Buying guide

How to Choose a Router Table for a Bosch Router

Updated on · By the Best Saw Guide team

A router table for Bosch router use should have a pre-drilled plate that matches your router base, enough top size for your work, and a fence tall enough for your stock. Check plate fit and height adjustment first, then dust collection and storage.

On this page (13 sections)
  1. What should a router table for a Bosch router match first?
  2. How does plate fit affect height adjustment?
  3. Should you pick a benchtop table or a cabinet style table?
  4. How tall should the fence be for your stock?
  5. What dust collection should a router table have?
  6. How large should the top be for your work?
  7. What router power should you mount in a table?
  8. How should you set up the table before the first cut?
  9. What safety steps matter for table routing?
  10. How do you maintain a router table between jobs?
  11. How should you choose between the Bosch RA1181 and RA1171?
  12. What mistakes should you avoid with a Bosch router table?
  13. Final checklist for a Bosch router table

The best router table for a Bosch router is one with a pre-drilled mounting plate that fits your base and a fence you can adjust from above the table. Start with plate fit, then check top size, fence height and dust ports.

That order matters because a table you cannot mount or adjust will not help you, no matter how large it is. A bench top router table for Bosch use should also match how you plan to store it between jobs.

We compared the Bosch RA1181 benchtop table and the Bosch RA1171 cabinet style table against the router power you may mount in them. We also included a router combo that shows what a table rated router should offer in speed control and base options.

Our score for each product weighs specs, features and buyer feedback against what you are shopping for. Read the fit checklist below before you choose a form factor.

What should a router table for a Bosch router match first?

A router table for Bosch router use should match your router's base pattern and mounting hardware first. For the same fit checks with a DeWalt, see router tables for DeWalt routers.

If the plate holes do not line up, you cannot use above-table height adjustment safely.

Bosch says both tables here use a rigid aluminum mounting plate pre-drilled for a variety of routers. That wording is broad, so you still need to confirm your exact model fits the pattern.

Measure the distance between base holes on your router before you buy. Compare that pattern with the plate diagram or the maker notes for the table you choose.

Also check whether your router uses a fixed base or a plunge base for table work. If router size is a concern, compare compact and plunge routers.

A fixed base is common for table mounting, while a plunge base gives you different depth control by hand.

If you are still deciding between router types, our wood routers for woodworking guide explains the main forms. That helps you pair the right router with the right table from the start.

Rule: buy only after you confirm plate fit for your exact router.

How does plate fit affect height adjustment?

Plate fit controls how you set bit height from above the table. A pre-drilled plate lets you bolt the router in and move it without removing it for every change.

The RA1181 plate is described as pre-drilled for compatibility and above-table height adjustment with many common routers. The RA1171 plate carries the same claim for a variety of routers.

That feature matters when you make small depth changes between test cuts. You can nudge height, test again and keep the fence and featherboards in place.

If a plate is not pre-drilled for your base, you may need to drill or adapt it. That adds work and can affect flatness if the holes are not true.

Check the included mounting hardware with each table. The RA1171 includes hardware for mounting routers, and the RA1181 includes mounting hardware for attaching to a workbench.

Rule: choose a plate you can adjust from above the table.

Should you pick a benchtop table or a cabinet style table?

Pick a benchtop table for portability and a large flat top, and pick a cabinet style table for storage and dust control. Both forms can hold a Bosch router, but they suit different shops.

The RA1181 is a benchtop table with a 27 x 18 in aluminum top and an overall size of 18 x 14.5 in in the specs. It weighs 30 lb, which makes it easier to move on and off a bench.

The RA1171 is a cabinet style table with a smooth laminated top. It weighs 35 lb and its cabinet form gives you storage and dust management below the top.

A benchtop form suits a small shop or a table you clamp to a workbench. A cabinet form suits a fixed shop corner where you route often and want a stable base.

If you want more portable options, see our best benchtop router table picks. They show how top size and weight trade off for moving a table.

Rule: choose the form you will keep set up and use.

Benchtop option: BOSCH RA1181 for portable work

The RA1181 suits you if you want a large aluminum top without a full cabinet. Its top is 27 in by 18 in, which supports long boards and wide panels.

Bosch includes mounting hardware for attaching it to a workbench. It also has a storage pocket for router accessories and a cord wrap that holds 6 ft of power cord.

The top is aluminum, which resists dings and stays flat for precision work. That matters when you run long stock past the fence and need a steady surface.

Cabinet option: BOSCH RA1171 for fixed shops

The RA1171 suits you if you route in one spot and want storage below. Its cabinet style design is built for stability, storage and dust management.

The top is laminated and smooth, which gives you a flat surface for stock. The base has four pre-drilled holes for screws and a flat extension for clamping to a workbench.

Choose this form if you value a dedicated dust path and a closed cabinet. Skip it if you need to carry your table between rooms often.

How tall should the fence be for your stock?

The fence should be tall enough to back your tallest stock with room to spare. A short fence cannot guide tall boards safely.

Both Bosch tables here have an extra tall aluminum fence. That helps when you route tall edge stock or stack cuts that need full support.

The RA1181 fence has adjustable faceplates and featherboards. The RA1171 fence also has adjustable MDF faceplates and featherboards.

Adjustable faceplates let you open a gap for the bit and close the rest of the face. That setup reduces tearout and keeps thin stock from tipping.

Featherboards add pressure from the table and fence to hold stock against the fence. They also help guard against kickback by keeping the work in contact.

Set the featherboards so they guide the stock without forcing it. Too much pressure can stall the cut or leave marks on the wood.

Rule: size the fence for the tallest stock you route.

What dust collection should a router table have?

A router table should have at least one port that fits your vacuum hose. Router dust is fine, and it can hide the cut line within minutes.

The RA1181 has a dedicated standard dust-collection port for 2-1/2 in vacuum hoses. That size fits many shop vacuums and dust collectors.

The RA1171 has two dedicated dust-collection ports. One port sits at the fence and one at the cabinet, which gives you more paths for dust.

A fence port helps capture dust near the bit, where most debris leaves the cut. A cabinet port helps clear dust that falls below the top.

Connect the hose before you make long cuts, and empty the collection container before it fills. A full container can reduce suction and let dust escape.

Wear eye and respiratory protection even with dust collection on. A port reduces dust, but it does not remove the need for a mask in a small shop.

Rule: buy a table with a port that fits your hose.

How large should the top be for your work?

The top should be large enough to support your longest board before and after the bit. Short tops make long cuts harder to keep straight.

For a saw-mounted option, see router table extensions.

The RA1181 top is 27 in by 18 in. That size gives you room for extended work on both sides of the bit.

A larger top also gives you room for featherboards, a miter gauge slot and outfeed support. The RA1181 has an accessory slot for featherboards and 3/4 in optional accessories such as a miter gauge.

The RA1171 specs list 24.2 in wide by 4.8 in high for the table unit. Its laminated top focuses more on a stable cabinet form than on a wide benchtop surface.

Measure your longest workpiece and mark where it will sit on the top. Add room for your hands and for the fence face.

Rule: size the top to your longest workpiece.

What router power should you mount in a table?

A table router should have enough power to hold speed under load. A 14 Amp motor with speed control is a useful baseline for table work.

The SKIL combo here is a 14 Amp, 2.5 HP router with both fixed and plunge bases. It has a speed control LCD display that lets you select bit type and material for suggested speed settings.

Bosch says the RA1181 and RA1171 plates work with many common routers for above-table adjustment. That means your current Bosch router may fit, but power and base type still matter.

Speed control matters because large bits and dense wood call for different speeds. Electronic feedback helps the motor maintain RPM, and soft start helps you begin a cut in a controlled way.

If you plan to use a compact router, read how to use bosch colt router first. A compact router can suit light trim work, but it is not the same as a full size table router.

Rule: mount a router with speed control and enough power for your bits.

How should you set up the table before the first cut?

Set up the table by leveling the top, mounting the router and squaring the fence. A rushed setup can cause uneven cuts even with a good table.

Mount the table to a workbench if the design allows it. The RA1181 includes hardware for attaching to a workbench, and the RA1171 has a flat extension for clamping.

Bolt the router to the plate and check that it sits flat with no rocking. A router that shifts under the plate will change depth during a cut.

Set the fence square to the top and parallel to the bit path. Use a test board to check the fence line before you cut good stock.

Install featherboards so they hold the stock firmly against the fence. Keep them ahead of the bit on the infeed side and behind the bit on the outfeed side where the design allows.

Connect the vacuum hose to the port and turn the vacuum on. Check that the fence faceplates leave only the gap you need for the bit.

Rule: test on scrap before you cut good wood.

What safety steps matter for table routing?

Table routing safety starts with keeping your hands clear and your stock guided. A router table is safer than hand routing for long cuts, but it still needs care.

Use featherboards to keep pressure on the stock and your hands away from the bit. Never reach over the bit to move a small piece by hand.

Use a starter pin and guard for curved workpieces. The RA1181 includes a starter pin and guard, and the RA1171 includes a starter pin, starter pin guard and an adjustable clear guard.

Feed stock in the correct direction for the bit and fence setup. If you are unsure, check your router manual and make a test cut on scrap.

Keep the work area clear of dust and offcuts. A clean top helps you see the cut and keeps stock from catching on debris.

Use the power-cord lock where provided. The RA1181 has a power-cord lock that helps prevent unauthorized use.

Rule: use featherboards and keep hands clear of the bit.

How do you maintain a router table between jobs?

Maintain the table by cleaning the top, checking the plate and inspecting the fence. A flat, clean top gives you repeatable cuts.

Brush dust from the top after each session and wipe the surface with a dry cloth. Pitch and glue can build up on laminated or aluminum tops over time.

Check the mounting plate for flatness and tight bolts. A loose router can shift height and ruin a set of matching parts.

Inspect the fence faceplates for nicks and wear. Replace or adjust them when they no longer give you a true face.

Empty dust containers and check hose connections often. A clogged port can let dust build up under the top and around the bit.

Store bits and accessories in the pockets or cabinet provided. The RA1181 has a storage pocket, and the RA1171 cabinet gives you enclosed storage.

Rule: clean and check the plate after every few jobs.

How should you choose between the Bosch RA1181 and RA1171?

Choose the RA1181 for a portable benchtop top and a single 2-1/2 in port. Choose the RA1171 for cabinet storage and two dust ports.

Both tables share key Bosch features. Each has a rigid aluminum mounting plate pre-drilled for a variety of routers and an extra tall aluminum fence.

The RA1181 gives you 27 x 18 in of aluminum top and weighs 30 lb. It also has a cord wrap, storage pocket and power-cord lock for portable use.

The RA1171 gives you a smooth laminated top and a cabinet base. It includes an adjustable clear guard, starter pin and guard, two featherboards, two outfeed shims and three insert rings.

If you want a broader view of table forms, our best router table for woodworking guide compares more options. You can also check a router table attachment if you want to add a table to an existing bench.

For a different brand pairing, see our router table for craftsman router guide.

Rule: pick the RA1181 to move it, and the RA1171 to keep it fixed.

What mistakes should you avoid with a Bosch router table?

Avoid buying a table before you confirm your router's base pattern. Plate fit is the first filter, and it removes many options fast.

Avoid using a fence that is too short for tall stock. Tall stock needs full backing, or it can tip and catch the bit.

Avoid skipping featherboards on long cuts. They guide the stock and help prevent kickback when the bit grabs.

Avoid routing without dust collection for long sessions. Dust can hide your cut line and coat the top, which affects accuracy.

Avoid storing the table where it can get knocked or warped. A top that is not flat will produce cuts that are not flat.

If you also own a miter saw, our Best Miter Saw Table and Best Miter Saw Work Table guides can help you plan bench space. A router table and a miter saw table can share a bench if you plan the layout.

Rule: confirm fit, fence height and dust ports before you buy.

Final checklist for a Bosch router table

Use this checklist to decide between the RA1181 and the RA1171 for a router table for Bosch router work. Measure first, then match the form to your shop.

Check your router base pattern against the pre-drilled plate. Confirm the table top size fits your longest workpiece.

Check fence height against your tallest stock. Confirm the dust port fits your vacuum hose.

Decide whether you need storage or portability. Test the setup on scrap before you cut good parts.

Pick the benchtop RA1181 if you move your table and want a large aluminum top. Pick the cabinet RA1171 if you keep your table fixed and want two dust ports and storage.

That choice gives you a table you can mount, adjust and clean with confidence. It also gives you a fence and dust path that suit the work you actually do.

Frequently asked questions

Will a Bosch router fit a router table?

Many Bosch routers fit tables with a pre-drilled plate, but you must check your exact base pattern and mounting hardware. Bosch says its RA1181 and RA1171 plates are pre-drilled for a variety of routers.

Measure your base and compare the hole pattern before you order.

What size router table top should I buy?

A 27 x 18 in top suits most benchtop work and long boards, while smaller tops suit trim and small parts. The RA1181 gives you 27 x 18 in of aluminum top.

Choose size by your longest workpiece and the bench space you can spare.

Can I use a router table without dust collection?

You can, but routing creates fine dust quickly and a port helps keep the cut visible. Both Bosch tables here have a 2-1/2 in port, and the RA1171 adds a second cabinet port.

Connect a vacuum or dust collector rated for your shop before long cuts.

Do I need a cabinet style table or a benchtop table?

Pick a cabinet style table if you want storage and two dust ports, and pick a benchtop table if you want a lighter portable top. The RA1171 is cabinet style and the RA1181 is benchtop style.

Your bench space and storage needs decide the form.