6 Best Replacement Pads for Bosch Orbital Sanders (November 2026)
The best Bosch orbital sander replacement pads include the Poweka 5”ROS20vs Replacement Sanding Pad Compatible for ROS10 and ROS20VS owners, the Gnellkoor 2PCS 5" Hook & Loop RS032 for older Bosch 1295 and 3107 models, and the Gnellkoor Orbital Sander Pad Replacement for Bosch for broad ROS20 family fit.
On this page (10 sections)
- Best Bosch orbital sander replacement pads by model and size
- Side by side: best Bosch orbital sander replacement pad options
- How we compared these Bosch replacement pads
- Which Bosch pad size do I need?
- How do I install a Bosch orbital sander replacement pad?
- Hard pad or soft pad: which should I choose?
- How often should I replace a sander pad?
- Which pad fits my exact Bosch model?
- Bosch pad replacement: what to check before you order
- Verdict: best Bosch orbital sander replacement pad
The best Bosch orbital sander replacement pad for most owners is the Poweka 5”ROS20vs Replacement Sanding Pad, because it fits the ROS10 and ROS20VS, uses an 8-hole pattern and comes as a 2-pack. If you own a 6 in model such as the 1250DEVS or GET75-6N, skip the 5 in pads and choose a 6 in pad instead.
A worn pad causes more problems than a dull disc. The hook field loosens, dust pickup falls and the disc can shift during a pass.
A new pad restores grip and keeps the disc flat against the work.
Start by finding the model number on the sander label. Our guide to different types of sanders helps you confirm the sander type before you measure the pad.
Then match diameter, mounting and hole count.
Our picks at a glance
-
1
Best for ROS10 and ROS20VS ownersPoweka 5”ROS20vs Replacement Sanding Pad Compatible
9.7/10 our score
See it on Amazon -
2
Best for older Bosch 1295 and 3107 modelsGnellkoor 2PCS 5" Hook & Loop RS032
9.6/10 our score
See it on Amazon -
3
Best for broad ROS20 family fitGnellkoor Orbital Sander Pad Replacement for Bosch
9.5/10 our score
See it on Amazon
- 4
Check itPoweka 5" ROS20VSC Sander Replacement Pad Compatible
Best 3-pack for ROS20VSC owners - 5
Check itPoweka 6" Replacement Sanding Pad Compatible
Best for 1250DEVS and ROS65VC - 6
Check itDimsile 6" Replacement Sander Pad Compatible
Best for GET75-6N owners
Best Bosch orbital sander replacement pads by model and size
The right pad depends on your exact Bosch model, not on brand preference. Five inch ROS models need a 5 in pad, while larger 1250DEVS and GET75 models need a 6 in pad.
Check the model before you compare counts and materials.
Poweka 5”ROS20vs Replacement Sanding Pad Compatible: Best for ROS10 and ROS20VS owners
- 5 in diameter
- 8-hole hook and loop pad
- Rubber construction
- 2-pack
- Compatible with Bosch ROS10 and ROS20VS
A hard rubber 5 in pad for the ROS10 and ROS20VS, with 8 holes for dust collection.
Pros
- Fits ROS10 and ROS20VS
- 8 dust collection holes
- 2-pack gives a spare pad
Cons
- 5 in size only
- Hard durometer may be aggressive for fine finish work
This Poweka pad suits owners of the ROS10 and ROS20VS who want a direct 5 in replacement. It is 5 in in diameter and uses an 8-hole hook and loop layout for sanders with dust collection.
For a cushioning layer between the pad and abrasive, see five-inch orbital sander interface pads.
Poweka says the rubber is hard durometer for aggressive sanding on flat surfaces, especially with coarser abrasives. That trait suits paint removal and fast stock removal more than fine finishing.
The 2-pack is the practical draw. You can fit one pad and keep the second as a spare for a worn hook field.
The pack does not solve fit for 6 in models, so check the model number first.
Buy it if you own a ROS10 or ROS20VS and want a 5 in 8-hole pad. Skip it for 1250DEVS, ROS65VC or GET75-6N sanders.
Gnellkoor 2PCS 5" Hook & Loop RS032: Best for older Bosch 1295 and 3107 models
- 5 in diameter
- 8-hole design
- Engineering plastics and hard rubber
- 2-pack
- RS032 and RS031 fitment
A 2-pack RS032 pad for Bosch 1295, 3107DVS and 3725DEVS random orbital sanders.
Pros
- Covers older Bosch models
- 8-hole dust pattern
- 2-pack
Cons
- Does not include screws
- Does not fit ROS10 or ROS20 models
This Gnellkoor RS032 pack suits owners of older Bosch models in the 1295, 3107DVS and 3725DEVS families. It covers Bosch 1295DP, 1295D, 1295DH, 1295DVS, 3107DVS, 3725DVS and 3725DEVS random orbital sanders.
The pad is 5 in and uses an 8-hole design. It is made of engineering plastics and hard rubber, and Gnellkoor says the hard rubber can reduce vibration and improve grinding effect.
The pack includes 2 pads. It does not include screws, so you must reuse the screws from the old pad.
That detail matters if your old screws are stripped or missing.
Buy it if your model number matches the 1295, 3107DVS or 3725DEVS list. Skip it for ROS10, ROS20 and ROS20VS models, which use a different pad family.
Gnellkoor Orbital Sander Pad Replacement for Bosch: Best for broad ROS20 family fit
- 5 in diameter
- 8-hole hook and loop pad
- Engineering plastics and hard rubber
- 2-pack
- RS034 and RS035 fitment
A 5 in 8-hole pad covering ROS10, ROS20, ROS20VS, ROS20VSC and GEX models.
Pros
- Wide ROS20 family fit
- 8-hole dust pattern
- 2-pack
Cons
- 5 in size only
- Screws from the old pad are reused
This Gnellkoor pad suits a wider group of 5 in Bosch owners. It fits ROS10, ROS20, ROS20VS, ROS20VSC, ROS20VSK, GEX12V-5N, GEX18V-5N and GEX18V-5B15.
The pad is 5 in with an 8-hole hook and loop face. It uses RS034 and RS035 fitment, so check your old pad or manual if you are unsure which code applies.
Gnellkoor says the engineering plastic backboard is strong and high temperature resistant, while the hard rubber layer helps reduce vibration. The pack has 2 pads, and you reuse the 4 screws from the sander.
Buy it if you want one 5 in pad that covers the ROS20 family and GEX 5 in models. Skip it if you need a 6 in pad or if your screws are damaged.
Poweka 5" ROS20VSC Sander Replacement Pad Compatible: Best 3-pack for ROS20VSC owners
- 5 in diameter
- 8-hole hook and loop pad
- Hard rubber
- 3-pack
- RS034 and RS035 fitment
A 3-pack 5 in pad for ROS20VS, ROS20VSC, ROS20VSK, ROS20 and ROS10.
Pros
- 3-pack value
- 8 dust collection holes
- Broad ROS20 family fit
Cons
- 5 in size only
- Hard durometer suits coarse abrasives first
This Poweka 3-pack suits ROS20VS, ROS20VSC, ROS20VSK, ROS20 and ROS10 owners who sand often. It is a 5 in 8-hole hook and loop pad with RS035 and RS034 fitment.
Poweka says the hard rubber suits aggressive sanding on flat surfaces with coarser abrasives. The 8 dust holes line up with sanders that have a dust collection system and a dust bag assembly.
The count is the main difference from the 2-pack Poweka pad. Three pads give you a spare for a busy shop or a long project.
The trade-off is that it is still 5 in only and hard in feel.
Buy it if you own a ROS20VSC or another ROS20 family model and want extra pads on hand. Skip it for 6 in Bosch sanders.
Poweka 6" Replacement Sanding Pad Compatible: Best for 1250DEVS and ROS65VC
- 6 in diameter
- 6-hole hook and loop pad
- Rubber construction
- Replaces RS6045
- Fits 1250DEVS, 3727DEVS, 3727DVS and ROS65VC
A single 6 in 6-hole pad for 1250DEVS, 3727DVS and ROS65VC sanders.
Pros
- Fits larger 6 in Bosch models
- Flexible rubber for flat or contour sanding
- 6-hole pattern
Cons
- Single pad only
- Does not fit 5 in ROS models
This Poweka pad suits owners of 1250DEVS, 3727DEVS, 3727DVS and ROS65VC sanders. It is 6 in in diameter with a 6-hole hook and loop pattern.
It replaces the RS6045 6 in pad. Poweka describes it as a flexible, general-purpose rubber pad for flat or contour sanding without gouging.
That flexibility makes it useful on small edges as well as flat panels.
The pack contains 1 pad. If you sand daily, compare the single-pack cost with a 2-pack option for another 6 in model.
Fit matters more than count, so confirm the 6-hole pattern first.
Buy it if you own a 1250DEVS, 3727DVS, 3727DEVS or ROS65VC. Skip it for any 5 in ROS model.
Dimsile 6" Replacement Sander Pad Compatible: Best for GET75-6N owners
- 6 in diameter
- Multi-hole hook and loop pad
- 2-pack
- Aluminum drive plate
- Compatible with GET75-6N
A 2-pack 6 in multi-hole pad for the GET75-6N dual-mode random orbit sander.
Pros
- Fits GET75-6N
- 2-pack
- Reinforced backing plate
Cons
- Narrow model fit
- 6 in size only
This Dimsile 2-pack suits owners of the GET75-6N dual-mode random orbit sander. It is a 6 in multi-hole hook and loop pad for that model family.
Dimsile says the pad has a reinforced backing plate and a precision-stamped, riveted aluminum drive plate. That construction is aimed at stability during detailed sanding, paint touch-ups and sanding between layers.
The multi-hole design aids dust removal. The hook and loop face allows quick disc changes.
The fit is narrow, so this is not a general 6 in pad for every Bosch sander.
Buy it if you own a GET75-6N and want a 2-pack 6 in pad. Skip it for 1250DEVS unless your model and hole pattern match.
Side by side: best Bosch orbital sander replacement pad options
The Poweka 5 in pads cover the ROS10 and ROS20 family, the Gnellkoor RS032 covers older 1295 and 3107 models, and the 6 in Poweka and Dimsile pads cover larger sanders. Diameter and model fit separate these groups more than any other trait.
| Product | Best for | Diameter | Hole pattern | Count | Our score |
|---|---|---|---|---|---|
| Poweka 5”ROS20vs Replacement Sanding Pad Compatible | ROS10 and ROS20VS owners | 5 inches | 8 holes | 2 | 9.7 |
| Gnellkoor 2PCS 5" Hook & Loop RS032 | older Bosch 1295 and 3107 models | 5 inches | 8 holes | 2 | 9.6 |
| Gnellkoor Orbital Sander Pad Replacement for Bosch | broad ROS20 family fit | 5 inches | 8 holes | 2 | 9.5 |
| Poweka 5" ROS20VSC Sander Replacement Pad Compatible | 3-pack for ROS20VSC owners | 5 inches | 8 holes | 3 | 9.4 |
| Poweka 6" Replacement Sanding Pad Compatible | 1250DEVS and ROS65VC | 6 inches | 6 holes | 1 | 9.0 |
| Dimsile 6" Replacement Sander Pad Compatible | GET75-6N owners | 6 inches | Multi-hole | 2 | 8.7 |
For a broader view of discs, pads and other parts, see our guide to best orbital sander replacement parts. That page helps when the pad is only one part of a worn sander.
How we compared these Bosch replacement pads
We compared the pads by diameter, hole pattern, mounting fit and model list. We checked each pack count and material against the stated model fit.
Our score weighs specs, features and buyer feedback against what you are shopping for.
We also looked at trade-offs that affect daily use. A hard 5 in pad suits coarse abrasives on flat wood.
A flexible 6 in pad suits flat or contour work and small edges. A 2-pack or 3-pack matters if you sand often.
If you see a claim about grip, vibration or dust pickup, we attribute it to the brand or to buyer patterns.
That keeps the advice honest and tied to known specs.
Which Bosch pad size do I need?
Match the diameter of your old pad first. Most ROS10 and ROS20 models use 5 in pads.
Larger models such as the 1250DEVS, 3727DVS, ROS65VC and GET75-6N use 6 in pads.
5 in pads for ROS models
Choose a 5 in pad for ROS10, ROS20, ROS20VS, ROS20VSC and ROS20VSK. These models use an 8-hole pattern in this group.
The pad should sit flush with the sander base with no overhang.
6 in pads for larger Bosch sanders
Choose a 6 in pad for 1250DEVS, 3727DVS, 3727DEVS, ROS65VC and GET75-6N. The Poweka 6 in pad uses 6 holes.
The Dimsile pad uses a multi-hole layout for the GET75-6N.
What if the old pad is worn and hard to measure?
Measure across the widest point of the pad face. Then count the dust holes and note the screw positions.
Write down the sander model number from the label before you order.
If you use a different brand sander, our page on the best DeWalt orbital sander replacement pad shows how model fit works there. The same three checks apply: diameter, mounting and holes.
How do I install a Bosch orbital sander replacement pad?
Remove the old pad by unscrewing the screws that hold it to the sander. Keep those screws, because several packs here do not include new screws.
Clean dust from the mounting area before you fit the new pad.
Fit the pad and refit the screws
Align the new pad with the screw holes and dust passages. Tighten the screws evenly so the pad sits flat.
A crooked pad can cause vibration and uneven disc wear.
Press the disc on firmly
Press the sanding disc onto the hook and loop face and twist it side to side. That helps the hooks grip the disc evenly.
Check that the disc holes line up with the pad holes.
Check dust collection before you sand
Run the sander briefly with the vacuum or bag attached. The dust holes should line up so air can pull dust through the disc.
If pickup is weak, check disc alignment and hole alignment.
For related parts and accessories, see best orbital sander accessories. A clean disc, a flat pad and good dust pickup work as a set.
Hard pad or soft pad: which should I choose?
A hard pad supports the disc on flat surfaces and helps with fast removal. That suits coarse abrasives and paint removal on flat wood.
It is less forgiving on curved edges if you press hard.
Hard rubber pads for flat sanding
The 5 in Poweka and Gnellkoor pads in this group use hard rubber. Poweka links hard durometer to aggressive sanding on flat surfaces.
That is a good match for general-purpose sanding and polishing on flat panels.
Flexible pads for contour and edges
The Poweka 6 in pad is described as flexible for flat or contour sanding without gouging. That trait helps on small edges and gentle curves.
It still needs the correct 6-hole pattern for your sander.
What about palm sanders?
If your tool is a palm sander rather than a random orbital sander, check our guide to best palm sander replacement pads. Palm pads often have a different shape and hole pattern, so do not assume a round orbital pad will fit.
How often should I replace a sander pad?
Replace the pad when hooks no longer grip the disc firmly. A disc that shifts, curls at the edge or leaves uneven scratches is a warning sign.
Also check the pad after sanding with coarse grits, which can wear the face faster.
Signs the hook field is worn
Look for bald spots where hooks have flattened. Press a disc on and peel it off, then check whether it releases too easily.
If you must press very hard to keep it on, the pad is near the end of its useful life.
Signs the pad is damaged
Check for cracks, tears, bent edges and loose mounting. A damaged pad can vibrate and can leave marks on the work.
Replace it before you start a fine finishing pass.
How to make a pad last longer
Blow dust off the hook field after each job. Use a stiff brush to clear loaded dust from the hooks.
Store the sander with the pad face protected from knocks and heat.
Which pad fits my exact Bosch model?
Use the model list for each pad as your first filter. The ROS10 and ROS20VS fit the Poweka 5”ROS20vs pad.
The ROS20VSC fits the Poweka 3-pack and the Gnellkoor ROS20 family pad.
ROS10, ROS20VS and ROS20VSC
For these models, choose a 5 in 8-hole RS034 or RS035 pad. Both the Poweka 3-pack and the Gnellkoor pad cover this family.
Confirm whether your old pad is RS034 or RS035 if both codes appear.
1295, 3107DVS and 3725DEVS models
For these older models, choose the Gnellkoor RS032 pack. It lists RS032 and RS031 fitment for Bosch 1295, 3107DVS and 3725DEVS models.
Do not use a ROS20 pad on these sanders.
1250DEVS, ROS65VC and GET75-6N
For 1250DEVS, 3727DVS, 3727DEVS and ROS65VC, choose the Poweka 6 in pad. For GET75-6N, choose the Dimsile 6 in 2-pack.
These are 6 in pads, so they will not fit 5 in ROS models.
If you own the DeWalt D26451, our guide to the best DeWalt orbital sander replacement pad D26451 covers that fit. Bosch and DeWalt pads are not interchangeable by diameter alone.
Bosch pad replacement: what to check before you order
Check the sander model, the pad diameter and the hole pattern. Then check whether screws are included.
Several packs here reuse your old screws, so inspect them before you remove the old pad.
Model number
Find the model on the sander label or manual. ROS, 1295, 1250DEVS and GET75 models use different pads.
A close match is not enough if the mounting points differ.
Hole pattern
Count the dust holes on the old pad. Use 8-hole pads for this 5 in group and 6-hole pads for the Poweka 6 in model.
The Dimsile GET75 pad uses a multi-hole layout.
Screws and pack count
Check if the pack includes screws. The Gnellkoor RS032 pack states that screws are not included.
Then decide whether a 2-pack or 3-pack fits how often you sand.
If you also service other Bosch tools, our guides on how to open a Bosch miter saw and how to calibrate a Bosch miter saw cover different setup tasks. Those guides do not affect pad fit, but they help when you maintain several tools.
Verdict: best Bosch orbital sander replacement pad
Pick the Poweka 5”ROS20vs pad if you own a ROS10 or ROS20VS and want a 5 in 2-pack. Pick the Poweka 3-pack if you own a ROS20VSC or ROS20 family model and sand often.
Pick the Gnellkoor RS032 if you own a 1295, 3107DVS or 3725DEVS model.
Pick the Poweka 6 in pad for 1250DEVS, 3727DVS, 3727DEVS or ROS65VC. Pick the Dimsile 6 in 2-pack for the GET75-6N.
In every case, match diameter, mounting and dust holes before you order. That check matters more than pack count or brand name.
Measure the old pad, write down the model number and compare the hole pattern. Then order the pad that matches all three.
That simple order will give you the best Bosch orbital sander replacement pad for your sander and your next project.
Our top 3 picks at a glance
-
1
Best for ROS10 and ROS20VS ownersPoweka 5”ROS20vs Replacement Sanding Pad Compatible
9.7/10 our score
See it on Amazon -
2
Best for older Bosch 1295 and 3107 modelsGnellkoor 2PCS 5" Hook & Loop RS032
9.6/10 our score
See it on Amazon -
3
Best for broad ROS20 family fitGnellkoor Orbital Sander Pad Replacement for Bosch
9.5/10 our score
See it on Amazon
Frequently asked questions
How do I know which Bosch pad size I need?
Measure the old pad and check the sander model number. Most ROS10 and ROS20 models use 5 in, while 1250DEVS, ROS65VC and GET75-6N use 6 in.
Match diameter first, then hole pattern.
Do I need to reuse the old screws?
Yes, in most cases. Several pads here do not include screws, and the Gnellkoor RS032 pack states that clearly.
Remove the old screws, inspect the mounting holes, then fit the new pad with the same screws.
Why do dust holes matter on a replacement pad?
The holes line up with the sander dust passages. When the pattern matches, the vacuum can pull dust through the disc and into the bag or hose.
A mismatched pattern leaves holes covered and reduces dust pickup.
Can a 5 in pad fit a 6 in Bosch sander?
No. Diameter, mounting points and hole layout must all match the sander.
A smaller pad will not cover the sander base correctly and can leave edges unsupported.
Measure the old pad before ordering.
About this guide: Our look at Bosch orbital sander replacement pads draws on maker specs, materials and what owners report. See how we research.



