.
HORUSDY 8-Pack Bar Clamp Set: Best for small bar and spring combos
- 4 pcs 6 in bar clamps
- 4 pcs 4 in spring clamps
- 75 lb load limit
- Nylon body with hardened steel bar
- Quick-change spreader function
- Non-slip pads
Eight small clamps that mix 6 in bar clamps with 4 in spring clamps for light woodworking and home repairs.
Pros
- Bar and spring types together
- Lightweight nylon bodies
- Converts to a spreader
- Non-slip pads
Cons
- 75 lb load limit
- No 12 in bar clamps
HORUSDY suits light woodworking and home repairs where small clamps do most of the holding. This 8-pack mixes four 6 in bar clamps with four 4 in spring clamps, so you can switch between bar pressure and spring speed.
That mix suits trim, small boxes and repair work on a home bench.
The 6 in bar clamps work as spreaders up to 9.72 in. A quick-release button lets you push, remove and reverse the jaws, then lock them back in place for spreader use.
Spreader range at this size helps with small cabinets and boxes where you need to push sides apart for fitting.
The load limit is 75 lb, which is light compared with other bar clamps here. That limit suits small boxes, trim and repair work, not large panel glue-ups.
Plan to use these clamps for holding and light closing, and move to a higher-rated set for wide panels.
The bodies are nylon, and the bars are hardened steel for impact resistance. Non-slip pads add grip, and the quick-release mechanism keeps workflow moving.
The set is compact at 10.23 x 4.33 x 2 in, so it stores easily in a small shop. Trade-off: you get eight clamps at a low force rating.
Buy it for small jobs and spreader range, and choose a 150 lb or 600 lb set when the joint needs more closing pressure.
BESSEY GSCC4PK-C Clamp Set for Woodworking: Best for F-style clamps with wood handles
- 2 x 6 in and 2 x 12 in F-style clamps
- 600 lb rating
- Ergonomic wooden handles
- Serrated rail
- Powder-coated cast-iron jaws
- Replaceable pads
Four F-style clamps in 6 in and 12 in sizes, with wooden handles, serrated rails and cast-iron jaws for medium-duty work.
Pros
- 6 in and 12 in sizes
- 600 lb rating
- Wooden handles
- Replaceable pads
Cons
- Four clamps only
- F-style design needs screw tightening
BESSEY suits medium-duty work where F-style screw clamps are preferred. This 4-pack includes two 6 in and two 12 in clamps, with a 600 lb rating for wood and metal work.
The two sizes cover small assemblies and wider frames without a mixed set of other clamp types.
The clamps use a serrated rail with sturdy cast-iron jaws. Powder-coated cast-iron fixed and sliding jaws give the clamps a durable build for repeated use.
A serrated rail helps the sliding jaw bite and hold its position along the bar while you tighten the screw.
Ergonomic wooden handles make screw tightening more comfortable than a bare metal handle. Wood also stays cooler in the hand and gives a firm grip during long glue-ups.
Replaceable pads help protect work and can be renewed when they wear, which extends the life of the set on finished surfaces.
F-style clamps need screw tightening, so they are slower than trigger clamps for quick holding. They reward you with steady, controllable pressure for glue-ups, since you can add force gradually and check alignment as you go.
Trade-off: four clamps and screw-only tightening limit speed and count. Choose BESSEY for traditional F-clamp control, and choose trigger sets when one-handed speed matters most.
How the best woodworking clamp sets compare side by side
The table below puts load limit, opening and count in one place. Use it to match force and size to the work you do most.
| Product | Best for | Count | Opening | Load limit | Our score |
|---|---|---|---|---|---|
| JORGENSEN 4-Pack Steel 600LBS Bar Clamps Set | medium-duty glue-ups | 4 | 6 in and 12 in | 600 lb | 9.6 |
| WETOLS 90 Degree Corner Clamp Set | 90-degree corners | 4 | 9.6 | ||
| HORUSDY 8-Pack Bar Clamps for Woodworking | variety in one box | 8 | 6 in and 12 in bar clamps | 150 lb | 9.6 |
| IRWIN QUICK-GRIP Clamps for Woodworking | one-handed small work | 8 | 2 in, 6 in and 12 in | 150 psi clamping pressure | 9.5 |
| EQUIPTZ Spring Clamps for Woodworking | light holding in bulk | 20 | 3 in, 4 in and 6 in | 9.3 | |
| SHALL 12-Inch Steel Bar Clamps Set | 12-inch steel F-clamps | 4 | 12 in | 600 lb | 9.2 |
| EQUIPTZ 6 Pack Bar Clamps for Woodworking | 6 in and 12 in quick clamps | 6 | 6 in and 12 in | 150 lb | 9.0 |
| HORUSDY 8-Pack Bar Clamp Set | small bar and spring combos | 8 | 6 in bar clamps and 4 in spring clamps | 75 lb | 8.4 |
| BESSEY GSCC4PK-C Clamp Set for Woodworking | F-style clamps with wood handles | 4 | 6 in and 12 in | 600 lb | 8.3 |
How to read load limit and opening together
Load limit tells you the pressure a clamp is rated to handle, and opening tells you the largest gap it can span. A 600 lb clamp with a 6 in opening and a 150 lb clamp with a 12 in opening solve different problems.
Match both numbers to the joint in front of you, not to the largest job you might do someday.
Throat depth also matters, even when the opening looks large enough. A 2-1/2 in throat depth limits how deep the jaw can reach into a panel or frame.
If the jaw cannot reach the joint, a clamp with a longer opening will still fail on that work.
How we compared these clamp sets
We compared specs, features and buyer feedback against the jobs a clamp set should cover. We looked at opening size, throat depth, load limit, jaw pads, spreader conversion and clamps per set.
We checked each title and spec list for facts we could state plainly. We did not invent sizes, materials or included parts.
Where a brand states a load limit, we used that figure and labeled it as the brand's rating.
We weighed variety against force. A set with eight clamps at 75 lb serves different work than four steel clamps at 600 lb.
Scores reflect fit for a general woodworking bench, not a single best clamp for every task.
For storage, our best woodworking clamp rack guide helps you keep a growing set off the bench. A rack also makes it easier to see which sizes you own before you buy more.
Why count and jaw type changed the ranking
Count alone did not decide the order. A 20-pack of spring clamps ranks for light holding, while a 4-pack of steel F-clamps ranks for glue-ups.
We placed jaw type beside count, since a spring clamp and a bar clamp do different work even at the same opening size.
Spreader conversion also mattered for mixed sets. A clamp that reverses into a spreader covers fitting work that a fixed clamp cannot do.
We gave credit for that range, but we did not let it outweigh load limit on glue-up work.
What size openings should a woodworking clamp set include?
A set with 6 in and 12 in openings covers most bench work. The 6 in size suits boxes, small frames and tight spaces, while 12 in reaches wider panels.
6 inch clamps for small work
Six-inch bar clamps fit small drawers, boxes and repair work. They also reach into assemblies where a 12 in clamp would hit a nearby part.
12 inch clamps for panels and frames
Twelve-inch clamps handle wider glue-ups and frame assemblies. Check throat depth too, since a 2-1/2 in throat limits how deep into a panel the jaw can reach.
Spring clamps for fast holding
Spring clamps in 3 in, 4 in and 6 in sizes hold light parts fast. They suit crafts and prep work, but they do not close glued joints with bar-clamp pressure.
How much clamping force do you need for glue-ups?
Glue-ups need more force than holding work. Steel F-clamps here carry a 600 lb load limit, while quick bar clamps carry 150 lb or 75 lb.
600 lb steel F-clamps
Steel F-clamps with a 600 lb limit suit medium-duty glue-ups on panels, frames and furniture parts. They need screw tightening, so plan a little more time per clamp.
150 lb quick bar clamps
Quick bar clamps at 150 lb suit light glue-ups and one-handed assembly. They are faster to position, but they give less closing pressure for larger joints.
75 lb small sets
Sets rated at 75 lb suit small boxes and repairs. Use them for holding and light closing, and move to a higher-rated set for wide panels.
What jaw type matters most in a clamp set?
Jaw type decides how you apply pressure. F-clamps use a screw, trigger clamps use a ratchet, spring clamps use squeeze, and corner clamps hold a fixed angle.
F-clamps for steady screw pressure
F-clamps give controlled pressure and hold well on glue-ups. Look for soft or replaceable pads to protect wood, and a large handle for comfortable tightening.
Trigger clamps for one-handed use
Trigger clamps slide into place and squeeze fast. They suit assembly where one hand must hold the work, and many convert to spreaders for fitting work.
Corner clamps for frames and boxes
Corner clamps hold 90-degree joints while you glue or fasten. They work best with thin stock, so check the thickness range before you buy.
How many clamps should you buy in a set?
More clamps help when a glue-up has many joints. Four clamps can hold a small box, while eight or more let you clamp both sides at once.
Four-clamp steel sets
Four steel F-clamps suit focused medium work. They give high force per clamp, but you may need to reuse them across joints on larger projects.
Eight-clamp mixed sets
Eight-clamp sets mix bar and spring types. That mix covers more jobs, but each clamp may have a lower force rating than a steel-only set.
Bulk spring clamp sets
Twenty spring clamps suit crafts and light holding in volume. They are cheap per clamp and fast to use, but they do not replace bar clamps for glue-ups.
If small parts are your main work, our best small clamps for woodworking guide covers smaller sizes in more depth. For screw-clamp force, best c clamps for woodworking compares that style on its own.
How do you set up and care for clamps?
Keep pads in place, wipe steel bars dry and store clamps where jaws will not bend. A rack keeps sets sorted by size and ready to grab.
Before a glue-up, dry-fit the parts and set pads to protect faces. Check that the clamp opening gives room for the work plus pads, so you do not run out of screw travel.
After use, brush off glue and wipe bars clean. Store steel F-clamps with screws backed off, so the next use starts with full travel.
For miter and trim work, the Best Miter Saw Clamp covers holding stock at the saw. Learn the steps in How To Use Miter Saw Clamp? before you clamp near a blade.
Verdict: which woodworking clamp set should you buy?
Pick the JORGENSEN 4-Pack Steel 600LBS Bar Clamps Set for medium-duty glue-ups, since its 6 in and 12 in steel F-clamps give the most useful force in this group. Pick HORUSDY's 8-pack if you want bar and spring variety with spreader use.
Pick WETOLS if your work is mostly 90-degree frames and boxes. Pick EQUIPTZ spring clamps if you need bulk light holding.
Build your bench around the force and sizes you reach for most. Then add corner clamps, spring clamps or small trigger clamps to cover the jobs your main set does not.
For the wider buying picture, start with woodworking clamps and keep your set sorted with a best woodworking clamp rack.
Our top 3 picks at a glance
-
1
Best for medium-duty glue-upsJORGENSEN 4-Pack Steel 600LBS Bar Clamps Set
9.6/10 our score
See it on Amazon -
2
-
3
Best for variety in one boxHORUSDY 8-Pack Bar Clamps for Woodworking
9.6/10 our score
See it on Amazon
Frequently asked questions
What should a woodworking clamp set include?
A useful set mixes bar clamps for glue-ups, spring clamps for light holding and corner clamps for frames. Look for 6 in and 12 in openings, jaw pads that protect wood and enough clamps to hold both sides of a joint at once.
How much clamping force do you need?
Light spring clamps are fine for holding parts during light work. For glue-ups, choose bar or F-clamps with a stated load limit such as 150 lb or 600 lb, and match that limit to the size and material of the joint you are closing.
Are corner clamps a substitute for bar clamps?
No. Corner clamps hold thin boards at 90 degrees while you glue, screw or nail a frame.
Bar clamps provide the closing pressure for that joint, so many shops use both types together on boxes and cabinets.
About this guide: Our look at woodworking clamp sets draws on maker specs, materials and what owners report. See how we research.



