5 Best Replacement Pads for Palm Sanders (November 2026)
The best palm sander replacement pads include the Gnellkoor Orbital Sander Pad Replacement for Dewalt for DeWalt DWE6423 and DWE6421 owners, the NYXCL 5 inch DeWalt DWE6423/6423K for DeWalt owners who want discs included, and the WGDJEMAX 50 PCS Sander Replacement Pad Compatible for Skil mouse sander sheets.
On this page (8 sections)
- How we picked the best palm sander replacement pads
- The best palm sander replacement pads compared
- Which palm sander pad fits your model
- Hook and loop, adhesive or foam: which backing works best
- What hole pattern and grit range should you choose
- How do you replace a palm sander pad without damaging the sander
- How do you keep a replacement pad gripping and collecting dust
- Roundup palm sander replacement pads verdict
The best palm sander replacement pads start with fit, not brand. A pad that matches your sander's shape, hole pattern and mounting method will grip discs, move dust and sand flat.
A pad that is close in size but wrong in holes or screws can wobble, clog and tear discs.
Our score weighs specs, features and buyer feedback against what you are shopping for. We compared pad size, hole count, hook and loop or adhesive mounting, foam thickness, included discs and model fit.
Our score uses the product data for each pick, not hands on testing.
Palm sander appears in this guide for round orbital models and for rectangular sheet and mouse models. The shape matters more than the word palm.
Read the fit notes for each pick before you compare price or pack size.
Our picks at a glance
-
1
Best for DeWalt DWE6423 and DWE6421 ownersGnellkoor Orbital Sander Pad Replacement for Dewalt
9.6/10 our score
See it on Amazon -
2
Best for DeWalt owners who want discs includedNYXCL 5 inch DeWalt DWE6423/6423K
9.5/10 our score
See it on Amazon -
3
Best for Skil mouse sander sheetsWGDJEMAX 50 PCS Sander Replacement Pad Compatible
9.4/10 our score
See it on Amazon
- 4
Check itJYCJCF Replacement Foam Backing Pad
Best for FS500 type sheet sanders - 5
Check itCrafty Products Replacement Hook & Loop Pad
Best for universal rectangular palm and mouse sanders
How we picked the best palm sander replacement pads
We checked each pad against the models and part numbers in its data. That step cut out pads that look right but mount wrong.
We also checked hole counts, grits and pack counts, since those change how often you stop to clean and swap discs.
Hook and loop pads scored well when they pair with standard discs and dust holes. Foam pads scored well when the foam adds cushion without making flat work feel spongy.
Adhesive pads scored on exact part fit, since alignment is a one shot task.
Dust extraction came down to hole alignment. An 8 hole pattern only helps when the sander face uses 8 holes and the disc has matching holes.
More holes do not help if they sit in the wrong place.
The best palm sander replacement pads compared
Five pads cover the main palm sander replacement jobs in this guide. Two target round 5 inch DeWalt orbital sanders.
One targets Skil mouse sanders. One targets FS500 type sheet sanders.
One is a universal rectangular pad.
Gnellkoor Orbital Sander Pad Replacement for Dewalt: Best for DeWalt DWE6423 and DWE6421 owners
- 5 inch pad with 8 dust holes
- 4 screw holes
- Hook and loop surface
- 2 pack
A direct DeWalt fit pad with an 8 hole dust pattern and a 2 pack for spare use.
Pros
- Matches listed DeWalt models
- 8 holes for dust extraction
- Two pads in the pack
Cons
- Screws are not included
- Measure hole spacing before you order
Gnellkoor suits DeWalt owners who want a plain pad swap and nothing extra. The 5 inch pad has 4 screw holes and 8 dust holes.
The screw hole spacing is 1.97 in between non adjacent holes and 1.38 in between adjacent holes.
That spacing is the fit test that matters. Measure your old pad or check the sander manual before you order.
If the spacing matches, the swap is simple: remove 4 screws, fit the new pad, and use your own screws since screws are not included.
Hook and loop grip holds the disc during work. The maker says the high density hooks help stop discs from flying off.
The 8 holes line up with dust collection when your sander and discs use the same pattern.
This pick trades extras for a clean fit. You get a 2 pack of pads, so one can cover a spare while the other stays on the sander.
You do not get discs, which means it suits owners who already have 5 inch 8 hole discs on hand. Our DeWalt replacement parts guide helps when the sander itself needs more than a pad.
NYXCL 5 inch DeWalt DWE6423/6423K: Best for DeWalt owners who want discs included
- 5 inch 8 hole pad
- Hook and loop foam interface pads
- 30 sanding discs in 100 to 400 grit
- 35 piece set
A DeWalt replacement pad set with interface pads and 30 discs across six grits.
Pros
- Discs cover 100 to 400 grit
- 8 hole pattern for dust control
- Interface pads add contour cushioning
Cons
- Interface pads may be too soft for flat work
- Check model fit before you order
NYXCL suits DeWalt owners who want a pad plus discs in one box. The 5 inch 8 hole pad fits listed DeWalt models, including DWE6423, DWE6423K, DWE6421, DWE6421K and DCW210B.
It replaces pad part numbers DWE64233 and N329079.
The set adds 4 soft foam interface pads and 30 aluminum oxide discs. Disc grits run 100, 150, 180, 240, 320 and 400, with 5 discs in each grit.
That range covers rough shaping through fine smoothing in one order.
The foam interface pads change how the sander feels on the work. Soft foam helps the disc follow gentle contours and sand closer to edges.
The same foam can make flat panels feel less direct, so keep the plain pad on the sander for flat work and add foam only when the shape calls for it.
Dust control uses the 8 hole design on the pad and discs. Clear the holes when you change grits, or dust builds up and the disc lifts at the edge.
The set also suits metal grinding and polishing tasks in the maker data, plus wood sanding.
This pick wins on convenience and loses on simplicity. You get more parts to store and more choices to sort.
If you only need a bare pad, Gnellkoor is the cleaner buy.
WGDJEMAX 50 PCS Sander Replacement Pad Compatible: Best for Skil mouse sander sheets
- 50 pcs
- 60, 80, 120 and 240 grit
- 11 hole hook and loop design
- Compatible with Skil SR6607B-10 and SR232301
A 50 piece set of mouse sander sheets with mixed grits for rough work through fine finishing.
Pros
- Large count for detail work
- Mixed grits in one set
- 11 holes for dust extraction
Cons
- Not a round 5 inch pad
- Fit is tied to listed Skil models
WGDJEMAX suits owners of Skil mouse and multi sanders who want a deep stock of sheets. The set holds 50 pcs with an 11 hole hook and loop design.
Fit is listed for Skil SR6607B-10 and SR232301.
Grits mix 60, 80, 120 and 240 in one set. Coarse grits remove stock fast on rough wood.
Finer grits smooth the surface for paint or finish. A 50 piece count means you can move through a project without reordering mid job.
The shape is the key point. This is a mouse sander sheet set, not a round 5 inch pad.
It suits detail areas, corners and narrow parts where a round pad cannot reach. For broader flat panels, a round orbital pad or a sheet sander pad will cover more area per pass.
Hook and loop backing holds the sheet and lets you swap grits fast. The 11 hole pattern supports dust extraction when the sander face matches it.
Aluminum oxide grit gives consistent cutting on wood, metal, drywall, fiberglass and painted surfaces.
This pick trades range for depth. You get many sheets in four grits, but no 180 or 320 grit step.
Pair it with a broader grit set if your finishing work needs those steps. Our best palm sander sandpaper guide explains grit steps in more detail.
JYCJCF Replacement Foam Backing Pad: Best for FS500 type sheet sanders
- Foam backing pad 58474100
- 3 pack
- 4.48 in x 4.37 in
- Compatible with listed FS500 type models
A 3 pack of foam backing pads cut for listed FS500 type sheet sanders.
Pros
- Exact part number match
- Three pads in the pack
- Rectangular sheet sander shape
Cons
- Adhesive fit needs careful alignment
- Limited to listed models
JYCJCF suits owners who need an exact foam backing pad for FS500 type sheet sanders. The part number is 58474100, also written 584741-00.
The pad measures 4.48 in x 4.37 in and comes in a 3 pack.
Fit covers FS500 Type 1 and Type 2, FS500-B Type 1, FS520 Type 1, FS540 Type 1, FS540K Type 1, FS600G Type 1, QS540B Type 1 and TV700 Type 2. That list is narrow on purpose.
Check your sander type before you order, since a close size will not fix a wrong part.
Foam backs the sheet and adds a small amount of cushion. That cushion helps the sander follow the work without digging in as fast as a hard backing.
It also means the pad feels less rigid on flat panels, which some owners prefer for final smoothing.
Mounting uses adhesive, not screws or hook and loop. Clean the old surface, align the pad, and press it firmly in place.
Once it sticks, it stays stuck, so take time to center it before contact.
This pick is for exact fits, not universal fixes. If your sander is not on the list, skip it.
If it is on the list, the 3 pack gives spares for a part that is hard to find in a local shop.
Crafty Products Replacement Hook & Loop Pad: Best for universal rectangular palm and mouse sanders
- 150mm x 100mm
- Hook and loop surface
- Adhesive backing
- Heat resistant design
- 1 hook pad
A single universal rectangular hook and loop pad for palm, mouse and detail sanders.
Pros
- Wide fit across rectangular sanders
- Quick sheet changes
- Heat resistant design
Cons
- Single pad only
- Adhesive backing needs clean prep
Crafty Products suits owners of rectangular palm, mouse and detail sanders who want a universal hook and loop pad. The pad measures 150mm x 100mm, about 5.91 in x 3.94 in.
The shape is rectangular, so it suits sheet style sanders rather than round orbital sanders.
Mounting is adhesive on the back and hook and loop on the face. The adhesive bonds the pad to the sander base.
The hook and loop face holds the sanding sheet and lets you swap sheets fast. Clean the base well before you stick it on, since dust under the adhesive can lift an edge.
The maker describes a heat resistant design for intense use. Heat builds up during long sanding runs, and heat can weaken grip and foam over time.
A heat resistant pad is a smart pick if you sand for long stretches between sheet changes.
This pick is a single pad, so it is a fix rather than a stock up. It suits an older sander with a worn pad that still runs well.
It does not suit a round 5 inch orbital sander, and it will not fit a rectangular sander that needs a different length or width.
Before you buy, measure your sander base and compare it with 150mm x 100mm. If your base is smaller, the pad can overhang and catch on edges.
If your base is larger, the pad will not cover the full sanding area.
Which palm sander pad fits your model
Round 5 inch pads fit round orbital sanders. Gnellkoor and NYXCL both use a 5 inch 8 hole pattern for listed DeWalt models.
That pattern is common, but it is not universal.
Measure the hole spacing and check the model list before you order.
Mouse sander sheets fit detail sanders. WGDJEMAX fits listed Skil mouse models with an 11 hole pattern.
The pointed shape reaches corners that a round pad misses.
It will not fit a round sander, even if the grit count looks tempting.
Rectangular foam pads fit sheet sanders by part number. JYCJCF fits listed FS500 type models only.
The 4.48 in x 4.37 in size and part number 58474100 are the fit tests.
Skip it if your model is not on the list.
Universal pads fit by measurement. Crafty Products measures 150mm x 100mm.
That size can suit many palm, mouse and detail sanders.
Measure your base in both directions before you stick on an adhesive pad.
Our different types of sanders guide helps if you are unsure whether your tool is orbital, sheet, mouse or detail type. That step saves returns, since pad shape follows sander shape.
Hook and loop, adhesive or foam: which backing works best
Hook and loop suits fast disc changes. You press a disc on, sand, peel it off, and press on the next grit.
That speed helps when you move from 120 to 180 to 240 grit on one panel.
Hook and loop also lets you reseat a disc if it lands crooked.
Adhesive suits low cost exact fits. JYCJCF and Crafty Products both use adhesive on the mounting side.
Adhesive pads often cost less and hold firm when the surface is clean.
The trade off is that removal and realignment take more work.
Foam adds cushion, not grip. NYXCL interface pads and the JYCJCF foam pad both cushion the disc.
Cushion helps on gentle curves and reduces the risk of abrupt digging.
It can also round over edges on flat work if you use too much foam.
Match the backing to your sander first. A hook and loop pad will not fix a sander built for adhesive sheets.
An adhesive pad will not fix a sander built for hook and loop discs. The mounting method is a hard limit, not a preference.
What hole pattern and grit range should you choose
Hole count must match your sander face. An 8 hole pad needs an 8 hole sander and 8 hole discs.
An 11 hole sheet needs an 11 hole sander face.
When holes line up, dust moves through the disc and into the port. When they do not line up, dust packs under the disc and the disc lifts.
Grit range should cover your next three steps. NYXCL covers 100 through 400 grit in six steps.
That range suits rough work through fine finishing.
WGDJEMAX covers 60, 80, 120 and 240 grit. That range suits stock removal and mid level smoothing for mouse sanders.
More grits are not always better. A wide range helps if you start new projects often.
If you mostly finish panels, a narrower range around 120 to 240 grit may be all you need.
Unused grits still cost storage space and can age before you use them.
Disc count changes how often you reorder. A 50 piece set suits high use detail work.
A 30 disc set suits mixed projects.
A bare pad suits owners who already own discs. Buy the count that matches your monthly use, not the largest box.
How do you replace a palm sander pad without damaging the sander
Screw mounted pads come off with 4 screws. Gnellkoor shows that method for its DeWalt fit pad.
Remove the screws, lift the old pad straight up, and set the new pad in the same spot.
Tighten the screws in a cross pattern so the pad sits flat.
Adhesive pads need surface prep. Scrape off old adhesive, wipe away dust, and let the surface dry.
Align the new pad before it touches the base.
Adhesive pads rarely forgive a crooked start, so center it with care.
Hook and loop faces need cleaning too. Pull off loose dust and old disc fibers from the hooks.
Clogged hooks grip poorly and let discs shift under pressure.
A stiff brush or a hook cleaning tool can lift packed dust from the face.
Seat the disc and check the holes. Press the disc down flat from the center out.
Check that each dust hole lines up with a hole in the disc.
Run the sander for a few seconds off the work to confirm the disc stays put.
How do you keep a replacement pad gripping and collecting dust
Clean hooks after each grit change. Dust fills the spaces between hooks and weakens grip.
A quick brush keeps the disc seated and cuts the risk of a disc flying off mid job.
Clear dust holes before they clog. Tap the pad face down, brush the holes, and check the disc holes for packed dust.
Clogged holes raise heat under the disc and can cause uneven wear.
Store pads flat and clean. Stack pads with the hook face protected from dust and grit.
A dirty hook face picks up grit that can scratch the next panel.
Keep spare pads in a clean bag or box.
Watch for wear signs. Torn foam, bald hooks, curled edges and uneven thickness all mean the pad is done.
A worn pad can let a disc chatter, shift or cut deeper on one side.
Replace it before the surface shows the damage.
Roundup palm sander replacement pads verdict
The best palm sander replacement pads are the ones that match your sander first. For listed DeWalt models, Gnellkoor is the clean pad only pick and NYXCL is the pad plus discs pick.
For Skil mouse sanders, WGDJEMAX gives a deep 50 piece stock.
For FS500 type sheet sanders, JYCJCF gives an exact part fit. For rectangular palm and detail sanders, Crafty Products gives a universal adhesive fix.
Measure the shape, hole pattern and mounting method before you order. That one check matters more than pack size or extra grits.
If your sander is a Makita, our Makita replacement pad guide narrows the fit further. If you want open ended options, our best palm sander replacement parts guide covers more than pads.
If cost is on your mind, our miter saw blade cost guide shows how accessory pricing varies by type. Start with the best palm sander for woodworking if the sander itself is due for an upgrade, then match the pad to the model you keep.
Our top 3 picks at a glance
-
1
Best for DeWalt DWE6423 and DWE6421 ownersGnellkoor Orbital Sander Pad Replacement for Dewalt
9.6/10 our score
See it on Amazon -
2
Best for DeWalt owners who want discs includedNYXCL 5 inch DeWalt DWE6423/6423K
9.5/10 our score
See it on Amazon -
3
Best for Skil mouse sander sheetsWGDJEMAX 50 PCS Sander Replacement Pad Compatible
9.4/10 our score
See it on Amazon
Frequently asked questions
How do I know which palm sander replacement pad fits my sander?
Match the pad shape, diameter or rectangular size, hole pattern and mounting method to your sander. For round pads, compare the 5 inch size and the number and spacing of dust holes.
For sheet sanders, compare the length, width and part number.
When should I replace a palm sander pad?
Replace a pad when hooks no longer grip discs, foam tears, or the pad sits uneven. Weak grip lets a disc shift and can score the surface.
A worn pad also hurts dust extraction when holes no longer line up.
Are hook and loop pads better than adhesive pads?
Hook and loop pads let you swap discs fast and reuse the disc for another grit. Adhesive pads suit sanders built for stick on sheets and can hold well when the surface is clean.
Your sander design decides which type you need.
Do replacement pads include sanding discs?
Some sets include discs and some sell the pad alone. Check the count and grit range before you order.
A set with discs helps if you need a fresh range of grits right away.
Why does dust extraction get worse after a pad swap?
Dust holes must line up with the sander face and the disc. A pad with fewer holes, blocked holes or a different spacing can cut airflow.
Seat the disc flat and clear the holes before each grit change.
About this guide: Our look at palm sander replacement pads draws on maker specs, materials and what owners report. See how we research.



