Best picks

9 Best Plunge Routers for Woodworking (November 2026)

Updated on · By the Best Saw Guide team

The best plunge routers for woodworking include the DEWALT Router for most woodworkers, the Dremel 335-01 Plunger Router Rotary Tool Attachment for small detail work, and the SKIL 14 Amp Plunge and Fixed Base for speed control.

On this page (10 sections)
  1. Best plunge routers for woodworking by job
  2. How the best plunge router for woodworking picks compare
  3. How we compared these plunge routers
  4. What size and power plunge router do you need?
  5. Plunge router vs fixed base: which should you choose?
  6. How do depth stops and speed control help?
  7. Corded or cordless plunge router: which is better?
  8. How do you set up and use a plunge router safely?
  9. What bits and accessories should you buy with a plunge router?
  10. Verdict: which plunge router should you buy?

The best plunge router for woodworking for most people is the DEWALT Router DW618PKB, because its 2-1/4 HP motor, variable speed and both bases cover handheld plunging and fixed-base edge work. You get micro-fine depth control in 1/64-inch steps, soft start, and dust collection that helps you see the bit.

A plunge router matters when the cut starts in the middle of the board. You set the depth, lower the bit under control, and lift it out without moving sideways into the work.

That action suits mortises, stopped grooves, inlays and repeated stepped cuts.

Start with your usual board width and bit size. Then match motor power and plunge depth to those jobs.

Our wood routers for woodworking buying guide covers the bigger picture if you are new to routers.

Our score weighs specs, features and buyer feedback against what you are shopping for. We compared motor power, speed range, plunge depth, bases included, weight and depth controls across these nine picks.

Our picks at a glance

  1. 1 DEWALT Router
    Best for most woodworkers

    DEWALT Router

    9.7/10 our score

    See it on Amazon
  2. 2 Dremel 335-01 Plunger Router Rotary Tool Attachment
    Best for small detail work

    Dremel 335-01 Plunger Router Rotary Tool Attachment

    9.6/10 our score

    See it on Amazon
  3. 3 SKIL 14 Amp Plunge and Fixed Base
    Best for speed control

    SKIL 14 Amp Plunge and Fixed Base

    9.6/10 our score

    See it on Amazon
  1. 4Bosch 1617EVSPK 2.25 HP Combination Plunge-

    Bosch 1617EVSPK 2.25 HP Combination Plunge-

    Best for table and handheld use
    Check it
  2. 5WORKPRO 6.5 Amp Compact Router Combo KitCheck it
  3. 6DEWALT Plunge Base For Compact Router

    DEWALT Plunge Base For Compact Router

    Best for compact router owners
    Check it
  4. 7Makita RP1800 3-1/4 HP* Plunge Router

    Makita RP1800 3-1/4 HP* Plunge Router

    Best for deep plunge cuts
    Check it
  5. 8BOSCH MRC23EVSK Combination Router 15 Amp 2.3Check it
  6. 9Feanron Double Fluted Straight Cut Router Bit

    Feanron Double Fluted Straight Cut Router Bit

    Best for straight grooving bits
    Check it

Best plunge routers for woodworking by job

The DEWALT leads for all-around use, while the Makita suits deep cuts and the Dremel suits small work. Choose by the cuts you make most, not by the highest horsepower alone.

1

DEWALT Router: Best for most woodworkers

DEWALT Router, plunge routers for woodworking
9.7/10Our score
  • 2-1/4 HP, 12-amp motor
  • 8,000-24,000 RPM variable speed
  • Fixed and plunge bases included
  • Micro-fine depth ring in 1/64-inch increments
  • Soft start and electronic feedback

A complete combo kit with power for hardwoods and fine depth control for repeat cuts.

See it on Amazon

Pros

  • Both bases in one kit
  • Precise depth ring
  • Dust collection through column

Cons

  • Corded only
  • Heavier than compact options

The DEWALT Router DW618PKB suits woodworkers who want one kit for plunging, edge work and template cuts. Its 12-amp, 2-1/4 HP motor runs from 8,000 to 24,000 RPM with electronic feedback, so speed stays steadier when the bit loads up in hardwood.

You get the DW618M motor pack with both the DW6184 fixed base and DW6182 plunge base. That pairing lets you move from a stopped mortise to an edge profile without buying a second motor.

If you plan to mount this kit, check DeWalt router table fit first.

Depth control is a strong point here. The micro-fine ring adjusts in 1/64-inch increments, and the tool-free steel cam lock makes base swaps quick and solid.

Soft start reduces start-up torque, which helps control at the start of a plunge. Through-the-column dust collection collects 95% of dust, according to DEWALT, and improves bit visibility.

The trade-off is size and corded power. At 10.1 lb, it is not a trim router, and you need a cord for every cut.

DEWALT RouterCheck it on Amazon
2

Dremel 335-01 Plunger Router Rotary Tool Attachment: Best for small detail work

Dremel 335-01 Plunger Router Rotary Tool Attachment, plunge routers for woodworking
9.6/10Our score
  • Plunge depth to 1.875 in
  • Clear base
  • Edge and circle guides included
  • For Dremel rotary tools

Turns a Dremel rotary tool into a compact plunge router for small projects.

See it on Amazon

Pros

  • Compact size
  • Clear base for visibility
  • Guides included

Cons

  • Needs a Dremel rotary tool
  • Limited range on larger work

The Dremel 335-01 suits small projects where a full-size router is too big. It turns a Dremel rotary tool into a compact plunge router with depth adjustment to 1.875 inches deep.

It is made for decorative trim edges, straight slots, circles, detail carving, inlay work and freehand routing. The clear base helps you see the work surface and avoid marking the board.

A plunge lock-in handle locks depth fast, and two depth stops with quick release speed up repeat settings. The edge guide helps with straight lines, and the circle cutting guide helps with precise circles.

Compatibility matters here. Dremel lists this attachment for rotary tool models 4300, 4000, 3000, 200, 100, 8260, 8250, 8240 and 8220.

The trade-off is power and bit size. It is a rotary tool attachment, not a replacement for a 2 HP router on large hardwood work.

Dremel 335-01 Plunger Router Rotary Tool AttachmentCheck it on Amazon
3

SKIL 14 Amp Plunge and Fixed Base: Best for speed control

SKIL 14 Amp Plunge and Fixed Base, plunge routers for woodworking
9.6/10Our score
  • 14 amp, 2.5 HP motor
  • Speed control LCD display
  • Plunge depth to 2-1/8 in
  • Electronic feedback and soft start
  • 1/4 and 1/2 in collets

Strong combo power with an LCD that suggests speed settings by bit and material.

See it on Amazon

Pros

  • LCD speed guidance
  • Deep plunge capacity
  • Both bases included

Cons

  • Heavier at 14.3 lb
  • Corded only

The SKIL 14 Amp Plunge and Fixed Base suits buyers who want speed guidance built in. Its 14-amp, 2.5 HP motor runs to 25,000 RPM, with electronic feedback to hold speed under load.

The speed control LCD display lets you select bit type and material for suggested speed settings. That helps if you are unsure how fast to run a bit in plywood versus hardwood.

You get both fixed and plunge bases, plus 1/4 and 1/2 inch collets. Plunge depth reaches 2-1/8 inches, and fixed-base depth of cut is 1-3/4 inches.

Soft start ramps speed up slowly, and a live tool indicator lights when the router is connected to power. Three LED lights at the base of the motor help with visibility.

The trade-off is weight. At 14.3 lb, it is heavier than the DEWALT and WORKPRO picks, and it is corded.

SKIL 14 Amp Plunge and Fixed BaseCheck it on Amazon
4

Bosch 1617EVSPK 2.25 HP Combination Plunge-: Best for table and handheld use

Bosch 1617EVSPK 2.25 HP Combination Plunge-, plunge routers for woodworking
9.4/10Our score
  • 12 amp, 2.25 HP motor
  • 8,000-25,000 RPM variable speed
  • Plunge and fixed bases
  • Microfine depth adjustment
  • Quick-clamp motor release

A versatile combo kit built for both handheld plunging and router table mounting.

See it on Amazon

Pros

  • Table-ready fixed base
  • Constant response circuitry
  • Tool-free base changes

Cons

  • Heavier at 18.2 lb
  • Corded only

The Bosch 1617EVSPK suits woodworkers who split time between handheld work and a router table. Its 12-amp, 2.25 HP motor runs from 8,000 to 25,000 RPM with constant response circuitry.

Constant response helps stabilize start-up torque and maintain speed under load. The adjustable speed dial lets you set the speed for the bit and material.

You get a plunge base for precise depth control and a fixed base with threaded holes for router table mounting. The quick-clamp system moves the motor between bases without tools.

Microfine bit-depth adjustment gives fast, precise changes, and rounded hardwood handles help with grip and control.

The 2-inch sub-base opening helps with template loading. The kit includes 1/4 and 1/2 inch self-releasing collets and a carrying case.

The trade-off is weight at 18.2 lb and corded power. It is a workshop tool, not a light trim router.

Bosch 1617EVSPK 2.25 HP Combination Plunge-Check it on Amazon
5

WORKPRO 6.5 Amp Compact Router Combo Kit: Best for compact trimming

WORKPRO 6.5 Amp Compact Router Combo Kit, plunge routers for woodworking
9.1/10Our score
  • 6.5 amp motor
  • 12,000-30,000 RPM, 6 speeds
  • Fixed and plunge bases
  • 6 router bits included
  • 1/4 and 3/8 in collets

Compact and accessory-rich for trim, grooving and light cabinet work.

See it on Amazon

Pros

  • Compact size
  • Bits and guides included
  • Wide speed range

Cons

  • Lower power than full-size picks
  • Corded only

The WORKPRO 6.5 Amp Compact Router Combo Kit suits trim, grooving and light cabinet work. Its 6.5 amp motor runs from 12,000 to 30,000 RPM across 6 speed settings.

Speed range is wide for a compact tool. Lower speeds suit larger bits, while higher speeds suit small trimming bits and detail work.

You get fixed and plunge bases, plus 1/4 and 3/8 inch collet cones. The kit also includes 6 router bits, a straight guide, trimming guide, template guides and dust collectors.

A rack and pinion depth knob gives precise operation for cabinetry and woodworking tasks. Rubber-wrapped handles reduce hand pressure during longer use.

The transparent dust hood helps control chips and keeps the cut visible.

The trade-off is power. A 6.5 amp compact router is not the pick for heavy hardwood mortises or large panel work.

WORKPRO 6.5 Amp Compact Router Combo KitCheck it on Amazon
6

DEWALT Plunge Base For Compact Router: Best for compact router owners

DEWALT Plunge Base For Compact Router, plunge routers for woodworking
9.0/10Our score
  • Plunge base only
  • Five-position turret stop
  • Micro-fine adjustment at 5/128 in per turn
  • Steel rods and brass bushings
  • Clear LEXAN sub-base

Adds smooth, precise plunge action to a DEWALT compact router motor.

See it on Amazon

Pros

  • Very fine depth adjustment
  • Stepped turret stops
  • Smooth plunge stroke

Cons

  • Base only, no motor
  • For compact router use

The DEWALT Plunge Base DNP612 suits owners of a DEWALT compact router who need plunge action. This is a plunge base only, so it adds depth control without a new motor.

Its micro-fine depth adjustment moves 5/128 inch per turn. That fine step helps with veneer, inlays and shallow repeated cuts where small errors show.

A five-position adjustable turret stop assists with stepped or repeated plunge cuts. You can plan passes in stages instead of cutting full depth at once.

Precision-machined brass bushings and case-hardened steel guide rods give a smooth and accurate plunge stroke. The tool-free steel motor cam lock makes depth adjustment and base changes quick.

The clear LEXAN sub-base improves durability and bit visibility, and it accepts standard template guide bushings.

The trade-off is clear. You still need a compatible compact router motor, and this base alone will not route anything.

DEWALT Plunge Base For Compact RouterCheck it on Amazon
7

Makita RP1800 3-1/4 HP* Plunge Router: Best for deep plunge cuts

Makita RP1800 3-1/4 HP* Plunge Router, plunge routers for woodworking
8.7/10Our score
  • 15 amp motor
  • 22,000 RPM
  • 0 to 2-3/4 in plunge depth
  • Linear ball bearings
  • Three preset depth stops

High-power plunge-only router with the deepest listed plunge capacity here.

See it on Amazon

Pros

  • Deepest plunge capacity
  • Smooth ball-bearing plunge
  • Strong 15 amp motor

Cons

  • Plunge only, no fixed base
  • Heavy at 13.4 lb

The Makita RP1800 suits deep plunge cuts in hardwood and thick stock. Its 15 amp motor delivers 22,000 RPM for smooth routing, with 0 to 2-3/4 inches of plunge depth capacity.

That plunge range is the deepest in this group. It helps when you need to penetrate a thick workpiece without taking the cut in many small steps.

Linear ball bearings give smooth plunge action and superior performance. Oversized ball bearing construction helps with tool life under heavy use.

Quick-release plunge depth adjustment with micro control and three preset depth stops add precision for repeated work. The plunge lock lever is placed for efficient operation.

Ergonomic rubberized handles and a two-finger switch help with control, and a lock-on trigger supports continuous operation.

The trade-off is scope and weight. This is plunge-only at 13.4 lb, so edge work and table use need a different base or tool.

Makita RP1800 3-1/4 HP* Plunge RouterCheck it on Amazon
8

BOSCH MRC23EVSK Combination Router 15 Amp 2.3: Best for trigger control

BOSCH MRC23EVSK Combination Router 15 Amp 2.3, plunge routers for woodworking
8.5/10Our score
  • 15 amp, 2.3 HP motor
  • 10,000-25,000 RPM
  • Trigger control in handle
  • Fixed and plunge bases
  • 1-5/8 in fixed-base adjustment

Powerful combo kit with handle-mounted trigger control for fine speed changes.

See it on Amazon

Pros

  • Trigger speed control
  • Strong motor
  • Both bases and case

Cons

  • Corded only
  • Variable speed range starts higher

The BOSCH MRC23EVSK suits users who want speed control from the handle. Its 15 amp, 2.3 HP motor runs from 10,000 to 25,000 RPM with soft start.

The trigger-control system sits in the handle for enhanced control. That layout helps when you need to adjust speed without changing your grip.

Precision-center design helps keep the bit on the cutline. The fixed-base depth adjustment gives 1-5/8 inches of continuous microfine adjustment.

You get the motor, fixed base, plunge base, 1/4 and 1/2 inch self-releasing collets, wrenches and a carrying case. Threaded holes make the fixed base router table compatible.

The kit includes a t-handle hex height adjustment wrench and screws for table mounting. That supports quick setup for table work.

The trade-off is speed range and power source. Low speed starts at 10,000 RPM, and the tool is corded.

BOSCH MRC23EVSK Combination Router 15 Amp 2.3Check it on Amazon
9

Feanron Double Fluted Straight Cut Router Bit: Best for straight grooving bits

Feanron Double Fluted Straight Cut Router Bit, plunge routers for woodworking
8.2/10Our score
  • 6 pieces, 1/4 in shank
  • Diameters 1/4 to 3/4 in
  • Double fluted carbide tip
  • For grooving and rabbets
  • Cutting height 13/16 in

Six straight bits for plunge grooving, joinery and rabbets in common woods.

See it on Amazon

Pros

  • Six useful sizes
  • Fits most 1/4 in collets
  • Carbide tipped edges

Cons

  • Bits only, no router
  • Straight cut only

The Feanron Double Fluted Straight Cut Router Bit set suits plunge grooving and rabbet work. It includes 6 carbide-tipped bits with a 1/4 inch shank.

Cutting diameters cover 3/4, 5/8, 1/2, 3/8, 5/16 and 1/4 inches. That range covers many slot widths without changing to a different bit family.

Cutting height is 13/16 inch, which suits shallow to medium grooves in solid wood, hardwood, plywood, MDF and softwood. Double flutes help clear chips during straight cuts.

Carbide tips give a sharper edge that lasts longer than plain steel in abrasive sheet goods. Heat-resistant coating helps reduce friction and burning.

The set fits most routers with a 1/4 inch collet, plus CNC and desktop machines listed for this shank size.

The trade-off is scope. These are straight bits only, so profiles, rounds and decorative edges need other bit shapes.

Feanron Double Fluted Straight Cut Router BitCheck it on Amazon

How the best plunge router for woodworking picks compare

ProductScoreBest forPowerPlunge depthBases
DEWALT Router9.7Most woodworkers2-1/4 HPListed in kit specsFixed, Plunge
Dremel 335-019.6Small detail workRotary tool1.875 inPlunge
SKIL 14 Amp9.6Speed control2.5 HP2-1/8 inFixed, Plunge
Bosch 1617EVSPK9.4Table and handheld2.25 HPListed in kit specsFixed, Plunge
WORKPRO Compact9.1Compact trimming6.5 ampListed in kit specsFixed, Plunge
DEWALT Plunge Base9.0Compact ownersBase onlyListed in base specsPlunge
Makita RP18008.7Deep plunge cuts15 amp2-3/4 inPlunge
BOSCH MRC23EVSK8.5Trigger control2.3 HPListed in kit specsFixed, Plunge
Feanron Bit Set8.2Straight groovingBits only13/16 in cut heightN/A
ProductBest forHorsepowerBase typeMaximum speedOur score
DEWALT Routermost woodworkers2.25 hpFixed, Plunge24000 rpm9.7
Dremel 335-01 Plunger Router Rotary Tool Attachmentsmall detail work1.2Plunge9.6
SKIL 14 Amp Plunge and Fixed Basespeed controlFixed, Plunge25000 rpm9.6
Bosch 1617EVSPK 2.25 HP Combination Plunge-table and handheld use2.25Fixed, Plunge25000 rpm9.4
WORKPRO 6.5 Amp Compact Router Combo Kitcompact trimming32000 rpm9.1
DEWALT Plunge Base For Compact Routercompact router owners1.25Plunge9.0
Makita RP1800 3-1/4 HP* Plunge Routerdeep plunge cutsPlunge22000 rpm8.7
BOSCH MRC23EVSK Combination Router 15 Amp 2.3trigger control2.3Fixed, Plunge8.5
Feanron Double Fluted Straight Cut Router Bitstraight grooving bits8.2

How we compared these plunge routers

We compared specs, features and buyer feedback against controlled depth cutting. That means plunge depth, depth stops, speed control, collet sizes and base options mattered more than raw horsepower alone.

We checked motor size first. A 2 to 2-1/4 HP motor covers most hardwood routing, while a 15 amp motor adds power for deep cuts.

Compact and rotary tool options suit lighter work.

We checked depth control next. Micro-fine rings, turret stops, preset stops and lock levers decide how well you can repeat a cut.

Stepped cuts need stops you can trust.

We also checked what is in the box. Combo kits with both bases save money if you do both handheld and edge work.

A plunge-only tool makes sense if you already own a fixed base router.

For context on base styles, read our plunge router vs fixed base guide. It explains when plunging beats sliding in from an edge.

Our best fixed base router guide covers the other half of this choice. Many combo kits here bridge both styles.

What size and power plunge router do you need?

Most woodworkers need a 2 to 2-1/4 HP combo router. That size handles hardwood mortises, grooves and profiles without extreme weight.

Power matters most when the bit is wide or the wood is dense. A 15 amp motor, like the Makita RP1800 and BOSCH MRC23EVSK, gives more headroom for deep cuts.

Smaller motors still work for trim and shallow grooves. The WORKPRO 6.5 amp compact router suits light work, and the Dremel attachment suits detail work.

Think about bit diameter next. Larger bits need more torque and lower speed.

Check that your router collet matches your bits, usually 1/4 or 1/2 inch.

How much plunge depth do you need?

A 2 inch plunge depth covers most furniture and cabinet work. The SKIL reaches 2-1/8 inches, and the Makita reaches 2-3/4 inches for thicker stock.

Deep plunge capacity helps with thick doors and panels. It does not help with thin trim, where fine depth control matters more.

Check the bit length too. A deep plunge is useless if the bit cannot reach the target depth safely.

Plunge router vs fixed base: which should you choose?

Choose a plunge router for cuts that start inside the board. Choose a fixed base for edge trimming and table work.

A combo kit gives you both.

Plunging suits mortises, stopped housings, inlays and stepped grooves. You lower the bit to a set depth, move it, and raise it in place.

Fixed bases suit edge profiles, pattern work and router tables. Depth is set once, then the router slides along a guide or fence.

If you search for a Makita plunge router or a Milwaukee plunge router, check whether the model has a fixed base option. In this group, Bosch and DEWALT combo kits cover both styles.

When is a combo kit worth it?

A combo kit is worth it if you do both plunging and edge work. One motor with two bases costs less than two routers.

You also save storage space. That matters in a small shop with limited bench room.

If you only plunge, a plunge-only router like the Makita RP1800 focuses weight and cost on that task.

How do depth stops and speed control help?

Depth stops let you repeat cuts and cut in steps. Speed control lets you match the bit to the material.

A turret stop, like the five-position stop on the DEWALT DNP612, helps with stepped cuts. Preset stops, like the three on the Makita RP1800, help with repeat depths.

Micro-fine adjustment helps with shallow cuts. The DEWALT DW618PKB adjusts in 1/64-inch steps, and the DNP612 base moves 5/128 inch per turn.

Variable speed matters for large bits and delicate wood. Large bits run slower, while small trimming bits can run faster.

Electronic feedback helps hold speed under load. DEWALT, SKIL and Bosch all list that feature in this group.

What speed should you use for hardwood?

Use lower speeds for large bits in hardwood. Start at the low end of the range, then raise speed only if the cut stays clean.

The DEWALT runs from 8,000 RPM, while the Bosch 1617EVSPK runs from 8,000 RPM. That low range helps with larger bits.

The SKIL LCD suggests speed by bit type and material. That guidance helps if you are new to speed settings.

Corded or cordless plunge router: which is better?

Choose corded for sustained hardwood work and cordless for mobility. Corded routers hold power without battery limits.

Corded models in this group run all day on shop power. That helps with long grooves, large panels and repeated mortises.

If you prefer battery power, read our plunge router cordless guide. It covers runtime, bit size and weight trade-offs.

Cordless tools suit site work and light repairs. They also help when an outlet is far from the workpiece.

For miter saw users, router work often pairs with trimming and casing cuts. Our How To Use Milwaukee Miter Saw? guide covers those crosscuts.

How do you set up and use a plunge router safely?

Set depth with the bit stopped, then plunge straight down with both hands. Keep your hands clear of the bit path at all times.

Unplug the router before bit changes. Use the spindle lock or wrenches listed for your model, and check that the collet matches the bit shank.

Set depth stops before you start. Test the depth on scrap wood first, especially on the first cut with a new bit.

Plunge slowly and steadily. Fast plunging can pull the bit sideways or leave a rough edge on the cut.

Move in the direction recommended for the bit and guide setup. Clamp small workpieces firmly so they cannot shift during the cut.

Wear eye and hearing protection. Dust collection helps visibility, and the DEWALT DW618PKB lists through-the-column collection for that reason.

For budget planning on related tools, our How Much Is A Ryobi Miter Saw? guide helps with shop setup costs.

What bits and accessories should you buy with a plunge router?

Start with straight bits for grooving and mortises. Add profile bits later for edge work.

The Feanron set covers straight cuts from 1/4 to 3/4 inch with a 1/4 inch shank. That range suits many joinery tasks.

Add a straightedge or edge guide for long cuts. The Dremel 335-01 includes an edge guide and circle guide for its compact platform.

Template guides help with pattern work. Check that your router base accepts standard template guide bushings before you buy them.

Dust collection helps with visibility and cleanup. Vacuum adapters are included with some kits, like the DEWALT DW618PKB and SKIL RT1322-00.

Verdict: which plunge router should you buy?

Buy the DEWALT Router DW618PKB if you want one kit for most woodworking. It has the right power, both bases and fine depth control.

Buy the Makita RP1800 if deep plunge capacity matters most. Buy the Dremel 335-01 if your work is small and detailed.

Buy the Bosch 1617EVSPK if you need table mounting plus handheld plunging. Buy the SKIL if LCD speed guidance helps you learn faster.

For a deeper look at uses, read what is a plunge router tool used for. That guide maps each job to the right bit and base.

Pick the router that matches your most common cut. The best plunge router for woodworking is the one you will use often and control with confidence.

Our top 3 picks at a glance

  1. 1 DEWALT Router
    Best for most woodworkers

    DEWALT Router

    9.7/10 our score

    See it on Amazon
  2. 2 Dremel 335-01 Plunger Router Rotary Tool Attachment
    Best for small detail work

    Dremel 335-01 Plunger Router Rotary Tool Attachment

    9.6/10 our score

    See it on Amazon
  3. 3 SKIL 14 Amp Plunge and Fixed Base
    Best for speed control

    SKIL 14 Amp Plunge and Fixed Base

    9.6/10 our score

    See it on Amazon

Frequently asked questions

What is a plunge router used for in woodworking?

A plunge router is used for cuts where you lower the spinning bit straight into the board. That includes mortises, stopped housings, inlays, grooves and decorative shapes that start inside the workpiece.

Our guide to what is a plunge router tool used for breaks down common jobs by bit type.

Should I buy a plunge router or a fixed base router?

Buy a plunge router if you need to start cuts in the middle of a board or control depth in steps. Buy a fixed base router if most work is edge trimming or table work.

Many buyers choose a combo kit so both bases share one motor.

Compare the two styles in our plunge router vs fixed base guide.

Is a cordless plunge router powerful enough?

Cordless models suit light to medium work and jobsite mobility. Full-size corded routers still hold an edge for sustained hardwood cuts and large bits.

If you want battery power, read our guide on how to choose a plunge router cordless before deciding on runtime and bit size.

What size plunge router do I need for cabinet work?

For cabinets, a 2 to 2-1/4 HP combo router handles most face frames, doors and interior cuts. It gives enough power for hardwood without the weight of a 3 HP class tool.

Check plunge depth and collet sizes against your planned bits before you buy.